Generic Acetal (POM) Homopolymer

通用系列： Acetal (POM) Homopolymer • 提供方： Generic

This data represents typical values that have been calculated from all products classified as: Generic Acetal (POM) Homopolymer
This information is provided for comparative purposes only.

一般属性

使用 Prospector 建立免費帳戶時，可造訪 Generic Acetal (POM) Homopolymer 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊

物料形态

Commercial: Active

可用性

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

其他属性

Also Available In, Density / Specific Gravity, Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption @ Sat., Water Absorption Sat/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Nominal Tensile Strain at Break, Tensile Creep Modulus 1h, Tensile Creep Modulus 1000h, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Compressive Strength, Compressive Stress, Poisson's Ratio, Coefficient of Friction, Taber Abrasion Resistance, Wear Factor, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Rockwell Hardness, Rockwell Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Peak Melting Temperature, Melting Temperature, Melting Temperature, CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Specific Heat, Thermal Conductivity, Surface Resistivity, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Dielectric Constant, Relative Permittivity, Dissipation Factor, Dissipation Factor, Arc Resistance, Burning Rate, Melt Density, Drying Temperature, Drying Time, Suggested Max Moisture, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Holding Pressure, Back Pressure, Screw Speed, Injection Notes, Drying Time, Suggested Max Moisture, Extrusion Notes

访问塑料中的 \92 个属性。创建您的免费帐户或登录 Prospector。