Acetal: Copolímero (POM) Acetal
Produto | Disponibilidade | Descrição do produto |
---|---|---|
Hostaform® C 9021 GV3/10 | África & Oriente Médio |
Injection molding grade; reinforced with ca. 10 % glass spheres
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNR, 03-002, GB10 POM copolymer Injection molding type, reinforced with ca. 10 % glass spheres; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 0.81 mm, in black and a thickness more than 1.5 mm, as UL94 HB, temperature index UL 746 B for a thickness of 2 mm, electrical 105 °C, mechanical 95 °C (tensile impact) and 100 °C (tensile). Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: for low-warpage molded parts with higher rigidity and hardness. FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA)
|
Hostaform® C 9021 GV3/20 | África & Oriente Médio |
Injection molding grade; reinforced with ca. 20 % glass spheres
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNR, 03-002, GB20 POM copolymer Injection molding type, reinforced with ca. 20 % glass spheres; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 0.81 mm, in black and a thickness more than 1.5 mm as UL94 HB, temperature index UL 746 B for a thickness of 3 mm, electrical 105 °C, mechanical 95 °C (tensile impact) and 100 °C (tensile). Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For low-warpage molded parts with higher rigidity and hardness. FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA)
|
Hostaform® C 9021 GV3/30 TF2 | África & Oriente Médio |
Glass bead + PTFE
Injection molding grade with 30% glass beads, for low warpage parts, slip modified with PTFE
|
Hostaform® C 9021 GV3/30 | África & Oriente Médio |
Injection molding grade; reinforced with ca. 30 % glass spheres
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNR, 02-002, GB30 POM copolymer Injection molding type, reinforced with ca. 30 % glass spheres; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 0.81 mm, in black and a thickness more than 1.0 mm as UL94 HB, temperature index UL 746 B for a thickness of 1.57 mm, electrical 105 °C, mechanical 95 °C (tensile impact) and 100 °C (tensile). Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For low-warpage and dimensionally stable molded parts with higher rigidity and hardness. FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA)
|
Hostaform® C 9021 K | África & Oriente Médio |
Injection molding type like C 9021; with special chalk modified
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNR, 03-002, K5 POM copolymer Injection molding type, with special chalk modified; good wear properties; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB, temperature index UL 746 B electrical 105 °C, mechanical 90 °C (tensile impact) and 80 °C (tensile). Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: for unlubricated or once-only-lubricant sliding Parts. FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA)
|
Hostaform® C 9021 LS 10/1570 | África & Oriente Médio |
General purpose injection molding grade; UV-stabilized with UV stabilizers and carbon black
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GCL, 03-002 POM copolymer Standard Injection molding type, UV-stabilized with UV-stabilizers and carbon black; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: exterior applications. FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 LS | África & Oriente Médio |
UV resistant
POM copolymer Standard Injection molding type, UV-stabilized with UV-stabilizers.; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 M XAP®2 | África & Oriente Médio |
with molybdenum disulphide modified, low emission
POM copolymer Injection molding type, modified with molybdenum disulphide; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For sliding combinations with high surface pressure and low sliding speed, only slight tendency to stick-slip. Preliminary Datasheet
|
Hostaform® C 9021 M | África & Oriente Médio |
Injection molding type like C 9021; with molybdenum disulphide modified
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNS, 03-002 POM copolymer Injection molding type, modified with molybdenum disulphide; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB, temperature index UL 746 B electrical 105 °C, mechanical 90 °C (tensile impact) and 80 °C (tensile). Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For sliding combinations with high surface pressure and low sliding speed, only slight tendency to stick-slip. UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 MD | África & Oriente Médio |
Metal Detectable POM
Hostaform® C 9021 MD is a special modified acetal copolymer based on Hostaform® C 9021 for parts which should be identified by metal detectors. Preliminary Datasheet
|
Hostaform® C 9021 S OEK | África & Oriente Médio |
Silicon Oil Concentrate
Hostaform® C 9021 S OEK is a ~20% loaded silicone concentrate based in acetal copolymer. It can be used in conjunction with other Celcon® and Hostaform® acetal copolymer products to reduce friction and improve wear performance. It is not meant to be used as a stand alone product. Please also see Celcon® LW90-SC for another silicone concentrate.
|
Hostaform® C 9021 S1 | África & Oriente Médio |
POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness; good chemical resistance. With tribological modification for demanding applications that require prevention of audible noise caused by stick-slip phenomenon. Â Available in natural and colored. Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 Burning rate ISO 3795 and FMVSS 302 < 100mm/min for a thickness more than 1 mm. Ranges of applications: precision engineering, electric and electronical industry, domestic appliances. FDA = Food and Drug Administration (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 SW XAP®2 LS | África & Oriente Médio |
Tribological; Low Emission
Chemical abbreviation according to ISO 1043-1: POM-KD10 Molding compound ISO 29988-POM-K,KD10,GLNRS2,3-2 POM copolymer Injection molding type, special modified with anti-friction additives for prevention of squeaking noise; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Ranges of applications: For sliding combinations with low wear and low coefficient of friction, prevents squeaking noise. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1,5 mm. Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg Preliminary Datasheet
|
Hostaform® C 9021 SW | África & Oriente Médio |
Injection molding type like C 9021; special modified with anti-friction additives for prevention of squeaking noise
Chemical abbreviation according to ISO 1043-1: POM-KD10 Molding compound ISO 29988-POM-K,KD10,GNRS2,3-2 POM copolymer Injection molding type, special modified with anti-friction additives for prevention of squeaking noise; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. UL-registration in natural and black and a thickness more than 1.5 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1,5 mm. Ranges of applications: For sliding combinations with low wear and low coefficient of friction, prevents squeaking noise. UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 TF XAP®2 | África & Oriente Médio |
Tribological; low Emission
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNS, 2-2 POM copolymer Injection molding type, modified with PTFE; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation; for sliding combinations with very low coefficient of friction. Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For sliding combinations with very low coefficient of friction. FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 TF | África & Oriente Médio |
Injection molding type like C 9021; with PTFE modified
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNS, 02-002 POM copolymer Injection molding type, modified with PTFE; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation; for sliding combinations with very low coefficient of friction. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB, temperature index UL 746 B electrical 105 °C, mechanical 95 °C (tensile impact) and 100 °C (tensile). Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For sliding combinations with very low coefficient of friction. FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA)
|
Hostaform® C 9021 TF5 | África & Oriente Médio |
Injection molding type like C 9021, with PTFE modified
Hostaform® C 9021 TF5 is a standard flow low level polytetraflouroethylene filled (PTFE) product designed for use in wear applications against plastics, metal, glass or ceramic mating surfaces where silicone lubricants can not be tolerated.
|
Hostaform® C 9021 XAP C | África & Oriente Médio |
POM for Consumers and Cosmetics. Low Emissions, low Extractables, FDA approval
POM copolymer Medium flow injection molding grade with very low emissions and migrations; designed for consumer packaging. Emission according to VDA 275 < 2 mg/kg (natural grades), VDA 275 < 5 mg/kg (colors), Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 FDA = Food and Drug Administration (USA)
|
Hostaform® C 9021 XAP LS colored | África & Oriente Médio |
Low Emission UV resistant
POM copolymer Product with reduced emissions especially for automotive interior application. Good properties of the standard-injection molding grades like high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation are maintained Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. VDA 275 Emissions < 10 ppm Ranges of applications: automotive engineering, FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 XAP® ECO-B | África & Oriente Médio |
Low Emission
POM copolymer Product with reduced emissions especially for automotive interior application. Good properties of the standard-injection molding grades like high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation are maintained Emission according to VDA 275 < 10 mg/kg (natural grades) Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. FDA = Food and Drug Administration (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA) ECO-B: Hostaform® ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.
|
Hostaform® C 9021 XAP® | África & Oriente Médio |
Low Emission
POM copolymer Product with reduced emissions especially for automotive interior application. Good properties of the standard-injection molding grades like high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation are maintained Emission according to VDA 275 < 10 mg/kg (natural grades) Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. FDA = Food and Drug Administration (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
|
Hostaform® C 9021 XAP®2 ECO-B | África & Oriente Médio |
POM copolymer Standard injection molding grade with reduced emissions especially for automotive interior application. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Emission according to VDA 275 < 2 mg/kg (natural grades) Emission according to VDA 275 < 5 mg/kg (colored grades) ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.
|
Hostaform® C 9021 XAP®2 LS | África & Oriente Médio |
UV resistant, Low Emission
POM copolymer Standard injection molding grade with reduced emissions especially for automotive interior application. With UV Additives, colored Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Emission according to VDA 275 < 2 mg/kg (natural grades) Emission according to VDA 275 < 5 mg/kg (colored grades)
|
Hostaform® C 9021 XAP®2 | África & Oriente Médio |
Low Emission
POM copolymer Standard injection molding grade with reduced emissions especially for automotive interior application. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Emission according to VDA 275 < 2 mg/kg (natural grades) Emission according to VDA 275 < 5 mg/kg (colored grades)
|
Hostaform® C 9021 XLE | África & Oriente Médio |
POM copolymer Standard injection molding grade with reduced emissions especially for automotive interior application. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Emission according to VDA 275 < 1 mg/kg.
|
Hostaform® C 9021 | África & Oriente Médio |
General purpose injection molding grade
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 UL-registration for all colours and a thickness more than 1.5 mm as UL 94 HB, temperature index UL 746 B electrical 110 °C, mechanical 90 °C. Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances. FDA = Food and Drug Administration (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA)
|
Hostaform® CP15X | África & Oriente Médio |
creep resistant, high viscosity acetal copolymer
Preliminary Data Sheet Hostaform® acetal copolymer grade CP15X is a creep resistant, high viscosity polymer providing excellent performance in general purpose injection molding. This grade provides overall excellent performance in applications requiring high stiffness over time.
|
Hostaform® EC140CF10 | África & Oriente Médio |
10% carbon fiber, electrostatic dissipative grade
Hostaform® acetal copolymer grade EC140CF10 is a 10% carbon fiber reinforced grade for increase strength, stiffness and electrical conductivity. Preliminary Data Sheet
|
Hostaform® EC140XF | África & Oriente Médio |
electrostatic dissipative, fuel resistant including hot diesel
Hostaform® EC140XF is a conductive ESD grade of acetal copolymer for applications requiring dissipation of static build-up. Hostaform® EC140XF has an improved resistance to aggressive fuel blends.
|
Hostaform® EC141SXF 10/9022 | África & Oriente Médio |
Electroconductive fuel resistant
Hostaform® acetal copolymer grade EC141SXF 10/9022 is a conductive grade modified to resist deterioration from aggressive fuel blends. Hostaform® EC141SXF 10/9022 has been developed to dissipate static electricity from fuel handling systems. Hostaform® EC141SXF 10/9022 has been specially formulated for laser welding applications. Please note Hostaform® EC141SXF 10/9022 has special processing considerations to ensure static dissipation properties. Use minimum back pressure and slowest screw speed possible in retracting screw during cooling portion of cycle. Large gate size (>2 mm) recommended. Pneumatic conveying of material long distances is not recommended.
|
Hostaform® EC270TX | África & Oriente Médio |
Electroconductive, impact modified
|
Hostaform® FK 1:25 | África & Oriente Médio |
acetal color masterbatch/concentrate
Hostaform® FK color masterbatches (color concentrates) are for use with other acetal products based in Celanese's acetal copolymer. Hostaform® FK color masterbatches are specially designed to provided color to other Celcon® and Hostaform® grades with minimal affect on performance properties. It is not meant to be molded as a stand alone product. FDA compliant Hostaform® FK color masterbatches are available in specific colors. Please contact Celanese for details.
|
Hostaform® FK 2:25 | África & Oriente Médio |
acetal color masterbatch/concentrate
Hostaform® FK color masterbatches (color concentrates) are for use with other acetal products based in Celanese's acetal copolymer. Hostaform® FK color masterbatches are specially designed to provided color to other Celcon® and Hostaform® grades with minimal affect on performance properties. It is not meant to be molded as a stand alone product. FDA compliant Hostaform® FK color masterbatches are available in specific colors. Please contact Celanese for details.
|
Hostaform® LM140LG | África & Oriente Médio |
laser markable, low gloss, good flow
Hostaform® acetal copolymer grade LM140LG is a laser markable specialty grade of acetal copolymer formulated to provide good flow with a low gloss finish. Preliminary Data Sheet
|
Hostaform® LM270Z XAP®2 | África & Oriente Médio |
Laser markable polyacetalcopolymer easy flow injection molding grade with reduced emissions especially for automotive interior application. With Improved UV resistance. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness). Emission according to VDA 275 < 5 mg/kg. Â Preliminary Datasheet
|
Hostaform® LM90 | África & Oriente Médio |
Laser markable, standard grade
Hostaform® LM90 is a nominal 9 melt flow rate acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform® LM90 can be laser marked with barcodes, identification numbers, designs, 2-D symbology, etc.
|
Hostaform® LU-02XAP® | África & Oriente Médio |
reduced gloss, low emission, UV resistant grade
Hostaform® acetal copolymer grade LU-02 XAP® is UV stabilized material displaying a reduced gloss over standard UV acetal grades similar to LU-02. However, Hostaform® LU-02XAP® has lower volatile emissions as required for some automotive interiors.
|
Hostaform® LW15EWX | África & Oriente Médio |
slip improved M15HP
Hostaform® LW15EWX is a specialty low wear grade of acetal copolymer designed for improved performance including when paired against other thermoplastic resins (PBT, PA, PC, PMMA) or steel. Due to the special wax blend the material has a good weld line strength. Compared to Hostaform® LW90EWX, this grade has higher toughness and strength.
|
Hostaform® LW90BSX | África & Oriente Médio |
low wear, including for POM/POM pairings, contains silicone oil
Hostaform® LW90BSX is a specialty low wear grade of acetal copolymer designed for a wide range of tribological applications, including POM/POM pairings. This grade's low wear system includes silicone oil.
|
Hostaform® LW90EWX | África & Oriente Médio |
low wear grade for wear against other thermoplastics
Hostaform® LW90EWX is a specialty low wear grade of acetal copolymer designed for improved performance including when paired against other thermoplastic resins (PBT, PA, PC, PMMA) or steel. Due to the special wax blend the material has a good weld line strength.
|