Polyurethane (PUR): PUR-エテール
製品 | 可用性 | 製品の説明 |
---|---|---|
ADEKA AM series | アジア太平洋地域 |
Glycerin-PO / EO type
Coatings, adhesives, elastomers, sealants
|
ADEKA BM series | アジア太平洋地域 |
Ethylenediamine- PO / EO type
Rigid foams, semirigid foams, cross-linking agents
|
ADEKA BPX series | アジア太平洋地域 |
Bisphenol A-PO type
Coatings, adhesives, elastomers
|
ADEKA CM series | アジア太平洋地域 |
PG-PO / EO type
Coatings, adhesives, elastomers, sealants
|
ADEKA EDP series | アジア太平洋地域 |
PO modified ethylenediamine type
Rigid foams, semirigid foams, cross-linking agents
|
ADEKA FC-450 | アジア太平洋地域 |
Phosphorated flame-retardant polyols
Fire-retarding material (Rigid urethane foams)
|
ADEKA G series | アジア太平洋地域 |
Glycerin-PO type
Various polyurethane foams, coatings, elastomers
|
ADEKA GR series | アジア太平洋地域 |
Glycerin -PO / EO type
Water-absorbing urethane foams, adhesives
|
ADEKA P series | アジア太平洋地域 |
PG-PO type
Coatings, adhesives, elastomers, sealants
|
ADEKA PR series | アジア太平洋地域 |
PG-PO / EO type
Water-absorbing urethane foams, adhesives
|
ADEKA SC,SP series | アジア太平洋地域 |
PO modified sucrose/sorbitol type
Rigid foams, cross-linking agents
|
ADEKA T series | アジア太平洋地域 |
TMP-PO type
Rigid foams, semirigid foams, cross-linking agents
|
Desmoderm® 43191 | アジア太平洋地域 |
Desmoderm 43191 Granular is a one-component polyester polyether urethane based on an aromatic diisocyanate.
|
Desmoderm® VPLS 2262 | アジア太平洋地域 |
Desmoderm VP LS 2262 is a one-component polyether urethane based on an aromatic diisocyanate.
|
EFRHATAN 88 A | 欧州 |
EFRHATAN: is the trade-mark of our modified polyurethane-polyether flame retardant halogen free.
EFRHATAN 88 A: is a thermoplastic elastomeric polyurethane HFFR compound polyether basis.This compound offer outstanding chemical and hydrolysis resistance. The material exhibit excellent physical-mecanical performances resulting in tubes and sheatings with optimal kink resistance,strength characteristics and flame retardance. Good processability and excellent extrusion stability. Material to use on the production of cables for electronic devices connection and thechnical sheathing with matt surface.
Certify: UL 1581FT1
|
Evermore PUR UDA-10X | アジア太平洋地域 | |
Evermore PUR UDA-10XL | アジア太平洋地域 | |
Evermore PUR UDA-10XT | アジア太平洋地域 | |
Evermore PUR UP-9315N | アジア太平洋地域 | |
Evermore PUR UP-9320N | アジア太平洋地域 | |
Evermore PUR UP-9321N | アジア太平洋地域 | |
Evermore PUR UP-9330N | アジア太平洋地域 | |
Evermore PUR UP-9341NHR | アジア太平洋地域 | |
Evermore PUR UP-9396NHR | アジア太平洋地域 | |
Evermore PUR UP-9460NHR | アジア太平洋地域 | |
Generic PUR-Ether | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PUR-Ether
This information is provided for comparative purposes only.
|
Huafon JF-P-501 / JF-I-601 | アジア太平洋地域 |
Characteristics: Polyether resin of low hardness and low density.
Applications: For the insole.
|
Huafon JF-P-509 / JF-I-609T | アジア太平洋地域 |
Characteristics : Polyether resin of medium to high hardness. excellent temperature and hydrolysis resistance.
Applications: For man/woman shoes and casual shoes.
|
Huafon JF-P-526 / JF-I-609T | アジア太平洋地域 |
Characteristics: Polyether resin of medium to high hardness, excellent temperature and hydrolysis resistance.
Applications: For the midsole.
|
Huafon JF-P-528 / JF-I-609T | アジア太平洋地域 |
Characteristics: Polyether resin of high flexibility. excellent temperature and hydrolysis resistance.
Applications: For the boot.
|
Huafon JF-P-550S / JF-I-650 | アジア太平洋地域 |
Characteristics: Polyether resin of low hardness and low density.
Applications: For the insole.
|
Huafon JF-P-8985 / JF-I-5218 | アジア太平洋地域 |
Characteristics: Polyether resin of excellent physical performance. excellent temperature resistance and excellent hydrolysis resistance.
Applications: For buffers.
|
HydroMed™ D1 | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D2 | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D3 | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D4 | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D6 | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D640 | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroMed™ D7 | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|
HydroSlilp™ C | 北アメリカ |
HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets.
This material does not require UV curing and as such, provides a superior alternative to UV curable materials for devices which require inner lumen or complicated form coatings.
These materials were designed for use as coatings for a wide array of devices including catheters, guidewires, sutures, introducers, rods, and valves.
The HydroMed series can also be coated onto devices to reduce the absorption of white cells and proteins, thereby aiding in the analysis of blood and DNA.
HydroMed is processed by traditional solvent coating methods. The polymer granules can be dissolved in varying concentrations using most organic and inorganic solvent packages.
AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.
These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.
In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.
With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.
|