Polyethylene (PE): HDPE
製品 | 可用性 | 製品の説明 |
---|---|---|
InnoPlus HD6000F | アジア太平洋地域 |
InnoPlus HD6000F is high density polyethylene film grade which has special feature of output increment, good processability and drawdownability. This grade is suitable for high productivity or high speed machine to produce ultra thin films and general purpose films. InnoPlus HD6000F exhibits high mechanical strength, good stiffness and good heat sealability.
Typical Application : bags on roll, shopping bags, T-Shirt bags, plastic gloves and other general purpose bags
|
InnoPlus HD6001C | アジア太平洋地域 |
InnoPlus HD6001C is bimodal high density polyethylene with outstanding environmental stress cracking resistance (ESCR) with excellent organoleptic properties. This grade is suitable for carbonated beverages and sparkling water caps and closures for both common and new designs. They show good processability in compression molding machine.
Additive : non slip agent grade
Typical Application : Caps and closures for carbonated soft drink and sparkling beverage.
|
InnoPlus HD6200B | アジア太平洋地域 |
InnoPlus HD6200B and HD6600B are high density polyethylene blow molding grade with optimum balance of processability, environmental stress cracking resistance (ESCR) and impact strength. They are used for wide variety blow molding applications of small to medium size container and multi use grade from high ESCR to normal ESCR.
Typical Application : Personal care containers, Cosmetic containers, Detergent containers, Lubricant oil containers
|
InnoPlus HD6600B | アジア太平洋地域 |
InnoPlus HD6200B and HD6600B are high density polyethylene blow molding grade with optimum balance of processability, environmental stress cracking resistance (ESCR) and impact strength. They are used for wide variety blow molding applications of small to medium size container and multi use grade from high ESCR to normal ESCR.
Typical Application : Personal care containers, Cosmetic containers, Detergent containers, Lubricant oil containers
|
InnoPlus HD6602B | アジア太平洋地域 |
InnoPlus HD6602B is high density polyethylene blow molding grade with optimum balance of processability, environmental stress cracking resistance (ESCR) and impact strength. They are used for wide variety blow molding applications of small to medium size container and multi use grade from high ESCR to normal ESCR.
Typical Application : Personal care containers, Cosmetic containers, Detergent containers, Lubricant oil containers
|
InnoPlus HD7000F | アジア太平洋地域 |
InnoPlus HD7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness.
Typical Application : Shopping bags, T-Shirt bags, Bags on roll, Garbage bags, Re-sealable bags, sanitary bags, Plastic gloves
|
InnoPlus HD7000H | アジア太平洋地域 |
InnoPlus HD7000H is high density polyethylene which has outstanding mechanical strength, good weathering resistance and excellent product appearance. It is suitable to produce not only truck-bed liner from sheet extrusion and thermoforming process but also automotive fuel tanks from blow molding process.
Typical Application: Truck-bed liner, Automotive fuel tank
|
InnoPlus HD8100M | アジア太平洋地域 |
InnoPlus HD8100M is a natural color-high density polyethylene pipe grade which is certified as PE 100. InnoPlus HD8100M is bimodal resins exhibit excellent creep resistance and chemical resistance properties. This grade is suitable for high quality pressure pipes, produced by conventional pipe extrusion process.
Typical Application : High pressure and High temperature pipes; Drinking water pipes, Industrial pipes and Sewer pipes.
|
INNOPOL® PE CS 5-8250 W | 欧州 |
INNOPOL ® CS 5-8250 W is a 50% chalk filled compound based on high density polyethylene. This grade is available only in white coloured form.
Recommended application
INNOPOL ® CS 5-8250 W is developed for packaging film production.
|
INTREPID™ 2498 BK | ラテンアメリカ |
INTREPID™ 2498 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is intended for use in industrial piping system where extreme conditions such as high pressures, elevated temperatures and aggressive chemicals or hydrocarbons exist. Suitable uses include oil & gas field pipelines, gas distribution pipelines, and other industrial applications.
Industrial Standards Compliance:
ASTM D 3350: cell classification
- Black - PE445576C (MRS) (See NOTES 1)
- Black - PE445574C (HDB) (See NOTES 1)
Plastics Pipe Institute (PPI): TR-4
- Black Pipe - INTREPID 2498 BK (See NOTES 1)
-- ISO PE100 pipe grade - MRS 10 @ 20°C
-- ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F
NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).
|
INTREPID™ 2498 NT | ラテンアメリカ |
INTREPID™ 2498 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is intended for use in industrial piping system where extreme conditions such as high pressures, elevated temperatures and aggressive chemicals or hydrocarbons exist. Suitable uses include oil & gas field pipelines, gas distribution pipelines, and other industrial applications.
Industrial Standards Compliance:
ASTM D 3350: cell classification
- Black - PE445576C (MRS) (See NOTES 1)
- Black - PE445574C (HDB) (See NOTES 1)
Plastics Pipe Institute (PPI): TR-4
- Black Pipe - INTREPID 2498 BK (See NOTES 1)
-- ISO PE100 pipe grade - MRS 10 @ 20°C;
-- ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F
NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).
|
INTREPID™ 2499 NT | ラテンアメリカ |
INTREPID™ 2499 NT Bimodal Polyethylene Resin is a Polyethylene resin produced with raised temperature capability (PE-RT) using UNIPOL™ II process technology. This product is intended for use in municipal and industrial piping systems where extreme conditions such as high temperatures, aggressive chemicals, hydrocarbons, or highly oxidative conditions exist. Suitable uses include oil and gas field pipelines, gas distribution pipelines, mining pipelines, district heating systems, municipal water distribution and other industrial applications.
Industrial Standards Compliance:
ASTM D3350: cell classification:
-- Natural - PE445574A CCO
-- Black - PE445574C CC3 (See Notes A and B)
Plastics Pipe Institute (PPI): TR-4
-- Natural Pipe INTREPID 2499 NT Bimodal Polyethylene Resin
-- ASTM PE4710 pipe grade - 1600psi HDB @ 73 °F (23°C)
-- ASTM PE4710 pipe grade - 800psi HDB @ 180 °F (82.2°C)
-- Black Pipe INTREPID 2499 BK Bimodal Polyethylene Resin (See Note B)
-- ASTM PE4710 pipe grade - 1600psi HDB @ 73 °F (23°C)
-- ASTM PE4710 pipe grade - 800psi HDB @ 180 °F (82.2°C)
NSF International: Standard 14 and 61
-- Natural Pipe INTREPID 2499 NT
-- Black Pipe INTREPID 2499 BK (See Note B)
NOTES:
(A)The first 5 numbers of the cell classification are based on natural resin. The last number and letter are based on
black resin. (natural resin plus 6.5% DFNF-0092).
(B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 BK (6.5%)
|
Inverko e-H0599 | アジア太平洋地域 | |
Inverko HDPE Regranulaat | アジア太平洋地域 | |
Inverko HDRG9901 | アジア太平洋地域 | |
Jam 36XF6 | アジア太平洋地域 |
36XF6 is a HP-HDPE grade for raffia for ropes, monofilament and manual strapping applications. This grade show good processability and produces items with high tenacity.
Features
- HP-HDPE grade for raffia for ropes
- Good processability
- High tenacity
Applications
- Stretched application grade
- Raffia for ropes
|
Jam 41X01 | アジア太平洋地域 |
41X01 is a HP-HDPE grade for cast flat yarn (raffia) and monofilament applications.
Good processability and high yarn tenacity are the main feature of this grade.
Features
- HP-HDPE grade
- Good processability
- high yarn tenacity
Applications
- Stretched application grade
- Cast flat yarn (raffia)
|
Jam 43X01 | アジア太平洋地域 |
43X01 is a HP-HDPE grade for monofilament applications.
Good processability and high tenacity are the main feature of this grade.
Features
- Good processability
- high tenacity
Applications
- Stretched application grade
- Monofilament
|
Jam 486H2 | アジア太平洋地域 |
486H2 is a HDPE copolymer for blown film, general purposes. This grade is wall suited for film applications requiring a good pracessability, and outstanding mechanical properties.
Features
- Grade under final development, to be industrialised.
Applications
- Blown Film
- High Mechanicals
|
Jam 50401 | アジア太平洋地域 |
50401 is a HDPE grade for monofilament applications, which combines good processability with high tenacity.
50401 is also well suited for multiply applications, like ropes.
Features
- HDPE grade
- good processability with high tenacity
- well suited for multiply applications
Applications
- Stretched application grade
- Monofilament
|
Jam 524H1FX | アジア太平洋地域 |
524HIFX is a HDPE copolymer suitable for production of high stiffness blown film. This grade shown outstanding bubble stability at high film line speed and at low downgauging. It is well suited for monolayer film, blending and coextrusion.
Features
- HDPE copolymer suitable
- high stiffness blown film
- Grade under final development, to be industrialised.
Applications
- Film grade
- monolayer film
|
Jam 52511 | アジア太平洋地域 |
52511 is a HDPE copolymer injection molding grade for applications requiring a good balance between physical properties and flowability, like housewares and toys.
Features
- Good balance between physical properties and flowability
Applications
- injection molding grade
- Houseware
|
Jam 52528 | アジア太平洋地域 |
52528 is a HDPE copolymer injection molding grade for thin walled applications requiring a good balance between high flowability and physical properties.
Features
- Good balance between high flowability and physical properties.
Applications
- injection molding grade
- Caps
- Thin walled
|
Jam 526F2BX | アジア太平洋地域 |
526F2BX is a HDPE copolymer for small containers blow molding. This grade is well suited for applications requiring good processability, physical properties and resistance to environmental stress cracking.
Features
- Grade under final development, to be industrilised.
- HDPE copolymer
- good processability
- physical properties and resistance to environmental stress cracking.
Applications
- Blow moulding
- small containers
- blow molding
|
Jam 526H1 | アジア太平洋地域 |
526H1 is a HDPE copolymer for rigid blown film, with high molecular weight, and broad molecular weight distribution. 526H1 is well suited for applications requiring the best compromise between a good processability and outstanding film stiffness.
Features
- HDPE copolymer for rigid blown film
- high molecular weight and broad molecular weight distribution.
- best compromise between a good processability and outstanding film stiffness
Applications
- Film grade
|
Jam 534F7 | アジア太平洋地域 |
The 534F7 is a HDPE grade for monofilament applications, which combines a good processability with a very high tenacity. This grade is suitable for multiplies filaments too.
Features
- high tenacity
- good processability with a very high tenacity
- HDPE grade
Applications
- Monofilament
|
Jam 60505/UV | アジア太平洋地域 |
60505 is a HDPE injection molding grade which combines high stiffness with good physical properties.
This resin is well suited for crates and toys applications.
Features
- High stiffness with good physical properties.
Applications
- injection molding grade
- Crates
- toys applications
|
Jam 60511 | アジア太平洋地域 |
60511 is a HDPE injection molding grade which combines excellent flowability with high stiffness.
This resin is well suited for housewares and toys applications.
Features
- Excellent flowability with high stiffness.
Applications
- injection molding grade
- Houseware
- toys
|
Jam 60518 | アジア太平洋地域 |
60518 is a HDPE injection molding grade which combines excellent flowability with high stiffness.
This resin is well suited for housewares and toys applications.
Features
- HDPE injection molding grade
- excellent flowability with high stiffness.
Applications
- Injection molding grade
- housewares and toys applications
|
Jam 60535 | アジア太平洋地域 |
60535 is a HDPE injection molding grade for thin walled applications. requiring very high flowability and stiffness.
Features
- HDPE injection molding grade
- very high flowability and stiffness
Applications
- injection molding grade
- Thin walled
|
Jam HC7260* | アジア太平洋地域 |
For transport and stacking crates, particularly bottle crates.
Features
- Low war page
- good impact strength
- good stress uracil resistance
Applications
- Injection moulding
|
Jam HC7260 | アジア太平洋地域 |
For transport and stacking Cvates porticularly bottle cvates
Features
- low warpage
- good impact strengh
- good stress crack resistace.
Applications
- Injection moulding
|
Jam HD-52505/UV | アジア太平洋地域 |
52505 is a HDPE copolymer which is manufactured in gas phase process. This grade is an injection molding grade for applications requiring a good physical property even at low temperatures, like pails, containers and technical moldings.
Features
- Good physical property even at low temperatures.
Applications
- Containers
|
Jam HD-52518 | アジア太平洋地域 |
HD-52518 is a HDPE copolymer which manufactured by gas phase process. This grade is LLDPE Injection Moulding, Extrusion Coating & Rotomoulding. Injection molding for application requiring a good balance between easy of processability and flowability and mechanical properties are the special perpuse of this grade.
Features
- Good balance between easy of processability and flowability
Applications
- Housewares
- High fluidity
|
Jam HD-60507/UV | アジア太平洋地域 |
60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties. This resin is well suited for general purpose application requiring high stiffness.
Features
- Good flowability with balanced phisycal peoperties.
Applications
- Crates
- Injection molding grade
|
Jam HD-7255(I4) | アジア太平洋地域 |
HD-7255 is an injection molding resin which is manufactured by the suspension polymerization of ethylene monomer. This grade apply in thick walled containers making which are used for liquid transportation. This grade is applicable in designing the vessels for high stressed transportation.
Features
- High impact Strength and low warpage
Applications
- Thick walled
- Highly stressed transport containers e.g. refuse bins and Fish crates
- Injection moulding
|
Jam HD7255* | アジア太平洋地域 |
For thick walled, highly stressed transport containers. e.g refuse bins and fish crates.
Features
- High impace streng
- low warpage
Applications
- Injection moulding
|
Jam HD7255 | アジア太平洋地域 |
For thick walled, highly stressed transport containers. e.g refuse bins and fish crates.
Features
- High impace streng
- low warpage
Applications
- Injection moulding
|
Jam HD-7260 (I3) | アジア太平洋地域 |
HD-7260 is an injection molding resin which is manufactured by the suspension polymerization of thylene monomer. HD-7260 (I3) is a high density polyethylene with 1-Butene as co monomer. This grade apply for transport and stacking , bottle crates, engineering parts , closures and etc.
Features
- low warpage High density, hardness and stiffness.
- Good impact strength and good stess cracking resistance
Applications
- Injection moulding
- Crates
- Engineering parts
- Closures
|
Jam HF-4760(BL3) | アジア太平洋地域 |
HF-4760(BL3) is a blow molding grade resin with high density polyethylenee with 1-Butene as co monomer which is manufactured by the suspension polymerization of ethylene monomer. Stiffness, good ESCR are it's spetial properties. High rigidity and good flowablity which made it proper for usage in bottles and small blow molding goods.
Features
- High density and Stiffness
- Good flowabilitty and impact Strength
- Good Stress Cracking resistance.
Applications
- Small blow moulding Bottles
- Containers (up to 5 lit )
- Packing of pharmaceuticals & surfactants
|