Prospector

Polyamide (Nylon): Nylon 66+Nylon 6I/6T

Produto Disponibilidade Descrição do produto
AKROLOY® PA M 40 black (6541) África & Oriente Médio
AKROLOY® PA M 40 black (6541) is a 40% mineral-filled, semi-aromatic polyamide blend with very good surface and slight tendency to warp even in conditioned state. AKROLOY® PA is very well suited for dimensionally accurate control elements and electronic components with optimum surface properties.
AKROLOY® PA M 40 natural (2972) África & Oriente Médio
AKROLOY® PA M 40 natural (2972) is a 40% mineral-filled, semi-aromatic polyamide blend with very good surface and slight tendency to warp even in conditioned state. AKROLOY PA reflex very grad for dimensionally accurate control elements and electronic components with optimum surface properties.
Creamid® A2H7G12.2S*9207/2 África & Oriente Médio  
Creamid® A2H7GX10.2S*9207/2 África & Oriente Médio  
Creamid® A3H2G10.2S*9001 América do Norte  
Creamid® A3H2G10.2S África & Oriente Médio
Creamid® A3H2G10.2S is a high flow, 50% glass fiber reinforced semi-aromatic polyamide (PA) designed for injection molding; primarily in metal replacement. This material provides an excellent surface finish, retains properties after moisture absorption, and is available globally.
Creamid® A3H2G12.2S África & Oriente Médio
Creamid® A3H2G12.2S is a high flow, 60% glass fiber reinforced semi-aromatic polyamide (PA) designed for injection molding; primarily in metal replacement. This material provides an excellent surface finish, retains properties after moisture absorption, and is available globally.
Creamid® A3H2G8.2FRS*9200 África & Oriente Médio  
Creamid® A3H2G8.2S*9001 África & Oriente Médio  
Creamid® A3H7G10.2S*9217 América do Norte  
Creamid® A3H7G12.0S.1*9000 América do Norte  
Creamid® A3H7G12.2S*9217 África & Oriente Médio  
Creamid® A3H7G4.2S*9217 América do Norte  
Creamid® A3H7G6.2S*9217 América do Norte  
Creamid® A3H7G8.2S*9217 América do Norte
Creamid® A3H7G8.2S is a high flow, 40% glass fiber reinforced semi-aromatic polyamide (PA) designed for injection molding; primarily in metal replacement. This material provides an excellent surface finish, retains properties after moisture absorption, and is available globally.
Edgetek™ PA-50GF/000 BK004 Ásia/Pacífico
Glass Fiber Reinforced PPA Compound.
Generic Nylon 66+Nylon 6I/6T - Glass Fiber África & Oriente Médio
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66+Nylon 6I/6T - Glass Fiber This information is provided for comparative purposes only.
Generic Nylon 66+Nylon 6I/6T África & Oriente Médio
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66+Nylon 6I/6T This information is provided for comparative purposes only.
InStruc® PA66PA6IGF40 África & Oriente Médio
40% GLASS FIBER REINFORCED, NYLON 6/6 + NYLON 6I/6T
InStruc® PA66PA6IGF40HS África & Oriente Médio
40% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 6/6 + NYLON 6I/6T
InStruc® PA66PA6IGF50HS África & Oriente Médio
50% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 6/6 + NYLON 6I/6T
InStruc® PA66PA6IGF60 África & Oriente Médio
60% GLASS FIBER REINFORCED NYLON 6/6 + NYLON 6I/6T
InStruc® PA66PA6IGF60HS África & Oriente Médio
60% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 6/6 + NYLON 6I/6T
SCHULAMID® XM GF 35 BLACK Europa
35% glassfiber reinforced semi-aromatic Polyamide Compound with excellent rigity and strength, also if conditioned.
SCHULAMID® XM GF 50 BLACK Europa
50% glassfiber reinforced semi-aromatic Polyamide Compound with excellent rigity and strength, also if conditioned. Able for Substitution Die Cast Metal.
TEREZ GT3 300 H G30 TF15 Europa
PA66 blend with panially aromatic content, 30% glass fiber reinforcement and PTFE modifcation. For molded pans with high demands on strength and tribology.
TEREZ GT3 300 H G30 W Europa
PA66 blend with partially aromatic content, 30% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater. For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
TEREZ GT3 300 H G40 W Europa
PA66 blend with partially aromatic content, 40% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater. For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
TEREZ GT3 300 H G50 W Europa
PA66 blend with partially aromatic content, 50% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater. For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
TEREZ GT3 300 H G60 W Europa
PA66 blend with panially aromatic content, 60% glass fibre reinforcement and heat stabilization. This Product is suitable for drinking water contact / coldwater. For all kind of injection moulding parts with high requirements to stiffness which a drinking water approval is needed.
TEREZ GT3S 300 H G30 Europa
PA66 blend with partially aromatic content, 30% glass fibre reinforced, heat stabilization as well as reduced density. For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
TEREZ GT3S 300 H G40 Europa
PA66 blend with partially aromatic content, 40% glass fibre reinforced, heat stabilization as well as reduced density. For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
TEREZ GT3S 300 H G50 Europa
PA66 blend with partially aromatic content, 50% glass fibre reinforced, heat stabilization as well as reduced density. For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
TEREZ GT3S 300 H G60 Europa
PA66 blend with partially aromatic content, 60% glass fibre reinforced, heat stabilization as well as reduced density. For all kind of injection moulding parts with high requirements to stiffness with a density advantage.
TEREZ GT3X 300 H G30 TF15 Europa
Partially aromatic PA66 blend with 30% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics. For injection-moulded components with high requirements to isotropic strength properties.
TEREZ GT3X 300 H G40 Europa
Partially aromatic PA66 blend with 40% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics. For injection-moulded components with high requirements to isotropic strength properties.
TEREZ GT3X 300 H G50 Europa
Partially aromatic PA66 blend with 50% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics. For injection-moulded components with high requirements to isotropic strength properties.
TEREZ GT3X 300 H G60 Europa
Partially aromatic PA66 blend with 60% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics. For injection-moulded components with high requirements to isotropic strength properties.