Free Form™ AIR HT is a low density, lightweight epoxy putty that offers high temperature resistance to 300°F/149°C when cured at room temperature and 400°F/204°C when heat post cured. This is a low-odor, low shrinkage formula that is easy to use. Free Form™ AIR HT is mixed by hand with a 2A:1B by volume or weight mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. It can be sanded, shaped, drilled, tapped and CNC machined/routered.

Epoxy Laminating; Laminate Free Form™ AIR HT putty in between layers of EpoxAmite™ HT Laminating Epoxy and fiberglass cloth, carbon or other fiber for making lightweight composite parts. Eliminates the need to make multiple layers of laminating with liquid epoxy; saves time and labor.

Epoxy Tooling Applications – use as a filleting material. Also good for jig and fixture construction.

Used as a lightweight adhesive, Free Form™ AIR HT will bond to itself and a variety of surfaces including wood, stone and EpoxAcoat™ HT surface coat epoxy.

Pot Life/Working Time; this material is mass sensitive. The more material you mix at one time, the less time you have to work with it. Working tip; If mixing a large quantity, flatten putty with a rolling pin to reduce mass concentration and extend pot life.

• Thickness; 1.5 inch (3.81 cm) – pot life is 90 minutes, handling time is 3 hours, full cure in 16 hours.

• Thickness; 3/8” (0.95 cm) – pot life is 2.5 hours, handling time is 5.5 hours, full cure in 16 hours.

• Thickness; 1/8” (0.32 cm) - pot life is 3 hours; handling time is 6.5 hours, full cure in 16 hours.