Arak LLDPE LL0209AA / LL0209KJ
LL0209AA & LL0209KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.
LL0209AA & LL0209KJ are suitable for general purpose films, neat or in lean blends with LDPE and other ethylene polymers. Lean blends applications include sacks of all types, FFS and agricultural films.
In lean blends they offer the following advantages:
LL0209KJ offers high slip film with easy opening properties when used pure in thickness range 35-100 microns. Addition of other polymers, master batches and pigments or use of other thickness may alter film slip and anti-block performance.
If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.
LL0209AA & LL0209KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.
Recommended melt temperature for extrusion is about 180°C - 225°C.
* LL0209AA & LL0209KJ are suitable for food contact.
LL0209AA & LL0209KJ are suitable for general purpose films, neat or in lean blends with LDPE and other ethylene polymers. Lean blends applications include sacks of all types, FFS and agricultural films.
In lean blends they offer the following advantages:
- Greater draw down.
- Improved hot-tack and lower seal shrinkage.
- Better tear resistance.
- Higher tensile stress and elongation at break.
LL0209KJ offers high slip film with easy opening properties when used pure in thickness range 35-100 microns. Addition of other polymers, master batches and pigments or use of other thickness may alter film slip and anti-block performance.
If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.
LL0209AA & LL0209KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.
Recommended melt temperature for extrusion is about 180°C - 225°C.
* LL0209AA & LL0209KJ are suitable for food contact.
一般属性
使用 Prospector 建立免費帳戶時，可造訪 Arak LLDPE LL0209AA / LL0209KJ 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
文档
description
Technical Datasheet (English)
下载文档可用性
非洲和中东
用途
薄膜
加工方式
薄膜挤出
其他属性
添加剂, 特性, 密度, 熔流率（熔体流动速率）, 薄膜厚度 - 经测试, 可供应的薄膜厚度, MD屈服拉伸强度, TD屈服拉伸强度, MD断裂拉伸强度, TD断裂拉伸强度, MD断裂伸长率, TD断裂伸长率, 落锤冲击, 埃尔曼多夫抗撕强度 MD, 埃尔曼多夫抗撕强度 TD, 维卡软化温度, 光泽度, 雾度, 干燥温度, 熔体温度
加工
Find specific processing information for Arak LLDPE as well as general information for the 线性低密度聚乙烯 generic family. 注册 或 登录 了解更多信息。
购买地点
您可以從 1 個經銷商或製造商處購買 Arak LLDPE LL0209AA / LL0209KJ。 注册 或 登录 了解更多信息。
