Hifax CA 7320 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is designed for use in compounds where it shows high efficiency as impact modifier. It gives excellent processability whilst maintaining optimum mechanical properties. The grade is available in natural pellet form.

Hifax CA 7378 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for injection molding controlled shrinkage applications (e.g. automotive exterior or interior). Hifax CA 7378 A exhibits high melt flow rate with good impact/stiffness balance and reduced shrinkage. The grade is available in natural pellet form.

Hifax CA 7441 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for extrusion processes. It exhibits low stiffness, low hardness, combined with a high melting point and low fluidity. The grade is available in natural pellet form.

Hifax CA 7442 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is primarily used for bumper and exterior trim applications in Automotive but can also be used as a base resin for technical compounds. It has a high impact performance and reduced shrinkage. The material also exhibits good processability. The grade is available in natural pellet form.

Hifax CA 1147 A is a thermoplastic polyolefin developed for extrusion processes, particularly for the Wire & Cable industry. Thanks to its high rubber content and structure, the main features are low stiffness, low hardness, combined with a high melting point and a medium fluidity.

Hifax CA60A NA 848 BLACK is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity, Hifax CA60A NA 848 BLACK shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins.

This is a provisional internal only product data sheet to allow creation of MSDS and RAPIDS. When material is commercialized a full product data sheet will be completed by responsible BU.

Hifax DBF 190 D is an flexible non halogenated flame retardant compound developed for wire and cable jacketing/shielding isolation based on grades produced by Basell's propieratory Catalloy technology. The grade is designed for an excellent balance of mechanical properties and for a good thermal aging resistance by providing good electrical properties. Hifax DBF 190 D contains metal desactivators for use with metal conductors. It is used by our customers for the production of low voltage cables. The material is available in natural pellet form.

Hifax DBS 189 D is an flexible compound developed for wire and cable primary isolation based on grades produced by Basell's propieratory Catalloy technology. The grade is designed for an excellent balance of mechanical properties and for a good thermal aging resistance by providing good electrical properties. Hifax DBS 189 D contains metal desactivators for use with metal conductors. It is used by our customers for the production of low voltage cables. The material is available in natural pellet form.

HIFAX DG232 2693 is a high impact, medium flow, rubber modified grade for use in Automotive applications

Hifax EKC 244X 1 Black is a 40% talc filled, impact modified concentrate. This grade can be used in combination with Hifax EP 3080 as open compound concept.The product is available in black color, pellet form.

Hifax EKC 244X 1 Black is a 40% talc filled, impact modified concentrate. This grade can be used in combination with Hifax EP 3080 as open compound concept.

Hifax EYC335P is a 17% mineral fillled high impact copolymer for injection moulding. The grade features very high fluidity and low coefficient of dilatation. Typical customer applications are unpainted and painted bumpers. The grade is available in custom colour.

Hifax RTA3223 medium melt flow, 1,600 MPa flexural modulus, paintable, mineral filled thermoplastic olefin (TPO) resin has a very good combination of strength, stiffness and dimensional stability. It was designed primarily for rigid automotive exterior ornamentation applications. Typical applications include automotive claddings and rocker panels, license plate brackets, appliques, filler panels and grilles.

Hifax RTA3263UV medium melt flow 1,600 MPa flexural modulus, paintable, mineral filled thermoplastic olefin (TPO) resin has balanced rigidity, impact strength and dimensional stability. It was designed primarily for rigid automotive exterior ornamentation applications requiring good weatherability. Typical applications include automotive claddings, rocker panels, license plate brackets, appliques and filler panels.

High Impact filled grade with very high scratch resistance added mould release

High impact filled grade with very high scratch resistance.

TKC220X 1 is a High Impact filled grade

"Hifax" TKS 428P is an unfilled, impact modified grade for spoiler applications with excellent impact/stiffness balance, good flowability, tiger stripe free and UV stabilized. The grade has been specifically designed for moulding large complex parts that require high impact strength as well as good stiffness.

Hifax TKS 672P 2066 is a medium melt flow, soft TPO compound based on LyondellBasell's proprietary Catalloy process resin. Product is available as a customized color matched, pellet form. This grade is delivered in 2066 color version.

Hifax TRC 779P HA 9B9 BLACK is a talc filled impact modified grade that is typically used for exterior trim applications that has excellent Impact-Stiffness balance and good flowability properties.

High Impact filled UV stabilised grade with very good processing and aesthetic appearance, good scratch resistance.

High Impact filled UV stabilised grade with very good processing and aesthetic appearance, good scratch resistance.

Super soft UV-resistant grade for exterior automotive applications like spoilers.

Hifax TRS 372P is an unfilled PP copolymer, with excellent processability, excellent impact resistance and good UV resistance. This product is also available in other colors, new colors can be developed depending on customer requirements.

Hifax TSOP EM7 BLACK is a mineral filled polypropylene for injection moulding. It exhibits a superior balance of flowability, stiffness and impact. The product has a UV resistance designed for outdoor applications with good processability. This grade is available in custom colour, pellet form.

Hifax TYC 1168P 207D CHARCOAL very high melt flow for easy and fast molding and has low density, which reduces part weight. It has good stiffness and excellent cold temperature impact. It is typically used for mold-in color exterior trim and fascia applications.

Hifax TYC 1168X BLK very high melt flow for easy and fast molding and has low density, which reduces part weight and improves paint adhesion. Good stiffness and excellent cold temperature impact. It is typically used for fully painted exterior trim and fascia applications.

Hifax TYC 1229P is a high flow thermoplastic polyolefin designed for automotive and heavy-truck applications that require energy management combined with ductility, stiffness and impact resistance over a broad temperature range. This material exhibits excellent processability and dimensional stability.

Very high flow, impact resistant, mineral filled grade designed for exterior applications

Mineral filled polypropylene for injection moulding. It exhibits a superior balance of flowability, sitffness and impact. The product has a UV resistance designed for outdoor applications with good processability. This grade is available in custom colour, pellet form.

TYC852X E is a low CLTE, high fluidity, high impact grade designed to be used for exterior automotive parts

Hifax TYC1175P G01 Black is a very high melt-flow TPO compound designed for automotive application, UV stabilized.

Hifax TYC1175X Black is a very high melt-flow TPO compound designed for automotive applications.

Very High flow ,Impact resistant, mineral filled grade filled grade designed for exterior applications

Very High flow ,Impact resistant, mineral filled grade filled grade designed for exterior applications

Very High flow ,Impact resistant, mineral filled grade filled grade designed for exterior applications

TYC852P E is a low CLTE, high fluidity, high impact grade designed to be used for unpainted exterior automotive parts

Hifax X 1956 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. This grade is primarily used in polyolefin-based compounds to improve mechanical properties and enhance moulded part appearance. In particular, the product is used by our customers for providing tiger stripe resistance and improved aesthetics for unpainted automotive components. The grade is available in natural pellet form.