Maleic Anhydride Grafted Polymer (MAH-g) by Mitsui Chemicals Europe GmbH
Produto | Disponibilidade | Descrição do produto |
---|---|---|
ADMER™ AT1179E | África & Oriente Médio |
ADMER® AT1179E is a maleic anhydride grafted PP-based adhesive especially designed for bi-oriented PP-structures with EVOH or PA.
|
ADMER™ AT1404E | África & Oriente Médio |
ADMER® AT1404E is an maleic anhydride grafted, co-PP based tie resin, suitable for high performance coating and extrusion applications such a pipes and injection molding. It offers strong adhesion to PA, EVOH and Aluminum.
|
ADMER™ AT1707E | África & Oriente Médio |
ADMER® AT1707E is an maleic anhydride grafted tie resin based on PE-LLD for multilayer high-speed PE-cast film and structures with PA, EVOH or Aluminum.
|
ADMER™ AT1870E | África & Oriente Médio |
ADMER™ AT1870E is a MDPE-based adhesive resin designed for injection molding processing. It offers advanced adhesion durability and good processability for PE and PA.
|
ADMER™ AT1955E | África & Oriente Médio |
ADMER™ AT1955E is a maleic anhydride grafted, elastomer-based adhesive designed for cast, sheet and blown film, blow molding, double- and triple-bubble-process. This grade shows high bonding not only to PET, but also to EVOH, PA, PE and PP.
|
ADMER™ AT2138E | África & Oriente Médio |
ADMER® AT2138E is an maleic anhydride grafted, PE- based adhesive designed for doubIe- and tripIe- bubble process. It shows high adhesion to PE, PA, EVOH and PET.
|
ADMER™ AT2235E | África & Oriente Médio |
ADMER® AT2235E is a maleic anhydride grafted concentrate grade based on PE-LLD. Used with a sufficient blending ratio, it offers strong adhesion performance in film applications between PE and PA or EVOH and also in Wood Plastic Composites.
|
ADMER™ AT2397E | África & Oriente Médio |
ADMER™ AT2397E is designed for multilayer pipes composed of polyethylene (PEx, PE-RT) and aluminum. It offers advanced adhesion durability, high heat resistance and good processability for PE and PA.
|
ADMER™ AT2490E | África & Oriente Médio |
ADMER™ AT2490E is a maleic anhydride grafted grade based on PE-LLD. It is dedicated to be used as a coupling agent. Added to base polymer it improves the mechanical properties of flame-retarded wire & cable compounds, glass fiber compound and especially wood plastic compounds (WPC).
|
ADMER™ AT2539E | África & Oriente Médio |
ADMER® AT2539E is a maleic anhydride grafted MD-PE based adhesive designed for bonding to PE, EVOH, PA, Epoxy and metals. It offers advanced adhesion durability, high heat resistance and good processability in pipe coating, blow film and blow molding.
|
ADMER™ AT2614E | África & Oriente Médio |
ADMER™ AT2614E is a maleic anhydride grafted PE- based adhesive designed for double- and triple- bubble process. It shows high adhesion to PE, PA, EVOH, PP, PC and PET.
|
ADMER™ AT2717E | África & Oriente Médio |
ADMER® AT2717E is a maleic anhydride grafted, PP-based grade with high bonding to PP, EVOH and PA, especially designed for blown and cast film structures with antifog additives*.
*materiaI was tested with Constab AF0042PP antifog grade.
|
ADMER™ AT2747E | África & Oriente Médio |
ADMER™ AT2747E is a maleic anhydride grafted PP based adhesive for 3-layer steel pipe coating. It is designed for strong bonding between PP and epoxy materials.
|
ADMER™ AT2749E | África & Oriente Médio |
ADMER™ AT2749E is a maleic anhydride grafted MDPE based adhesive for 3-layer steel pipe coating. It is designed for strong bonding between PE and epoxy materials.
|
ADMER™ AT2831E | África & Oriente Médio |
ADMER™ AT2831E is a PE-based adhesive for 3-layer steel pipe coating with a strong adhesion between PE and epoxy materials.
|
ADMER™ AT2867E | África & Oriente Médio |
ADMER™ AT2867E is a maleic anhydride grafted, PP-based adhesive designed for bonding between polypropylene and EVOH or PA. It offers advanced viscoelasticity and is especially designed for triple bubble processes.
|
ADMER™ AT2937 | África & Oriente Médio |
ADMER™ AT2937 is an Imine modified Polypropylene-based adhesive resin. It offers bonding to PP, PA and POK.
|
ADMER™ AT3158E | África & Oriente Médio |
ADMER™ AT3158E is a PE-based adhesive for 3-layer steel pipe coating with a strong adhesion between PE and epoxy materials.
|
ADMER™ AT3177E | África & Oriente Médio |
ADMER™ AT3177E is a maleic anhydride grafted PP-based adhesive especially designed for vacuum metallized cast PP and oriented PP (VM-CPP & VM-BOPP). It offers enhanced bonding to metallization layers while maintaining a high surface gloss.
|
ADMER™ GT6E | África & Oriente Médio |
ADMER® GT6E is a maleic anhydride grafted, LLDPE-based adhesive designed for multilayer plastic fuel tanks (PFT) composed of PE, PA and EVOH. It offers advanced adhesion durability, fuel resistance and processability.
|
ADMER™ GT7 | África & Oriente Médio |
ADMER® GT7 is a maleic anhydride grafted, LLDPE-based adhesive designed for multilayer plastic fuel tanks (PFT) composed of PE, PA and EVOH. It offers advanced adhesion durability, fuel resistance and processability.
|
ADMER™ L2100 | África & Oriente Médio |
ADMER® L2100 is a maleic anhydride grafted LLDPE-based resin, designed for blow molding PE-applications with EVOH or PA. It offers advanced adhesion durability and good processability.
|
ADMER™ NE062E | África & Oriente Médio |
ADMER® NE062E is an maleic anhydride grafted, PE-based adhesive designed for multilayer plastic pipes composed of PE, PEX, PE-RT and Aluminum. It offers advanced adhesion durability, high heat resistance and good processabiIity.
|
ADMER™ NF358E | África & Oriente Médio |
ADMER™ NF358E is a maleic anhydride grafted, PE-LLD-based tie resin developed for multilayer film applications composed of PE, PA, EVOH or Aluminum. This grade can be blended with PE-LD, PE-LLD, PE-HD and EVA. Its superior adhesion performance and high transparency makes it the perfect choice for multilayer barrier films. Incorporating our advanced anhydride grafting technology, this grade has very low unreacted acid content, while maintaining the equivalent thermal stability of ordinary PE-LLD. The adhesion strength of NF358E can be adjusted by changing of the blend ratio in the range of 20% to 40%.
|
ADMER™ NF377E | África & Oriente Médio |
ADMER® NF377E is an maleic anhydride grafted, PE-LLD-based adhesive designed for PE-cast film structures with PA and EVOH.
|
ADMER™ NF408E | África & Oriente Médio |
ADMER® NF408E is a maleic anhydride grafted, PE-based adhesive resin designed for adhesion to PA or EVOH in bottle, sheet and blow film applications.
|
ADMER™ NF410E | África & Oriente Médio |
ADMER® NF410E is a maleic anhydride grafted, PE-LLD-based adhesive resin designed for multilayer pipes composed of PE, PEX or PE-RT with EVOH, PA or Aluminum. It offers advanced adhesion durability and good processability.
|
ADMER™ NF448E | África & Oriente Médio |
ADMER® NF448E is a maleic anhydride grafted, LLDPE-based tie resin designed for blow molding applications (Bottle, IBC) composed of PE and EVOH or PA.
|
ADMER™ NF468E | África & Oriente Médio |
ADMER® NF468E is a maleic anhydride grafted, PE-LLD-based tie resin, designed for multilayer pipes composed of PE, PEX or PE-RT with EVOH, PA or Aluminum. It offers advanced adhesion durability and good processability.
|
ADMER™ NF478E | África & Oriente Médio |
ADMER® NF478E is a maleic anhydride grafted LLDPE-based grade, designed for adhesion to Polyamide in blown and cast film applications.
|
ADMER™ NF498E | África & Oriente Médio |
ADMER® NF498E is an maleic anhydride grafted LLDPE-based grade, which is designed for adhesion to Polyamide or EVOH in tubes, sheet, blown and cast film application.
|
ADMER™ NF518E | África & Oriente Médio |
ADMER® NF518E is a maleic anhydride grafted, LLDPE-based grade, which is designed for adhesion between PE and PA or EVOH in tube, sheet, blown and cast film and especially double-bubble applications.
|
ADMER™ NF528E | África & Oriente Médio |
ADMER® NF528E is a maleic anhydride grafted PE-based grade, which is designed for adhesion between PE and PA or EVOH in blown and cast film and especially double-bubble applications.
|
ADMER™ NF530E | África & Oriente Médio |
ADMER™ NF530E is a maleic anhydride grafted LLDPE based adhesive designed as well for multilayer pipe composed of PE, PE-x, PE-RT and Aluminum as for PE-cast film and sheet with Polyamide or EVOH.
|
ADMER™ NF642E | África & Oriente Médio |
ADMER™ NF642E is a maleic anhydride grafted, LLDPE-based adhesive concentrate. Used with a sufficient blending ratio, it offers strong adhesion performance between PE and PA or EVOH in multilayer blown & cast film, sheets and bottle applications.
|
ADMER™ NF837E | África & Oriente Médio |
ADMER® NF837E is a maleic anhydride grafted, PE-LLD-based grade, which is especially designed for high-speed extrusion coating application. lt offers strong adhesion to EVOH, PA, Paper and Aluminum.
|
ADMER™ NF911E | África & Oriente Médio |
ADMER® NF911E is a maleic anhydride grafted, Plastomer-based grade, designed for adhesion to PET, PP, EVOH, PA and PE in high performance processes such as cast and blown film, doubIe- and tripIe- bubble applications.
|
ADMER™ NF927E | África & Oriente Médio |
ADMER™ NF927E is a maleic anhydride grafted PE- based adhesive designed for double- and triple- bubble process. It shows high adhesion to PE, PA, EVOH, PP, PC and PET.
|
ADMER™ QB510E | África & Oriente Médio |
ADMER® QB510E is a maleic anhydride grafted, homo-PP based standard adhesive for bottles, sheets and films composed of Polypropylene and EVOH or PA.
|
ADMER™ QB520E | África & Oriente Médio |
ADMER® QB520E is a maleic anhydride grafted, homo-PP based adhesive resin with a lower MFR for bottles, sheets, blown film and pipes composed of PP with EVOH or PA.
|