DGDK-6924 NT EXP1 is a high density polyethylene compound designed for use in physical foaming processes where high expansion rates (40 - 70%) are required. This compound is designed to offer excellent high speed processability as given by low extrusion pressures and smooth insulation surface quality. Furthermore, since it is fully pre-compounded with all the necessary ingredients, DGDK-6924 NT EXP1 offers better dispersion of the nucleating agent allowing high expansion rates to be achieved with more consistent processability (capacitance and diameter). It is stabilized for long term cable performance in data cable applications. Applications: Typical applications include LAN and data center cables. Specifications DGDK-6924 NT EXP1 should meet the following material specifications: - ASTM D 1248 Class A, Type III, Category 3 - ISO 1875-PE, KGHN, 45-D-045

DGDL-3479 BK is a High Density Polyethylene compound produced from resin made by the UNIPOL™ process technology. DGDL-3479 BK is a prime quality telephone and power cable black jacketing that provides good toughness, excellent stress-cracking resistance, and abrasion resistance. Specifications DGDL-3479 BK meets the following raw material specifications: - ASTM D-1248: Type III, Class C, Category 5, Grades E10 and J4, J5 Cable jacketed with DGDL-3479 BK, using sound commercial extrusion practices, should meet the following specifications: - ICEA: S-61-402; NEMA WC5 - ANSI: C8.35 - IEC 60502

Dow Electrical and Telecommunications DGDL-3479 NT is a High Density Polyethylene compound produced from resin made by the UNIPOL™ process technology. Dow Electrical and Telecommunications DGDL-3479 NT is a prime quality telephone and power cable natural jacketing that provides good toughness, excellent stress-cracking resistance, and abrasion resistance. Specifications Dow Electrical and Telecommunications DGDL-3479 NT meets the following raw material specifications: - ASTM D-1248: Type III, Class A, Category 5, Grades E10 and J4, J5 Cable jacketed with Dow Electrical and Telecommunications DGDL-3479 NT, using sound commercial extrusion practices, should meet the following specifications: - ICEA: S-61-402; NEMA WC5 - ANSI: C8.35 - IEC 60502

- Usado em Embalagens Industriais, de Alimentos e Especiais - Melhores propriedades ópticas e processabilidade - Bom desempenho de selagem - Esta resina contém aditivos deslizantes e antibloqueio - Atende às regulamentações U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consulte as regulamentações para obter mais detalhes.

Polyethylene Resin 1210P is a butene Linear Low Density Polyethylene for general blown extrusion film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability - Good sealing performance Complies with: - U.S. FDA 21 177.1520 (c) 3.2a . - EU. No 10/2011 - Consult the regulations for complete details.

- Usado em Embalagens Industriais e de Alimentos - Melhores propriedades ópticas e processabilidade - Bom desempenho de selagem - Atende às regulamentações U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consulte as regulamentações para obter mais detalhes.

Polyethylene 1211P is a butene Linear Low Density Polyethylene for general blown film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability - Good sealing performance Complies with: - U.S. FDA 21 177.1520 (c) 3.2a - EU. No 10/2011 - Consult the regulations for complete details.

- Usado em Embalagens Industriais, de Alimentos e Especiais - Melhores propriedades ópticas e processabilidade - Bom desempenho de selagem - Esta resina contém aditivos deslizantes e antibloqueio - Atende às regulamentações U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consulte as regulamentações para obter mais detalhes.

Polyethylene 1220P is a butene Linear Low Density Polyethylene for general blown film extrusion film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability Complies with: - U.S. FDA 21 177.1520 (c) 3.2a - EU. No 10/2011 - Consult the regulations for complete details.

Usado em Embalagens Industriais e de Alimentos - Melhores propriedades ópticas e processabilidade Atende à: - U.S. FDA 21 177.1520 (c) 3.2a. - EU, No 10/2011 Consulte as regulamentações para obter mais detalhes.

Polyethylene Resin 1221P is a butene Linear Low Density Polyethylene for general cast extrusion film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability Complies with: - U.S. FDA 21 177.1520 (c) 3.2a . - EU. No 10/2011 - Consult the regulations for complete details.

Composto de Revestimentos Semicondutores O DHDA-7708 BK é um composto semicondutor termoplástico projetado especificamente para o revestimento de cabos de média, alta e altíssima tensão. Combina as excelentes propriedades físicas e a baixa transmissão de umidade que são associadas normalmente com os materiais de revestimento isolante da Dow, com a condutividade dos compostos termoplásticos semicondutores para blindagem isolante. Nas aplicações de cabos de média tensão, um revestimento semicondutor proporciona durabilidade do cabo e prolonga a vida útil do cabo pela redução da tensão de impulso neutro-à-terra. O revestimento semicondutor permite a análise diagnóstica na bobina nas aplicações de alta e altíssima tensão. Em comparação com materiais termoplásticos convencionais, o DHDA-7708 BK oferece: - Melhor resistência ao stress cracking ambiental (ESCR) - Melhores propriedades em baixas temperaturas - Melhores propriedades termomecânicas - Adesão reduzida aos revestimentos isoladores delamináveis - Resistência melhorada ao cut-through e à abrasão - Reduzida transmissão de vapor de umidade Veja detalhes na Tabela 1 e nas Figuras 1 a 3 (na próxima página) Especificações Os cabos revestidos com DHDA-7708 BK e preparados utilizando sólidas práticas comerciais de fabricação, atendem às seguintes especificações: - AEIC: CS8, CS9 - ICEA: S-94-649 Type 1, S-108-720 Type 1 - IEC: 60502, 60840, 62067

DOW HFDA-0100 BK is a specially formulated semiconductive, vulcanizable compound designed for conductor shield and bonded insulation shield applications in medium voltage crosslinked polyethylene insulated cables.(1) DOW HFDA-0100 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper and aluminum conductors. Specifications: DOW HFDA-0100 BK is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW HFDA-0100 BK, prepared using sound commercial fabrication practice, meets the following specifications: - IEC 60502-02 - BS 7870-4.10 (1) DOW HFDA-0100 BK EXP3 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compounds. For other polymer insulation such as EPR and EPDM's, the user is cautioned to establish the utility of DOW HFDA-0100 BK with each formulation.

DOW ENDURANCE™ HFDB-0801 BK EC is a vulcanizable semiconductive compound based on a polyethylene copolymer and is designed for conductor shield and bonded insulation shield applications in crosslinked polyethylene insulated medium and high voltage cables.(1) DOW ENDURANCE™ HFDB-0801 BK EC has improved processability and demonstrated compatibility with copper and aluminum conductors. DOW ENDURANCE™ HFDB-0801 BK EC was specifically developed utilizing a special acetylene carbon black to provide a super-smooth surface yielding a more perfect interface between the extruded shield and the insulation. As a result, significantly improved cable performance can be expected. DOW ENDURANCE™ HFDB-0801 BK EC is formulated with a higher temperature peroxide. Thus, DOW ENDURANCE™ HFDB-0801 BK EC is less subject to pre-cure or scorch within the processing extruder and die. Specifications DOW ENDURANCE™ HFDB-0801 BK EC is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW ENDURANCE™ HFDB-0801 BK EC, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - AEIC: CS7, CS8 - IEC: 60502, 60840, 62067 - ICEA: S-108-720, S-94-649; S-97-682; S-93-639 (NEMA WC 74), - DIN: VDE 0273

DOW ENDURANCE™ HFDB-4201 EHV is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound of extreme cleanliness developed especially for the insulation of power cables that employ high electrical stresses. DOW ENDURANCE™ HFDB-4201 EHV has been designed with a non-migrating stabilizer providing high thermal stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 EHV is recommended especially for the insulation of extra high voltage power transmission cables rated above 230 kV. Specifications HFDB-4201 EHV is designed for use in power distribution and transmission cables. Cables insulated with HFDB-4201 EHV, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067 - AEIC CS9 - ANSI/ICEA: S-108-720 - GB/T 22078

DOW ENDURANCE™ HFDB-4201 SC is a long-life, unfilled, crosslinkable, low density, super clean polyethylene insulation compound developed especially for the insulation of high voltage power cables. DOW ENDURANCE™ HFDB-4201 SC has been designed with a non-migrating stabilizer providing high thermal stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 SC is recommended for the insulation of high voltage power transmission cables rated up to 230 kV. Specifications HFDB-4201 SC is designed for use in power distribution and transmission cables. Cables insulated with HFDB-4201 SC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067, 60840 - CENELEC HD 632 S3 - AEIC* CS9 - ANSI/ICEA*: S-108-720 - GB/T 11017, GB/Z 18890 *Applicable to USA manufactured product only.

DOW ENDURANCE™ HFDB-4201 VC is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound designed for distribution and transmission power cable insulation applications. It has a very low level of contamination and bears the designation Very Clean (VC). DOW ENDURANCE™ HFDB-4201 VC has been designed to have a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance for long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 VC is recommended for the insulation of power distribution and transmission cables rated at less than 150 kV with stresses less than 7 kV/mm. Specifications DOW ENDURANCE™ HFDB-4201 VC is designed for use in power distribution and transmission cables. Cables insulated with DOW ENDURANCE™ HFDB-4201VC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 60502, 60840 - GB/T 12706 - ANSI/ICEA*: S-94-649, S-97-682, S-93-639/NEMA WC74 - CENELEC HD 620 S2 - BSI BS 6622, 7870-4 *Applicable to USA manufactured product only.

Dow ENDURANCE™ HFDC-4202 EC is a long-life, water-tree-retardant, unfilled, crosslinkable, low density polyethylene insulation compound designed for distribution and transmission power cable applications. It has a very low level of contamination and bears the designation Extra Clean (EC). HFDC-4202 EC has been designed to have a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance for long production run lengths during cable manufacture. The permanent tree-retardant additive provides improved performance in power cables in service involving exposure to moisture while retaining the excellent physical, electrical, and processing attributes of conventional, crosslinkable polyethylene. DOW ENDURANCE™ HFDC-4202 EC compound provides electric utilities with: - Advanced, next generation "water" tree-retardant technology, consistently outperforming conventional XLPE and conventional TR-XLPE in accelerated cable wet aging tests at ambient and elevated temperatures - Proven in the field water tree retardance technology for over 25 years, at a broad cross section of geographical conditions, demonstrating excellent reliability and help achieving lowest life cycle costs - Excellent electrical performance demonstrated by very high aged electrical strength and very low aged dissipation factor and power loss. DOW ENDURANCE™ HFDC-4202 EC compound represents an advancement over conventional water tree-retardant, power cable insulation compounds. DOW ENDURANCE™ HFDC-4202 EC is recommended for the insulation of power distribution cables rated up to 46 kV and can be used for transmission cables rated up to 69 kV. Specifications DOW ENDURANCE™ HFDC-4202 EC tree-retardant compound is designed for use in power distribution and sub-transmission cables. DOW ENDURANCE™ HFDC-4202 EC provides improved wet electrical performance and is recommended, with or without moisture barriers, for use as cable insulation up to and including 69 kV applications. Cables insulated with HFDC-4202 EC, using sound commercial fabrication manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 (TR-XLPE requirements) - AEIC: CS8 - RUS 50-70 (U-1) - CEA: WCWG-01, WCWG-02 - UL 1072 - IEC: 60502, 60840 - CENELEC: HD 620 S2 - DIN VDE 0276-620 - BSI BS 6622 - GB/T 12706 - DL/T 1070

Ultra Clean Polyethylene Compound for Extra High Voltage Power Cable Insulation DOW ENDURANCE™ HFDK-4201 EHV is a long-life, crosslinkable, low-density, polyethylene insulation compound of extreme purity developed especially for the insulation of power cables that employ high electrical stresses. DOW ENDURANCE HFDK-4201 EHV is equipped with a non-migrating stabilizer providing high thermal stability, long term stability, and optimum cross linking behavior. Applications: DOW ENDURANCE HFDK-4201 EHV is recommended especially for the insulation of extra high voltage power transmission cables >220kV. Specifications: Cables insulated with DOW ENDURANCE HFDK-4201 EHV would be expected to meet the requirements in the following standards when processed using state-of-the-art cable manufacturing practices - IEC: 62067, 60840 - CENELEC: HD 632 S2 - AEIC: CS9 - ANSI/ICEA: 108-720-2004 - GB/T 11017 , GB/Z 18890

DOW ENDURANCE™ HFDK-4201 SC is a long-life, unfilled, crosslinkable, low density, super clean polyethylene insulation compound developed especially for the insulation of high voltage power cables. DOW ENDURANCE™ HFDK-4201 SC has been designed with a non-migrating stabilizer providing high thermal stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE™ HFDK-4201 SC is recommended for the insulation of high voltage power transmission cables rated up to 230 kV. Specifications HFDK-4201 SC is designed for use in power distribution and transmission cables. Cables insulated with HFDK-4201 SC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067, 60840 - CENELEC HD 632 S3 - GB/T 11017, GB/Z 18890

DOW ENDURANCE™ HFDK-4202 EC Polyethylene Compound is a long life water tree retardant, unfilled, crosslinkable low-density polyethylene compound. The permanent tree retardant additive provides improved performance service involving exposure to moisture while retaining the excellent physical, electrical and processing attributes of crosslinkable polyethylene. DOW ENDURANCE HFDK-4202 EC compound provides electric utilities with: - State-of-the-art "water" tree-retardant technology, consistently outperforming conventional XLPE in all accelerated cable wet aging tests at ambient and elevated temperatures - Technology which has been proven in the field for over 25 years, demonstrating excellent reliability and help achieving lowest life cycle costs - Excellent electrical performance demonstrated by very high aged electrical strength and very low aged dissipation factor and power loss. DOW ENDURANCE HFDK-4202 EC Compound represents the state-of-the-art in tree-retardant, power cable insulation compounds. Specifications DOW ENDURANCE HFDK-4202 EC tree-retardant compound is designed for use in power distribution and sub-transmission cables, especially in underground applications. DOW ENDURANCE HFDK-4202 EC provides improved performance over XLPE cables and is recommended, with or without moisture barriers, for use as cable insulation up to and including 69 kV applications. Cables insulated with DOW ENDURANCE HFDK-4202 EC, using sound commercial manufacturing practice, would be expected to meet the following specifications and regulations: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 (TR-XLPE requirements) - AEIC: CS8 - RUS 50-70 (U-1) - CEA: WCWG-01, WCWG-02 - UL 1072 - IEC: 60502, 60840 - CENELEC: HD 620 S1, Part 1, DIX 3 to 14 - DIN VDE 0276-620 - BSI BS 6622 - GB/T 12706 - DL/T 1070

DOW ENDURANCE™ HFDK-9253 EHV is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound of extreme cleanliness developed especially for the insulation of power cables that employ high electrical stresses. DOW ENDURANCE HFDK-9253 EHV has been designed for cable production processes on horizontal vulcanization lines and for cables with thick insulation manufactured on standard catenary vulcanization lines. DOW ENDURANCE HFDK-9253 EHV has been designed with a non-migrating stabilizer providing high thermal stability, long term stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE HFDK-9253 EHV is recommended especially for the insulation of extra high voltage power transmission cables rated above 230 kV. Specifications Cables insulated with DOW ENDURANCE HFDK-9253 EHV, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067 - AEIC CS9 - ANSI/ICEA: S-108-720 - GB/T 22078

Overview DOW ENDURANCE™ HFDK-9253 S is a long-life, unfilled, crosslinkable, low density, super clean polyethylene insulation compound developed especially for the insulation of high voltage power cables. DOW ENDURANCE HFDK-9253 S has been designed for cable production processes on horizontal vulcanization lines and for cables with thick insulation manufactured on standard catenary vulcanization lines. DOW ENDURANCE HFDK-9253 S has been designed with a non-migrating stabilizer providing high thermal stability, long term stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE HFDK-9253 S is recommended for the insulation of high voltage power transmission cables rated up to 230 kV Specifications DOW ENDURANCE HFDK-9253 S is designed for use in power distribution and transmission cables. Cables insulated with DOW ENDURANCE HFDK-9253 S, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067, 60840 - CENELEC HD632 S2 - AEIC CS9 - ANSI/ICEA: S-108-720 - GB/T 11017, GB/Z 18890

Overview HFDK-9253 is a long-life, unfilled, crosslinkable, low sag, low density polyethylene insulation compound designed for distribution and transmission power cable insulation applications. HFDK-9253 has been designed for cable production processes on horizontal vulcanization lines and for cables with thick insulation manufactured on standard catenary vulcanization lines. HFDK-9253 has a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance for long production run lengths during cable manufacture. HFDK-9253 is recommended for the insulation of power distribution and transmission cables rated up to 69 kV Specifications HFDK-9253 is designed for use in power distribution and sub-transmission cables. Cables insulated with HFDK-9253, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - ANSI/ICEA: S-94-649, S-97-682, S-93-639/NEMA WC74 - AEIC CS8 - UL 1072 - CENELEC HD 620 S2 - IEC 60502, 60840 - GB/T 12706 - BSI BS 6622, 7870-4

DOW HDPE 05962B é um Polietileno de Alta Densidade produzido pela tecnologia de SOLUTION™. Essa resina apresenta distribuição de peso molecular estreita, oferecendo excelente resistência ao impacto em embalagens rígidas, bem como alto brilho, alta rigidez e excelente processabilidade. Também pode ser utilizado em filmes produzidos por matriz plana ou extrusão de perfil para conferir rigidez. Principais aplicações: - Resina para moldagem por injeção - Baldes e caixotes - Filmes produzidos por matriz plana - Filmes para fraldas e de higiene feminina Atende a: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 - ANVISA – RDC No. 052/2010; No. 056/2012; No. 105/1999; No. 326/2019 Consulte regulamentações para obter maiores detalhes

DOW HDPE 08454N é um Polietileno de Alta Densidade com distribuição de peso molecular estreita, oferecendo excelente resistência ao impacto em embalagens rígidas, bem como alta rigidez e excelente processabilidade. Principais aplicações: - Para espumas estruturais, embalagens rígidas industriais, caixas / engradados - Excelente resistência ao impacto, tenacidade e boa rigidez Atende a: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - Canadian HPFB No Objection (With Limitations) - U.S. FDA-DMF - U.S. USP Consulte regulamentações para obter maiores detalhes.

- For toys and housewares - Good low temperature impact strength, gloss and excellent toughness - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. DOW HDPE 17450N is a narrow molecular weight distribution copolymer designed to offer low temperature impact strength and gloss with excellent toughness. This resin has good processability over a wide range of molding conditions.

Polietileno de alta densidade 25055E A resina de polietileno de alta densidade é uma resina de distribuição de peso molecular bastante estreito, desenvolvida para oferecer excelentes propriedades mecânicas, alto brilho e alto acabamento de superfície para peças moldadas por injecção, proporcionando também fácil processamento. Aplicações: - Utensílios domésticos - Recipientes para alimentos - Brinquedos Cumpre com: - UE # 10/2011 - EUA FDA 21 CFR 177.1520 - HPFB Canadense (Sem objecções) Consulte os regulamentos para obter mais detalhes.

HDPE 35054L é um polietileno bimodal de alta densidade para aplicação em moldação por sopro. Essa resina possui um bom equilíbrio entre propriedades mecânicas e uma resistência à quebra sob tensão ambiental (ESCR) bastante alta. Utilização: - Recipientes para: -- Produtos químicos domésticos e industriais (ex.: detergentes e amaciantes) -- Produtos de higiene pessoal e cosméticos -- Alimentos -- Lubrificantes -- Produtos para cuidados com automóveis -- Brinquedos -- Peças automotivas Cumpre com: - Norma 21 CFR 177.1520 (c) 3.2a da FDA dos EUA Consulte os regulamentos para obter mais detalhes

HDPE 35057L é um Polietileno de Alta Densidade Bimodal destinado à aplicações de Moldagem por sopro. Essa resina apresenta um bom balanço entre rigidez e Resistência à Quebra sob Tensão Ambiental (ESCR), adequada para a produção de garrafas, recipientes e peças rígidas ocas. Aplicações: - Recipientes para: -- Químicos industriais e domésticos (por exemplo, detergentes e amaciantes) -- Produtos de cuidado pessoal e cosméticos -- Óleos minerais -- Produtos para cuidado de automóveis - Brinquedos - Partes de automóveis Atende à: - Regulação FDA 177.1520(c)3.2A. - Comissão Regulatória da Europa (EU) No. 10/2011 - América Latina MERCOSUL - Aplicações em Contato com Alimentos: Este produto atende às Normas do MECOSUL: GMC 56/92; GMC 39/19 e GMC 02/12 Consulte as regulamentações para obter mais detalhes.

HDPE 35060A Polietileno de Alta Densidade produzido pelo Processo Slurry. Esta resina apresenta boa resistência ao impacto e à quebra sob tensão em meio agresivo (ESCR).Sua elevada densidade permite reduzir o peso do frasco e manter uma boa rigidez. Principais Características: - Frascos de parede fina para detergentes, óleos minerais, produtos de limpeza, produtos alimentícios, cosméticos - Contentores - Brinquedos - Peças para automóveis Atende à regulamentação: - U.S. FDA 21 177 1520 (c) 3.2a - EU, No 10/2011 - América Latina MERCOSUL - Aplicações em Contato com Alimentos: Este produto atende às Normas do MECOSUL: GMC 56/92; GMC 39/19 e GMC 02/12 Consulte as regulações para detalles completos

HDPE 35060L é um polietileno de alta densidade para aplicação em moldagem por sopro. A distribuição bimodal do peso molecular desta resina resulta em uma resistência alta à quebra sob tensão ambiental, porém sem sacrificar a rigidez (densidade). Sua alta densidade permite que ocorra a redução do peso, mantendo o desempenho do recipiente. É indicado especialmente para a fabricação de garrafas, recipientes e artigos técnicos ocos Utilização: - Recipientes para: -- Produtos químicos domésticos e industriais (ex.: detergentes e amaciantes) -- Produtos de higiene pessoal e cosméticos -- Alimentos -- Óleos minerais -- Produtos para cuidados com automóveis - Brinquedos - Peças automotivas Cumpre com: - U.S. FDA 21 177 1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - América Latina MERCOSUL - Aplicações em Contato com Alimentos: Este produto atende às Normas do MECOSUL: GMC 56/92; GMC 39/19 e GMC 02/12 Verifique os regulamentos para obter todos os detalhes.

HDPE 40055L HF is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers. The viscosity of this resin has been specially tailored for machinery that requires slightly higher fluidity than the one provided by the Dow™ HDPE 40055L. Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc.) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with Regulation: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12. Consult the regulation for complete details

HDPE 40055L é uma resina de polietileno de alta densidade bimodal que combina uma excepcional resistência à quebra sob tensão ambiental (ESCR) com boa rigidez e resistência ao impacto. Seu comportamento reológico permite que esta resina seja ideal para a produção de peças sopradas de médio volume. Aplicações: - Bombonas e recipientes para: -- Líquidos agressivos (detergentes, surfactantes, etc) -- Químicos -- Agroquímicos -- Produtos alimentícios - Bombonas que necessitam de aprovação da UN para transporte de produtos perigosos - Partes Industriais - Extrusão de chapa Cumpre com: - FDA regulation 177.1520(c) 3.2a - América Latina MERCOSUL - Aplicações em Contato com Alimentos: Este produto atende às Normas do MECOSUL: GMC 56/92; GMC 39/19 e GMC 02/12 Consulte os regulamentos para obter todos os detalhes.

HDPE 80017 is a High Density Polyethylene, copolímero of medium molecular weight, produced in the Slurry Process. This resin presents an excellent balance of properties and processability. Because of its molecular structure, this material combines a high impact resistance and Environmental Stress Cracking Resistance (ESCR), with high rigidity, suitable for the fabrication of corrugated pipes of single and double wall. Main Characteristics: - Corrugated pipes of single and double wall - Pipes for drain and waste - Complies with FDA 21 CFR 177.1520(c) 3.2a - Consult the regulation for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

DOW™ HDPE 8262B is high density resin designed for use in reusable boxes and drawers as well as injection of rigid parts. Main Characteristics - High Density Polyethylene Resin (HDPE) - Excellent processability, UV stabilized Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.