35 mol% Ethylene Vinyl Alcohol Copolymer

44 mol% Ethylene Vinyl Alcohol Copolymer

32 mol% Ethylene Vinyl Alcohol Copolymer

32 mol% Ethylene Vinyl Alcohol Copolymer

38 mol% Ethylene Vinyl Alcohol Copolymer

27 mol% Ethylene Vinyl Alcohol Copolymer

This data represents typical values that have been calculated from all products classified as: Generic EVOH This information is provided for comparative purposes only.

G-SoarnoL™ is a special EVOH, whose crystallinity and melting point can be controlled. G-SoarnoL™ has excellent orientability and shrinkability while keeping its excellent gas barrier property. G-SoarnoL™ GC3304B is ethylene content 33 mol% with high gas barrier property. This grade is suitable for orientation applications such as thermoformable film and shrink bag with double bubble process.

G-SoarnoL is a special EVOH, whose crystallinity and melting point can be controlled. G-SoarnoL™ has excellent orientability and shrinkability while keeping its excellent gas barrier property. G-SoarnoL™ GH3804B is ethylene content 38 mol% EVOH with excellent orientability. This grade is suitable for orientation applications, biaxial oriented film with tenter flame such as BOPP film and shrink bag with double bubble process. .

SoarnoL ™ A4412 is one of the standard grades of SoarnoL ™, its ethylene content is 44 mol% with a high MFR (melt flow rate). SoarnoL ™ A4412 has excellent water resistance and good gas barrier property, especially in high humidity environments. Its gas barrier property is not drastically lower at high humidity. This resin is primarily used in co-extruded cast film, tube and co-extrusion coating applications.

SoarnoL ™ AT4403 is one of the standard grades of SoarnoL ™, its ethylene content is 44 mol% with a low MFR (melt flow rate).SoarnoL ™ AT4403 has excellent water resistance and good gas barrier property, especially in high humidity environments. Its gas barrier property is not drastically lower at high humidity. This resin is primarily used in co-extruded blown film applications, and can also be used in shrink packaging.

SoarnoL ™ BG3522B is a 35 mol% ethylene content standard grade of SoarnoL ™ with a high melt flow rate. SoarnoL ™ BG3522B is specifically designed for co-extrusion coating applications.

SoarnoL ™ BX6304B is a special grade for thermoforming that has a wide thermoforming process window with high barrier to gases. SoarnoL ™ BX6304B is appropriate for film & sheet / thermoforming applications.

SoarnoL ™ BX6804B is a special grade for thermoforming that has a wide thermoforming process window with high barrier to gases. SoarnoL ™ BX6804B is appropriate for film & sheet / thermoforming applications.

SoarnoL™ D2908 is one of the standard grades of SoarnoL™, its ethylene content is 29 mol% with an intermediate MFR (melt flow rate). SoarnoL™ D2908 has excellent gas barrier property at normal humidity. This resin is primarily used in co-extruded cast film and co-extrusion coating applications.

SoarnoL ™ D2908HB is a special grade of SoarnoL ™, its ethylene content is 29 mol% with an intermediate MFR (melt flow rate). SoarnoL ™ D2908HB has a better thermal durability, therefore it can be used as the oxygen barrier component of the under floor heating pipe.

SoarnoL ™ DC3203FB is one of the standard grades of SoarnoL ™, its ethylene content is 32 mol% with a low MFR (melt flow rate). SoarnoL ™ DC3203FB has excellent barrier to gases, and is primarily used in co-extrusion blow-molded containers, co-extruded film and tube applications.

SoarnoL™ DC3203RB is one of the standard grades of SoarnoL™, its ethylene content is 32 mol% with a low MFR (melt flow rate). SoarnoL™ DC3203RB has excellent barrier to gases, and is primarily used in co-extrusion blow-molded containers, co-extruded film and tube applications.

SoarnoL ™ DC3205HB is a special grade of SoarnoL ™, its ethylene content is 32 mol% with an intermediate MFR (melt flow rate). SoarnoL ™ DC3205HB has a better thermal durability, therefore it can be used as the oxygen barrier component of the under floor heating pipe. .

SoarnoL ™ DC3212B is one of the standard grades of SoarnoL ™, its ethylene content is 32 mol% with a high MFR (melt flow rate). SoarnoL ™ DC3212B has excellent barrier to gases, and is primarily used in co-extrusion coating, co-extruded film and co-injection molded containers applications.

SoarnoL ™ DT2904R is a 29 mol% ethylene content standard grade of Soarno L ™ with a low MFR (melt flow rate). SoarnoL ™ DT2904R has excellent gas barrier property at low humidity, good thermal stability and is used in co-extruded film as well as co-extrusion blow-molded containers.

SoarnoL ™ ET3803RB is one of the standard grades of SoarnoL ™, its ethylene content is 38 mol% with a low MFR (melt flow rate). SoarnoL ™ ET3803RB has excellent barrier to gases. This resin is primarily used in co-extruded film applications. Furthermore, it can also be used in co-extruded sheet / thermoforming and shrink packaging.