FLEX NORYL WCD944 resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and performance capable of meeting EN 50265-2-1 requirement and is IEC 60754 compliant. FLEX NORYL WCD944 resin is intended for evaluation in wire and cable applications such as optical fiber cable jacketing. It has a Shore A Hardness reading of 95 and exhibits superior thermal stability, very low water absorption, good electric properties, and low specific gravity. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

FLEX NORYL WCP761 resin is a high flow, flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP761 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 78 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCP761 resin is a high flow, flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP761 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 78 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCA955 resin is a flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Styrene Ethylene Butylene Styrene (SEBS) + Polyolefin. This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCA955 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 84 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCA955 resin is a flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Styrene Ethylene Butylene Styrene (SEBS) + Polyolefin. This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCA955 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 84 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCP921 resin is a high flow, flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Styrene Ethylene Butylene Styrene (SEBS) + Polyolefin. This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP921 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 88 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCP921 resin is a high flow, flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Styrene Ethylene Butylene Styrene (SEBS) + Polyolefin. This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP921 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 88 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCP921 resin is a high flow, flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Styrene Ethylene Butylene Styrene (SEBS) + Polyolefin. This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP921 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 88 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCP921A resin is a flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Styrene Ethylene Butylene Styrene (SEBS) + Polyolefin. This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP921A resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 92 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCP921A resin is a flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Styrene Ethylene Butylene Styrene (SEBS) + Polyolefin. This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP921A resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 92 and exhibits low specific gravity, very low water absorption, and dimensional stability.

FLEX NORYL WCV063 resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant with a Shore D Hardness reading of 63. FLEX NORYL WCV063 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra-thin-wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance and good dielectric strength. Processing is typically conducted on standard extrusion equipment and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

FLEX NORYL WCV072 resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant with a Shore D Hardness reading of 72. FLEX NORYL WCV072 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra-thin-wall capability, good scratch abrasion and pinch resistance, High dimensional stability, low shrinkage and warpage. Very low water absorption, chemical resistance, and good dielectric strength. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

LNP FARADEX ZX93134 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing stainless steel fiber and glass fiber. Added features of this grade include: Electrically Conductive, EMI/RFI shielding.

LNP LUBRICOMP ZFG26 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 30% glass fiber, 10% graphite. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZFL31XXC compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 5% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant

LNP LUBRICOMP ZFL31XXC compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 5% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant

LNP LUBRICOMP ZFL34 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZL003 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 15% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZL003 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 15% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZL003 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 15% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZP001XXP compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 5% PTFE/silicone. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZP001XXP compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 5% PTFE/silicone. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZX02622 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing minerals and proprietary lubricant. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZX05506 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 15% graphite powder, 5% PTFE, 20% minerals. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP ZX07421 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRILOY Z2000 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing proprietary lubricant. Added features of this grade include: Wear Resistant.

LNP LUBRILOY Z20001 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing proprietary lubricant. Added features of this grade include: Wear Resistant, Non-Brominated, Non-Chlorinated Flame Retardant.

LNP LUBRILOY ZX06315 is a compound based on PPE+PS Blend resin containing Flame Retardant, Proprietary Lubricant. Added features of this material include: Internally Lubricated, Non-Brominated & Non-Chlorinated Flame Retardant, Flame Retardant, high HDT.

LNP STAT-KON ZD000XXR compound is based on Polyphenylene Ether/Polystyrene (PPE/PS) blend which is electrically conductive with improved toughness and reduced carbon sloughing. This is targeted for applications like IC trays and packaging for semi-conductor industry.

LNP STAT-KON ZE002 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 10% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP STAT-KON ZE0039 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 15% carbon fiber. Added features of this grade include: Electrically Conductive , Flame Retardant.

LNP STAT-KON ZE004 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP STAT-KON ZE004XXQ compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP STAT-KON ZEF061XC compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% glass fiber, 10% milled carbon fiber. Added features of this grade include: Electrically Conductive, Flame Retardant.

LNP STAT-KON ZEL34XXC compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% carbon fiber, 15% PTFE. Added features of this grade include: : Electrically Conductive , Internally Lubricated, Wear Resistant.

LNP STAT-KON ZJK20I is a static dissipative CNT compound based on polyphenylene ether (PPE) + polystyrene (PS) resin with low particulate count and good high heat properties. This material is an excellent candidate for IC tray, Wafer cassette and Slider tray parts in the semiconductor industry.

LNP STAT-KON ZX05009 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 18% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP STAT-KON ZX05043 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing glass fiber, PTFE, carbon fiber. Added features of this grade include: Electrically Conductive, Internally Lubricated, Wear Resistant.

LNP STAT-LOY 9X03508 compound is based on Polyphenylene Ether (PPE) / Nylon 6/6 blend containing proprietary fillers and glass fiber. Added features of this grade include: Permanently Anti-Static, Flame Retardant, High Impact.

LNP THERMOCOMP ZC004XXAR1 compound is based on Polyphenylene Ether / Polystyrene (PPE/PS) blend containing 20% carbon fiber for Large Format Additive Manufacturing (LFAM) applications. Added features of this grade include: Higher Stiffness vs. glass fiber, Lower Thermal Expansion, Improved Hydrolytic Stability, Higher strength to Weight Ratio, Higher Temperature Performance and improved processing vs. ABS based grades.