This medium density polyethylene is an ethylene-hexene copolymer and is tailored for blown film applications that require: - Soft feel - Good toughness, impact strength and tear resistance - Good blending characteristics with HDPE HMW resins Typical applications for HHM TR-131 include: - T-shirt bags - Shopping bags - Trash bags This resin meets these specifications: - FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per Table 2 of 21 CFR 176.170(c) - ASTM D4976 – PE 225 - (EU) No. 10/2011

This high performance medium density polyethylene is an ethylene-hexene copolymer that is tailored for demanding applications that require: - Excellent tensile elongation properties - Outstanding resistance to slow-crack growth - Very good thermal stability Typical applications for HHM TR-392 include: - Irrigation tubing and/or tape This resin meets these specifications: - ASTM D4976 - PE 225 - ASTM D3350, Cell Class PE234320E

This high performance medium density polyethylene is an ethylene-hexene copolymer that is tailored for demanding pressure pipe applications that require: - Good long-term hoop strength - UV stabilizer for good outdoor storage life - Outstanding resistance to slow-crack growth Typical applications for HHM TR-418Q include: - Energy piping systems - Oil field pipe - Industrial pipe When blended with an approved yellow concentrate, this material meets or exceeds: - ASTM D4976 - PE 225 - NSF 3 rd party D2513 certified - ASTM D3350, Cell Class PE234373E and PE234375E - PPI designations PE 2708 and PE 80 - CSA approved for natural gas

This medium density polyethylene resin is an ethylene-hexene copolymer tailored for rotational molding applications that require: - Wide process windows - Excellent impact strength - Good flow - Excellent ESCR - Durability This resin is available in two physical forms: - Pellet form - HMN TR-935 - 35 US mesh powder - HMN TR-935G Typical applications for HMN TR-935 and HMN TR-935G include: - Recreational and agricultural equipment - Toys and carts This resin meets these specifications: - ASTM D4976 - PE 223 - FDA 21 CFR 177.1520(c) 3.2a, - Use conditions B through H per 21 CFR 176.170(c) Table 2 for single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the finished articles are to have a volume of at least 18.9 liters (5 gallons). - NSF / ANSI Standard 61 for potable water (CLD 23) - NSF / ANSI Standard 51 for any food contact (MTU 100 °C) - UL94HB yellow card per UL file E349283 - UL746C (f1) yellow card per UL file E349283 - FMVSS.302 burn test - AS/NZS 4020:2005 (contact with drinking water) - Long term UV stabilization - ASTM 2565 (Cycle 1): Greater than UV-16

This medium density polyethylene resin is an ethylene-hexene copolymer tailored for rotational molding applications that require: - Wide process window - Excellent impact strength - Good flow - Excellent ESCR This resin is available in two physical forms: - Pellet form - HMN TR-938 - 35 US mesh powder - HMN TR-938G Typical applications for HMN TR-938 and HMN TR-938G include: - Industrial waste containers and tanks - Marine equipment - Industrial tanks This resin meets these specifications: - ASTM D4976 - PE 223 - FDA 21 CFR 177.1520(c) 3.2a, - Use conditions B through H per 21 CFR 176.170(c) Table 2 for single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the finished articles are to have a volume of at least 18.9 liters (5 gallons). - UL94HB yellow card per UL file E349283 - UL746C (f1) yellow card per UL file E349283 - FMVSS.302 burn test - AS/NZS 4020:2005 (contact with drinking water) - NSF / ANSI Standard 61 for potable water (CLD 23) - AS/NZS 4766 (polyethylene water and chemical tanks) 4 - Long term UV stabilization - ASTM 2565 (Cycle 1): Greater than UV-16

This medium density polyethylene resin is an ethylene-hexene copolymer tailored for rotational molding applications that require: - Wide process window - Excellent impact strength - Good flow - Excellent ESCR This resin is available in two physical forms: - Pellet form - HMN TR-938 - 35 US mesh powder - HMN TR-938G Typical applications for HMN TR-938 and HMN TR-938G include: - Industrial waste containers and tanks - Marine equipment - Industrial tanks This resin meets these specifications: - ASTM D4976 - PE 223 - FDA 21 CFR 177.1520(c) 3.2a, - Use conditions B through H per 21 CFR 176.170(c) Table 2 for single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the finished articles are to have a volume of at least 18.9 liters (5 gallons). - UL94HB yellow card per UL file E349283 - UL746C (f1) yellow card per UL file E349283 - FMVSS.302 burn test - AS/NZS 4020:2005 (contact with drinking water) - NSF / ANSI Standard 61 for potable water (CLD 23) - AS/NZS 4766 (polyethylene water and chemical tanks) 4 - Long term UV stabilization - ASTM 2565 (Cycle 1): Greater than UV-16

This medium density, high molecular weight hexene copolymer is tailored for geomembrane applications that require: - Outstanding ESCR - Broad fusion range - Excellent melt strength - Good processability Typical geomembrane applications for K306 include: - Landfill liners - Gasoline and chemical tank containment liners - Tunnel moisture barriers - Mine tailing collection projects This resin meets these specifications: - ASTM D4976 - PE 225 - GRI-GM13 except carbon black requirements - FDA 21 CFR 177.1520(c) 3.1a, use conditions C through G per 21 CFR 176.170(c). Volume of food contacting article must be equal to or greater than 5 gallons.

This medium density, high molecular weight hexene copolymer is tailored for geomembrane applications that require: - Outstanding ESCR - Broad fusion range - Excellent melt strength - Good processability Typical geomembrane applications for K307 include: - Landfill liners - Gasoline and chemical tank containment liners - Tunnel moisture barriers - Mine tailing collection projects This resin meets these specifications: - ASTM D4976 - PE 225 - GRI-GM13 except carbon black requirements - FDA 21 CFR 177.1520(c) 3.1a, use conditions C through G per 21 CFR 176.170(c). Volume of food contacting article must be equal to or greater than 5 gallons.

This yellow masterbatch with its medium density polyethylene carrier resin has been formulated for pipe applications that require: - High visibility as gas piping - Good outdoor storage life when blended with natural MDPE containing UV stabilizer - Good long-term hoop strength Let-down Guidelines - Add M358Y3 to the base pipe resin at a 49:1 let-down ratio.

A medium density polyethylene (MDPE) powder compound designed to provide excellent stress crack resistance, better mechanical properties with high rigidity, toughness, gloss and very low warpage. Antioxidants and UV stabilizers are added to ensure protection against degradation by heat or UV irradiation. Safety MDPE MP3840U is classified as no-dangerous material. We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet. Typical Applications MDPE MP3840U has been designed for rotational molding applications as large industrial and agricultural tanks, trash containers, chemical shipping drums and also suitable for injection molding applications such as screw closures, caps and housewares.

A medium density polyethylene (MDPE) powder compound designed to provide excellent stress crack resistance, better mechanical properties with high rigidity, toughness, gloss and very low warpage. Antioxidants and UV stabilizers are added to ensure protection against degradation by heat or UV irradiation. Safety MDPE MP3990U is classified as no-dangerous material. We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet. Typical Applications MDPE MP3990U has been designed for rotational molding applications as large industrial and agricultural tanks, trash containers, chemical shipping drums and also suitable for injection molding applications such as screw closures, caps and housewares.

A medium density polyethylene (MDPE) compound designed to provide excellent corrosion resistance, chemical resistance, abrasion resistance, stiffness and environmental stress crack resistance (ESCR). It is UV stabilized, protected from oxidation, microorganisms and fungi attack and has Low temperature resistance so remains intact and undamaged even after freezing. Safety MP-IRR 3810 is classified as no-dangerous material. We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet. Typical Applications MP-IRR3810 is resistant to saline water, acids and alkaline solutions (excluding highly concentrated solutions) so mainly used in agricultural irrigation systems, water delivery systems, sprinkler and micro-sprinkler stands, assembly dripper sets and automation application.

Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant. Application: rigid flat-slot film; film for diaper manufacturing

Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant. Application: standard grade for the rotational moulding of general purpose products

Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxydant, heat stabilizer, UV stabilizer, dispersant. Application: standard grade for the rotational moulding of industrial use products

Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant. Application: rotational moulding of general purpose rigid products

Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxydant, heat stabilizer, UV stabilizer, dispersant. Application: rotational moulding of industrial use rigid products

Product obtained by gas-phase copolymerization of ethylene with hexane-1 in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant. Properties: ESCR high value. Application: rotational moulding, general purpose containers

Product obtained by gas-phase copolymerization of ethylene with hexane-1 in presence of complex metalorganic catalysts. Stabilization recipe: antacid, antioxydant, heat stabilizer, UV stabilizer, dispersant. Properties: ESCR high value. Application: rotational molding, industrial use containers, including containers for chemicals storage

Product obtained by gas-phase copolymerization of ethylene and hexane-1 in presence of complex metalorganic catalysts. It incorporates very high long-term thermal stability, strength, thermal-oxidative degradation resistance during PE production, processing and use of PE-made articles. Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant. Application: rotational moulding, ESCR high value.

Product obtained by gas phase copolymerization of ethylene and hexene-1 over organometallic catalyst complexes. Characteristics: enhanced long-term thermal stability, strength, thermal-oxidative resistance in PE processes. Stabilizers: antacid, antioxidant, heat stabilizer, dispersant. Application: rotational moulding, high ESCR.

Hexene Copolymer MDPE Rotational Molding Resin

Hexene Copolymer MDPE Rotational Molding Resin

Hexene Copolymer MDPE Rotational Molding Resin

Hexene Copolymer HDPE Rotational Molding Resin

Hexene Copolymer MDPE Rotational Molding Resin

HD3840UA is a medium density polyethylene with narrow molecular weight distribution. It is suitable for rotational molding including some injection molding applications such as technical parts and closures. HD3840UA has UV-stabilizer which offers good impact resistance, high environmental stress cracking resistance and has excellent surface finish. It is supplied in pellet form. APPLICATIONS Blow-molded containers up to 5 liters for packaging: - Large Tanks (up to 30,000L) - Silos - Engineering Parts - Toys

Petrothene HR92953 is a medium density polyethylene-based resin selected by customers for use as jacketing for communications cable, including CATV and FOC. HR92953 has a nominal carbon black content of 2.6% and antioxidant has been added to ensure thermal stability during processing. Petrothene HR92953 meets the requirements of the following: ASTM D 1248, Type II, Class C, Category 4, Grades E10 and J5; Federal LP390C, Type III, Class M, Category 4, Grade 3.

Petrothene NA271009 is a medium density polyethylene resin selected by customers for overwrap film and other films requiring good stiffness and optics. NA271009 exhibits good film optics and high stiffness.

Petrothene NA272130 is a medium density polyethylene resin selected by customers for overwrap film applications. NA272130 exhibits good film optics and high stiffness.

Petrothene NA285003 is a medium density polyethylene resin selected by customers for blown or cast film extrusion. Typical applications include overwrap film. This product exhibits good film optics and high stiffness.

Petrothene NA324009 is a medium density homopolymer resin selected by customers for blow molding applications. NA324009 provides good clarity, toughness and processability. Typical applications include flexible containers, squeeze bottles and toys.

Petrothene NA324013 is a low density homopolymer resin selected by customers for overwrap packaging and household film. NA324013 provides excellent optical properties and good stiffness for improved machineability.

Petrothene NA324244 is a low density homopolymer resin selected by customers for overwrap packaging and household film. NA324244 provides excellent optical properties and good stiffness for improved machineability.

MP300JA is a polyethylene based adhesive polymer containing anhydride functionality. This grade is for powder coating of steel pipe, so it is powdered in disk type grinder. MP30JA has high physical properties originated from MDPE and shows excellent adhesion strength and processibility. * powder type, color of pellet : gray

Excellent proformace on high stalk lines Excellent overall balance

Medium density pipe compound suitable for trickle irrigation and other specialty pipe applications.