Formulated with an Antimicrobial Additive to prevent the spread of Bacteria within the product

Dowlex™ 2006G Polyethylene Resin is an ethylene 1-octene copolymer, suitable for cast film applications and also perfectly designed to give excellent filler acceptance and low torque during compounding. Dowlex™ 2006G offers superior stiffness and excellent temperature resistance making it the perfect partner for down gauging. Films produced using Dowlex™ 2006G offer low shrinkage which is ideal when registered printing is used. Main Characteristics: - Optimum extruder output and process ability, pure or in blends - Superior stiffness and temperature resistance Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520(c )3.2a Consult the regulations for complete details.

DOWLEX™ 2342M Polyethylene Resin is a high density ethylene/octene copolymer resin. It has a unique molecular structure with a linear polyethylene backbone and controlled octene side branches, which provides a combination of flexibility with very high toughness and stress crack resistance. A specified carbon black masterbatch is incorporated into the DOWLEX 2342M Polyethylene Resin during extrusion to arrive at a fully stabilised, homogeneous black sheet with excellent weldability. Sheeting thus produced meets the requirements of the Guidelines and Directives controlling general water barrier membranes such as the North Rhine Westfalia Guidelines or "Guideline for Plastic Membranes in Landfill sites" issued 7/92 from B.A.M. Berlin. Processability: Typical extrusion temperature range for DOWLEX 2342M Polyethylene Resin is 190 to 230 °C. The resin contains processing stabilisers compatible with those in the Masterbatch added to guarantee short and long term processing, thermal and environmental stability including metal deactivators. Applications: - Heavy sheeting. - General water barrier membranes.

DOWLEX™ 2750ST Polyethylene Resin is suitable for the production of high modulus blown and cast films. The resin offers an excellent balance of tensiles, tear and impact strength with good optics, and can be used to enable the reduction in gauge of various film structures. Applications: - Various industrial, consumer and specialty films. Complies with: - EU, No 10/2011 Consult the regulations for complete details.

- High Density Polyethylene Resin (HDPE) - For reusable cases - Excellent processability, easier flow - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOWLEX™ IP 10 Polyethylene Resin is an Improved Processing high density resin specifically designed for reusable case applications including: poultry, fast food, automotive, retail, fresh produce, beverages, food service and chemicals, including plastics. Excellent processability is achieved with this resin due to its easy flow at low temperatures.

- High Density Polyethylene Resin (HDPE) - For food container applications - Excellent processability and impact resistance - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. DOWLEX™ IP 40 Polyethyelne Resin is an Improved Processing high density resin designed to offer the excellent processing and impact resistance required for food container applications. This resin was designed by optimizing the breadth, shape and peak molecular weight, and has demonstrated both excellent impact and processability over a wide range of conditions.

- High Density Polyethylene Resin (HDPE) - For food containers, overcaps and general purpose applications - ESCR processability and rigidity Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA-DMF - Canadian HPFB No Objection (With Limitations) Consult the regulations for complete details. DOWLEX™ IP 41 Polyethylene Resin is an Improved Processing high density resin designed to offer excellent processability and rigidity for food containers, overcaps and other general purpose applications. DOWLEX IP 41 resin balances peak molecular weight with a proprietary, optimized molecular weight distribution and a slightly higher density for excellent rigidity. This resin has demonstrated excellent processability over a wide range of processing conditions.

DOW™ DGDA-6098 NT 7 High Density Polyethylene Resin is a HDPE resin designed for use in a variety of blown film applications where excellent processability, stiffness and clarity are needed. Main characteristics: - High melt strength - Easy to process - High stiffness. - High clarity Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) Consult the regulations for complete details.

For Extrusion Coating Applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a Consult the regulations for complete details.

DOW HDPE 05962B is a High Density Polyethylene produced via SOLUTION™ technology. This resin presents a narrow molecular weight distribution that offers excellent impact resistance in rigid packaging, high gloss, excellent stiffness and processability. Main Characteristics - Resin for Injection Molding - Pails and Crates - Resin for Cast film - Film for diapers, femine hygiene Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 Consult the regulations for complete details

DOW HDPE 08454N Resin is a narrow molecular weight distribution copolymer designed to offer excellent impact strength and toughness with good stiffness. This resin has good processability over a wide range of molding conditions. - For structural foams, industrial containers, cases/crates - Excellent impact strength, toughness and good stiffness Complies with: - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA-DMF - U.S. USP Consult the regulations for complete details.

- For toys and housewares - Good low temperature impact strength, gloss and excellent toughness - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. DOW HDPE 17450N is a narrow molecular weight distribution copolymer designed to offer low temperature impact strength and gloss with excellent toughness. This resin has good processability over a wide range of molding conditions.

POLYETHYLENE HIGH DENSITY 25055E High Density Polyethylene Resin is a very narrow molecular weight distribution resin, developed to impart excellent mechanical properties, high gloss and high surface finishing to injection moulded parts, while providing easy processing. Applications: - Housewares - Food containers - Toys Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 - Canadian HPFB (No Objection) Consult the regulations for complete details.

HDPE 35054L is a bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance of mechanical properties and a very high Environmental Stress Cracking Resistance (ESCR). Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Lubricants -- Car care products -- Toys -- Automotive Parts Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulation for complete details

HDPE 35057L is a Bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance between stiffness and Environmental Stress Crack Resistance (ESCR). It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - FDA regulation 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

DOW™ HDPE 35060A is a High Density Polyethylene resin produced in the Slurry Process. This resin presents good impact and environmental stress cracking resistance. Its high density allows reducing the weight of the container while maintaining good rigidity. Main Characteristics: - Used in the production of jars for detergents, mineral oils, cleaning products, food, cosmetics - Containers - Toys - Parts for cars Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - EU, No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 35060L is a High Density Polyethylene intended for Blow Molding applications. The bimodal molecular weight distribution of this resin leads to a high environmental stress crack resistance without sacrificing the rigidity (density). Its high density allows for weight reduction keeping the container performance. It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 40055L HF is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers. The viscosity of this resin has been specially tailored for machinery that requires slightly higher fluidity than the one provided by the Dow™ HDPE 40055L. Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc.) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with Regulation: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12. Consult the regulation for complete details

HDPE 40055L is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance (ESCR) with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with: - FDA regulation 177.1520(c)3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 80017 is a High Density Polyethylene, copolímero of medium molecular weight, produced in the Slurry Process. This resin presents an excellent balance of properties and processability. Because of its molecular structure, this material combines a high impact resistance and Environmental Stress Cracking Resistance (ESCR), with high rigidity, suitable for the fabrication of corrugated pipes of single and double wall. Main Characteristics: - Corrugated pipes of single and double wall - Pipes for drain and waste - Complies with FDA 21 CFR 177.1520(c) 3.2a - Consult the regulation for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

DOW™ HDPE 8262B is high density resin designed for use in reusable boxes and drawers as well as injection of rigid parts. Main Characteristics - High Density Polyethylene Resin (HDPE) - Excellent processability, UV stabilized Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

Industrial Standards Compliance: - ASTM D 3350: cell classification PE445520A (See NOTES 1) - American Association of State Highway and Transportation Officials (AASHTO) M294/MP7 (See NOTES 2) DOW DGDA-2485 NT High Density Polyethylene resin is produced using UNIPOL™ II process technology and meets the needs of a wide variety of end uses including profile extrusion applications such as corrugated pipe. It combines excellent ESCR/NCLS with superior toughness and processability. NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (2) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

DOW DGDA-5004 NT 7 High Density Polyethylene (HDPE) resin is a multi-purpose polymer designed for sheet extrusion and thermoforming applications, including single-serve disposables and other thin walled containers. Main Characteristics: - Maximum rigidity - High Impact Strength - Good Top Load Strength - Optimized Shear Rheology for Good Processability - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Consult the regulations for complete details.