Polypropylene (PP): Copolímero Aleatório de PP
Produto | Disponibilidade | Descrição do produto |
---|---|---|
Borealis PP RE239CF | África & Oriente Médio |
RE239CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No.: 9010-79-1
Applications
RE239CF is recommended for:
- Food packaging
- Stationary films
- Lamination films
- Flower packaging
Textile packaging film
Additives
RE239CF contains antiblock and slip agents
Additives Content
Antiblock (SiO2) 1800 ppm Borealis Method
Slip (EAA) 2000 ppm Borealis Method
Calcium stearate Yes Borealis Method
|
Borealis PP RE420MO | África & Oriente Médio |
RE420MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is intended for injection moulding and stretch blow moulding. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
Products originating from this grade have excellent transparency, very good organoleptic properties, good balance of stiffness and impact strength at ambient temperature, low blooming and good demoulding properties.
Applications
- Lids
- Pails
- Closures
- Sweet-boxes
- Bottles
- Houseware containers
Special Features
- stiffness and impact balance
- Improved gloss and excellent transparency
- Low blooming
|
Borealis PP RJ470MO | África & Oriente Médio |
RJ470MO is a specially modified highly-transparent polypropylene random copolymer with very high melt flow rate. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
Additivation has been optimized to provide good antistatic and demoulding properties without blooming or plate-out problems. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Products originating from this grade have excellent transparency and gloss, and good balance of stiffness and impact strength at ambient temperatures.
Applications
- Lids
- Square containers
- Square boxes
Special features
- Good clarity
- Good gloss
- stiffness and impact balance
|
Borealis PP SA233CF | África & Oriente Médio |
SA233CF is a very soft random heterophasic copolymer.
This grade is suitable for use on conventional blown film lines with air cooling.
CAS-No. 9010-79-1
|
Borealis PP SD233CF | África & Oriente Médio |
SD233CF is a very soft random heterophasic copolymer.
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No. 9010-79-1
|
Bormed™ RB801CF-01 | África & Oriente Médio |
Bormed RB801CF-01 is a random copolymer with high ethylene content.
The current version of Bormed RB801CF-01 has been scheduled for deletion.
Please refer to Bormed RB801CF-11 documentation for new projects.
In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process.
This grade is also suitable for blow moulding, including BFS technology and ISBM (1-stage process) for ampoules and bottles up to a maximum of 2 litres.
Applications
Bormed RB801CF-01 has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RB801CF-01 .
- Medical device packaging
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Parenteral nutrition bags
- Pouches for IV solutions
- Secondary packaging
- Ampoules/small bottles for eye, ear & nose drops
- Bottles for IV-solutions
- Bottles/ampoules for injectable solutions
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- Low haze
- High softness
- High impact strength
- Low sealing initiation temperature
- High water vapour barrier
- Sterilisability by means of water steam
- Good contact clarity
- Sterilisabilty with EtO
- Good gloss
- Good surface finish
|
Bormed™ RB801CF-11 | África & Oriente Médio |
Bormed RB801CF-11 is a random copolymer with high ethylene content.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process.
This grade is also suitable for blow moulding, including BFS technology and ISBM (1-stage process) for ampoules and bottles up to a maximum of 2 litres.
|
Bormed™ RB845MO | África & Oriente Médio |
Bormed RB845MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RB845MO is a random copolymer for use in blow moulding, including BFS technology, and ISBM ( 1-stage process) technologies. It can be used for ampoules and bottles up to maximum of 2 litres resulting in a good contact clarity, gloss and surface finish. The bottles can be steam sterilised at 121 °C. Material can also be sterilised with ethylene oxide.
Applications
Bormed RB845MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RB845MO .
- Ampoules/small bottles for eye, ear & nose drops
- Bottles for IV-solutions
- Bottles/ampoules for injectable solutions
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
|
Bormed™ RD804CF | África & Oriente Médio |
Bormed RD804CF is a random copolymer with low ethylene content.
The current version of Bormed RD804CF has been scheduled for deletion.
Please refer to Bormed RD804CF-11 documentation for new projects.
In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process, blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles.
CAS-No.: 9010-79-1
Applications
Bormed RD804CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RD804CF .
- Medical device packaging
- Secondary packaging
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Caps and closures
- Parenteral nutrition bags
- Bottles/ampoules for injectable solutions
- Pouches for IV solutions
- Ampoules/small bottles for eye, ear & nose drops
- Extension and connection tubings
- Bottles for IV-solutions
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- Good optical properties
- High water vapour barrier
- Good impact strength
- Sterilisability by means of water steam
|
Bormed™ RD804CF-11 | África & Oriente Médio |
Bormed RD804CF-11 is a random copolymer with low ethylene content.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process, blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles.
|
Bormed™ RD808CF | África & Oriente Médio |
Bormed RD808CF is a random copolymer with high ethylene content.
The current version of Bormed RD808CF has been scheduled for deletion.
Please refer to Bormed RD808CF-11 documentation for new projects.
In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles.
CAS-No.: 9010-79-1
Applications
Bormed RD808CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RD808CF .
- Medical device packaging
- Secondary packaging
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Ampoules/small bottles for eye, ear & nose drops
- Parenteral nutrition bags
- Bottles for IV-solutions
- Pouches for IV solutions
- Bottles/ampoules for injectable solutions
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- Low sealing initiation temperature
- Low haze
- High water vapour barrier
- High softness
- Sterilisability by means of water steam
- High impact strength
|
Bormed™ RD808CF-11 | África & Oriente Médio |
Bormed RD808CF-11 is a random copolymer with high ethylene content.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles.
|
Bormed™ RE816CF | África & Oriente Médio |
Bormed RE816CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No. 9010-79-1
|
Bormed™ RF825MO | África & Oriente Médio |
Bormed RF825MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RF825MO is polypropylene random copolymer with high melt flow. Material is modified with a nucleating agent resulting in a fast crystallisation which gives possibilities for a fast cycle-time. Products produced from Bormed RF825MO are characterised with a very high transparency, high gloss and a good stiffness-impact balance. Material can be sterilised with ethylene oxide and steam.
Applications
Bormed RF825MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RF825MO .
- Needle hubs
- Blood collection systems
- Catheter connections
- Disposable non pre-filled syringes
- Laboratory disposable
- Diagnostic disposable
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Easy processability
- Excellent transparency
- Good printability
|
Bormed™ RF830MO | África & Oriente Médio |
Bormed RF830MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RF830MO is a transparent polypropylene random copolymer, modified with a nucleating agent, suitable for articles which need post sterilisation with radiation. Bormed RF830MO is characterized by easy processability, high transparency, high gloss and a good stiffness-impact balance. Products moulded from this grade and radiated with the dose of 25 kGy have a shelf-life of 5 years, if properly stored. Material can also be sterilised with ethylene oxide and steam.
Applications
Bormed RF830MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RF830MO .
- Disposable non pre-filled syringes
- Needle hubs
- Catheter connections
- Laboratory disposable
- Diagnostic products
- Blood collection tubes
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
|
Bormed™ RG835MO | África & Oriente Médio |
Bormed RG835MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RG835MO is a transparent polypropylene random copolymer with a high melt flow, modified with slip agent for products requiring a low surface friction. This grade is characterized by easy processability, high transparency, high gloss, controlled low friction and good stiffness-impact balance at ambient temperature. In addition it can be sterilized with ethylene oxide and steam.
Applications
Bormed RG835MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RG835MO .
- Needle hubs
- Needle protection
- Disposable non pre-filled syringes
- Caps and closures
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Improved gloss
- High transparency
- Easy processability
|
Bormed™ RJ880MO | África & Oriente Médio |
Bormed RJ880MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RJ880MO is a specially modified highly-transparent polypropylene random copolymer with very high melt flow rate. It is designed for high-speed injection moulding and contains nucleating agent and demoulding additives. Additivation has been optimized to provide good antistatic and demoulding properties without blooming or plate-out problems. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Products originating from this grade have excellent transparency, good organoleptic properties, good balance of stiffness and impact strength at ambient temperatures.
Applications
Bormed RJ880MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RJ880MO .
- Lids
- Square containers
- Square boxes
- Closures
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- Good flow behaviour
- Very good clarity
- stiffness and impact balance
- Low blooming
|
Bormed™ SB815MO | África & Oriente Médio |
SB815MO is a resin intended for evaluation for use in Healthcare applications.
SB815MO is a grade designed for production of bottles & ampoules for use in Pharmaceutical & Diagnostic applications manufactured via BFS, Extrusion or Injection blow moulding technologies. Final articles can be steam sterilised at 121 °C and are characterised by flexibility, allowing a good collapsibility and good optical properties. Haze of 0,5 mm and 1 mm injection moulded plaques is approximately 10 % and 28 % respectively.
CAS-No. 9010-79-1
|
Bormed™ SC820CF | África & Oriente Médio |
Bormed SC820CF is a soft random heterophasic copolymer.
The current version of Bormed SC820CF has been scheduled for deletion.
Please refer to Bormed SC820CF-11 documentation for new projects.
In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process.
CAS-No.: 9010-79-1
Applications
Bormed SC820CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed SC820CF .
- Medical device packaging
- Pouches for IV solutions
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Secondary packaging
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- High toughness at low temperatures
- High softness
- Sterilisability by means of water steam
- Low haze
- High water vapour barrier
- High impact strength at 23 °C
|
Bormed™ SC820CF-11 | África & Oriente Médio |
Bormed SC820CF-11 is a soft random heterophasic copolymer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process.
CAS-No.: 9010-79-1
Applications
Bormed SC820CF-11 has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed SC820CF-11 .
- Medical device packaging
- Pouches for IV solutions
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Secondary packaging
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- High toughness at low temperatures
- High softness
- Sterilisability by means of water steam
- Low haze
- High water vapour barrier
- High impact strength at 23 °C
|
Bormed™ SC876CF | África & Oriente Médio |
Bormed SC876CF is a very soft random heterophasic copolymer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process.
CAS-No. 9010-79-1
|
Borpact™ SH950MO | África & Oriente Médio |
SH950MO is a random heterophasic copolymer intended for injection moulding. This grade yields high transparency and deep freeze impact resistance combined with excellent flow properties.
The material is nucleated with Borealis Nucleation Technology (BNT). This grade contains antistatic and demoulding additives which, together with enhanced nucleation, create a high potential for cycle time reduction.
Products moulded from this grade have an excellent balance of see-through transparency and deep freeze impact resistance. In addition, components have good gloss, very low stress whitening and excellent taste and odour properties. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction.
Applications
- Ice cream containers
- Crates
- Deep freeze boxes for food storage
- Bread boxes, crates
- Flip top caps, high gloss closures
Special Features
- Good flow
- Good impact strength
- Improved gloss and excellent transparency
- Very low influence on taste & odour
|
BorPure™ RB501BF | África & Oriente Médio |
RB501BF is a random copolymer
CAS-No.: 9010-79-1
Applications
RB501BF has been developed especially for applications like:
- Food packaging
- Label film
- Over wrap film
- Shrink film
Additives
RB501BF contains no slip, antiblock, antistatic additives or nucleating additives
Additives Content
Calcium stearate Yes Borealis Method
Special features
- Excellent processability
- High oxygen barrier properties
- Excellent optical properties
- Very good oil and fat resistance
- High moisture barrier properties
- Good shrink performance
|
BorPure™ RD226CF | África & Oriente Médio |
RD226CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No.: 9010-79-1
Applications
RD226CF is recommended for:
- Food packaging
- Textile packaging film
- Stationary films
- Flower packaging
- Lamination films
Additives
RD226CF contains antiblock and slip agents
Additives Content
Antiblock (SiO2) 1800 ppm Borealis Method
Slip (EAA) 1000 ppm Borealis Method
Slip (OAA) 1000 ppm
Calcium stearate Yes Borealis Method
|
BorPure™ RD266CF | África & Oriente Médio |
RD266CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
Applications
RD266CF is recommended for:
- Food packaging
- Stationary films
- Lamination films
- Textile packaging film
- Flower packaging
Additives
RD266CF is a slip, antiblock and antistatic formulated resin.
|
BorPure™ RE216CF | África & Oriente Médio |
RE216CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
Applications
RE216CF is recommended for:
- Lamination films
- Stationary films
- Food packaging
- Textile packaging film
- Flower packaging
Additives
RE216CF contains antiblock but no slip agent
|
BorPure™ RG466MO | África & Oriente Médio |
BorPure RG466MO is a specially modified high MFR transparent polypropylene random copolymer based on proprietary Borealis Nucleation Technology (BNT), with an excellent organoleptic performance. No tainting of taste & odour of food products and a faster crystallization speed offer benefits towards all parts of the value chain. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
CAS-No. 9010-79-1
Applications
- Closures
- Lids
- Pails
- Square containers
Special features
- Excellent organoleptic properties
- Very good transparency
- Good stiffness and impact balance
- Excellent antistatic properties
|
BorPure™ RJ377MO | África & Oriente Médio |
BorPure RJ377MO is a specially modified high MFR transparent polypropylene random copolymer based on proprietary Borealis Nucleation Technology (BNT), with an excellent organoleptic performance. No tainting of taste & odour of food products and a faster crystallization speed offer benefits towards all parts of the value chain. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
CAS-No. 9010-79-1
|
BorPure™ RJ766MO | África & Oriente Médio |
BorPure RJ766MO is a specially modified high MFR transparent polypropylene random copolymer based on proprietary Borealis Nucleation Technology (BNT), with an excellent organoleptic performance. No tainting of taste & odour of food products and a faster crystallization speed offer benefits towards all parts of the value chain. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
Applications
- Pails
- Square containers
- House ware and thin wall packaging
- Closures
Special Features
- Excellent organoleptic properties
- Very good transparency
- Good stiffness and impact balance
|
Braskem PP 6D20 | América do Norte |
Consistent processability, good regrind, good gloss and clarity, low odor and taste transfer
Applications
Suggested uses include film and extrusion blow molding processes
|
Braskem PP 6D43 | América do Norte |
Consistent processability, good spinning characteristics
Applications
Suggested uses include fiber spinning processes
|
Braskem PP 6D83G | América do Norte |
Consistent processability, low plate-out, low odor and taste, high gloss, good regrind stability, contains clarifying additive
Applications
Suggested uses include bottle and drum applications, blow molding processes
|
Braskem PP 6D83GA | América do Norte |
Random Copolymer
Consistent processability, low plate-out, low odor and taste, high gloss, good regrind stability, contains clarifying additive
Applications
Suggested uses include bottle and drum applications, blow molding processes
|
Braskem PP 6D83K | América do Norte |
Consistent processability, low odor and taste transfer, high gloss, good regrind stability, contains clarifying additive
Applications
Suggested uses include extrusion blow molding processes where enhanced clarity is desired
|
Braskem PP D382.01 | Europa |
BRASKEM Developmental Random copolymer Resin D382.01 has been developed for injection molding of thin wall packaging and consumer containers e.g. food keeper boxes. BRASKEM D382.01 provides very high flowability, excellent optics, superior organoleptics (low taste & odor) and a very good balance of mechanical properties.
Applications:
- Thin Wall Packaging
- Thin Wall Consumer Goods e.g. Housewares, Media Packaging
Process:
- Injection Moulding, Thin Wall Injection Moulding
|
Braskem PP D5001-80 | América do Norte |
High flow for processing ease, fast set-up, superior clarity and gloss, good mold release
Applications
Suggested uses include thin-wall injection molding processes, reusable food containers
|
Braskem PP DP 179A | América Latina |
DP 179A is a medium melt flow rate random copolymer designed for injection moulding. This product offers excellent transparency and gloss, very good stiffness/impact strenght balance, exellent processability and also provides very low odor/taste.
Applications:
High transparency parts with an excellent balance stiffness / impact, Cream cheese cups, Cosmetic packaging, High clarity houseware
Processing:
Injection Molding
|
Braskem PP DP 180A | América Latina |
DP 180A is a high melt flow rate random copolymer designed for injection molding. This product offers outstanding transparency, very good stiffness/impact strength balance and excellent processability.
Applications:
Thin wall injection molded high clarity parts
Processing:
Injection Molding
|
Braskem PP DP 216A | América Latina |
DP 216A is a medium flow rate random copolymer developed for applications in films Stretch. The product do not contain slip additives or anti-blocking agents and is suitable for custom formulations.
Applications:
Film
Processing:
Blown Film Extrusion, Cast film extrusion
|
Braskem PP DR152.00 | Europa |
DR152.00 is developmental performance random copolymer for blow moulding applications. This polypropylene resin exhibits efficient processing, good transparency and contact clarity at balanced level of mechanical properties.
Applications:
- Blow molded containers
- Thermoformed containers
Process:
- Blow Moulding and Sheet extrusion
|