Polyurethane (PUR): PUR、未指定
製品 | 可用性 | 製品の説明 |
---|---|---|
Foam-It™ 8 | アジア太平洋地域 |
Smooth-On's FOAM-iT!™ Series are two-component water blown rigid foams that are versatile and easy to use. FOAM-iT!™ products are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed in equal amounts by volume (Note: FOAM-iT!™ 8 is measured and mixed 2A:1B by weight). The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which FOAM-iT!™ product you are using) and develop a uniform cell structure. FOAM-iT!™ 3, 4, 5, 10, 15 and 26 have a handling time of about 20 minutes and reach full cure in 2 hours.
FOAM-iT!™ 4 Black is pre-pigmented to a very deep black color.
FOAM-iT!™ 10 SLOW is a 10 lb. density foam with a long, 3.5 minute working time, taking 1 hour to reach handling strength and 4 hours to cure. FOAM-iT!™ 10 SLOW is designed for large-pour industrial, art-related and special effects applications.
FOAM-iT!™ 8 is a unique, self-skinning foam with a finer, more uniform cell structure than the other FOAM-iT!™ products.
FOAM-iT!™ 8, 15 or 26 can be cast in blocks as a machinable prototype modeling board.
All FOAM-iT!™ products can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with SO-Strong™, UVO™ or IGNITE™ colorants and are used for a variety of art/craft, industrial design and special effects applications.
|
Generic PUR, Unspecified - Mineral | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PUR, Unspecified - Mineral
This information is provided for comparative purposes only.
|
Generic PUR, Unspecified | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PUR, Unspecified
This information is provided for comparative purposes only.
|
Gravi-Tech™ GRV-UR-045-SS-W Black | 北アメリカ | |
Gravi-Tech™ GRV-UR-060-W-BLK | 北アメリカ | |
Gravi-Tech™ GRV-UR-080-W | アジア太平洋地域 | |
Gravi-Tech™ GRV-UR-110-W | アジア太平洋地域 | |
Huafon GW-100 | アジア太平洋地域 |
Grained PU Resin
Characteristics
Water grained resin.
Applications
Water grained resin
|
Huafon JF-A-2060 | アジア太平洋地域 |
Two Component General Type
Characteristics
Instant peeling resin, cured quickly and completely, clear grain, good adhesive strength, solvent resistance, swelling resistance.
Applications
Split leather
|
Huafon JF-A-2062 | アジア太平洋地域 |
Two Component General Type
Characteristics
Fast cured type PU resin, cured fastly and completely, clear grain, good adhesive strength, solvent resistance, swelling resistance.
Applications
Split leather
|
Huafon JF-A-2070 | アジア太平洋地域 |
Two Component General Type
Characteristics
Cured resin, crosslink quickly, clear grain, good adhesive strength, solvent resistance, swelling resistance. (Should be cured for 24 hours at 50-70°C)
Applications
Split leather
|
Huafon JF-A-5015 | アジア太平洋地域 |
One Component, One and a Half Component General Type
Characteristics
One and a half component type, super soft, good adhesive strength, solvent resistance, swelling resistance.
Applications
Garments, Bags
|
Huafon JF-A-5025 | アジア太平洋地域 |
One Component, One and a Half Component General Type
Characteristics
One component type, soft, good adhesive strength, solvent resistance, swelling resistance.
Applications
Garments, Shoes, Bags
|
Huafon JF-A-5030 | アジア太平洋地域 |
One Component, One and a Half Component General Type
Characteristics
One component type, soft, good adhesive strength, solvent resistance, swelling resistance.
Applications
Garments, Shoes, Bags
|
Huafon JF-A-5050 | アジア太平洋地域 |
One Component, One and a Half Component General Type
Characteristics
One component type, mid hard, good adhesive strength, solvent resistance, swelling resistance.
Applications
Shoes, Bags
|
Huafon JF-A-AH2060 | アジア太平洋地域 |
Two Component Cold Resistance Type
Characteristics
Instant peeling resin, cold resistance, hydrolysis resistance, cured fastly and completely, clear grain, good adhesive strength, solvent resistance, swelling resistance
Applications
Split Leather
|
Huafon JF-A-AH5022 | アジア太平洋地域 |
One Component, One and a Half Component Cold Resistance Type
Characteristics
One component type, soft, hydrolysis resistance, cold resistance, yellowing resistance, NOx resistance, small crease.
Applications
Micro fibre, Shoes, Bags
|
Huafon JF-A-AH5025A | アジア太平洋地域 |
One Component, One and a Half Component Cold Resistance Type
Characteristics
One component type, soft, two component effects, cold resistance, hydrolysis resistance, yellowing resistance, good adhesive strength, small crease, solvent resistance, swelling resistance.
Applications
Micro fibre, Shoes, Bags
|
Huafon JF-A-AH5030 | アジア太平洋地域 |
One Component, One and a Half Component Cold Resistance Type
Characteristics
One and a half component type, soft, cold resistance, hydrolysis resistance, good adhesive strength, small crease, solvent resistance, swelling resistance.
Applications
Micro fibre, Shoes, Bags
|
Huafon JF-A-AH5035 | アジア太平洋地域 |
One Component, One and a Half Component Cold Resistance Type
Characteristics
One component type, soft, cold resistance, hydrolysis resistance, good adhesive strength, solvent resistance, swelling resistance.
Applications
Shoes, Bags
|
Huafon JF-A-AH5038 | アジア太平洋地域 |
One Component, One and a Half Component Cold Resistance Type
Characteristics
One component type, soft, cold resistance, hydrolysis resistance, yellowing resistance, NOx resistance, good adhesive strength, solvent resistance, swelling resistance.
Applications
Shoes, Bags
|
Huafon JF-A-AH5045 | アジア太平洋地域 |
One Component, One and a Half Component Cold Resistance Type
Characteristics
One and a half component type, cold resistance, hydrolysis resistance, good adhesive strength, small crease, solvent resistance, swelling resistance.
Applications
Micro fibre, Shoes, Bags
|
Huafon JF-A-AH5055 | アジア太平洋地域 |
One Component, One and a Half Component Cold Resistance Type
Characteristics
One component type, mid hard, two component effects, cold resistance, hydrolysis resistance, yellowing resistance, good adhesive strength, small crease, solvent resistance, swelling resistance.
Applications
Micro fibre, Shoes, Bags
|
Huafon JF-A-AH7021 | アジア太平洋地域 |
Non-Yellowing Type
Characteristics
Non-yellowing type, cold resistance, hydrolysis resistance.
Applications
Micro fibre, Garments, Shoes, Bags
|
Huafon JF-A-PV5020 | アジア太平洋地域 |
Semi-PU Type
Characteristics
Special adhesive resin for semi-Pu, good adhesive strength with PVC, DOP resistance.
Applications
Semi-Pu
|
Huafon JF-A-WP1010 | アジア太平洋地域 |
High Water Pressure Resistance PU Resin for Adhesive Layer
Characteristics
High water pressure resistance, strong adhesive strength.
Applications
Tents
|
Huafon JF-A-WP1015 | アジア太平洋地域 |
High Water Pressure Resistance PU Resin for Adhesive Layer
Characteristics
High water pressure resistance, good adhesive strength and nonstick surface.
Applications
Tents
|
Huafon JF-A-WP1025 | アジア太平洋地域 |
High Water Pressure Resistance PU Resin for Adhesive Layer
Characteristics
As using in PVC or dry process coating, good adhesive strength with nylon and oxford.
Applications
Tents
|
Huafon JF-A-WV1008B | アジア太平洋地域 |
Water Proof and Water Vapor Permeability Resin for Dry-Process
Characteristics
One component type PU resin for adhesive layer, high water pressure resistance, high water vapor permeability, high adhesion.
Applications
Garments
|
Huafon JF-A-WV2010 | アジア太平洋地域 |
Water Proof and Water Vapor Permeability Resin for Dry-Process
Characteristics
Two component type PU resin for adhesive layer, high water pressure resistance, high water vapor permeability, soft hand feel, good washing fastness, high adhesion.
Applications
Garments
|
Huafon JF-A-WV7020 | アジア太平洋地域 |
Non-Yellowing Type
Characteristics
Non-yellowing type PU resin for adhesive layer, cold resistance, hydrolysis resistance, solvent resistance, swelling resistance, good water pressure resistance, good water vapor permeability, good washing fastness, strong adhesive strength, can be used together with ""JF-S-WV7030"".
Applications
Micro fibre, Garments, Shoes
|
Huafon JF-D-8603 | アジア太平洋地域 |
PU Resin for Dry-Process Surface Layer
Characteristics and Application
Smooth, soft, full of feeling, heat resistance, good abrasion resistance, nonstick surface.
|
Huafon JF-D-8605 | アジア太平洋地域 |
PU Resin for Dry-Process Surface Layer
Characteristics and Application
Mid soft, heat resistance, good abrasion resistance, good smoothness and nonstick surface.
|
Huafon JF-D-8608 | アジア太平洋地域 |
PU Resin for Dry-Process Surface Layer
Characteristics and Application
Mid hard type, heat resistance, good abrasion resistance, good smoothness and nonstick surface.
|
Huafon JF-D-C5902 | アジア太平洋地域 |
Dry Process Water-Based PU Resin for Adhesive Layer
Characteristics and Application
Soft film-forming capabilities, strong adhesive strength, excellent folding resistance in low temperature, excellent adhesive strength with PVC, NYLON and leather.
|
Huafon JF-D-C8903 | アジア太平洋地域 |
PU Resin for Dry-Process Surface Layer
Characteristics and Application
Smooth, soft, full of feeling, excellent folding resistance in low temperature, heat resistance, good swelling resistance.
|
Huafon JF-D-C8905 | アジア太平洋地域 |
PU Resin for Dry-Process Surface Layer
Characteristics and Application
Mid soft type, excellent folding resistance in low temperature, water resistance, good swelling resistance, nonstick surface.
|
Huafon JF-D-C8908 | アジア太平洋地域 |
PU Resin for Dry-Process Surface Layer
Characteristics and Application
Mid hard type, excellent folding resistance in low temperature, water resistance, good swelling resistance, nonstick surface.
|
Huafon JF-D-NC8903 | アジア太平洋地域 |
Non-Yellowing Type Water-Based PU for Surface Layer
Characteristics and Application
Non-yellowing type, smooth, soft, full of feeling, excellent folding resistance in low temperature, good swelling resistance.
|
Huafon JF-D-NC8905 | アジア太平洋地域 |
Non-Yellowing Type Water-Based PU for Surface Layer
Characteristics and Application
Non-yellowing type, soft, excellent folding resistance in low temperature, good swelling resistance, nonstick surface.
|