SI-LINK™ DFDB-5445 BK
SI-LINK™ DFDB-5445 BK is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5445 BK and is moisture curable. The specific gravity of the system is 1.02. It is recommended for use in low voltage power cable and industrial cable applications. It is formulated to pass the UL-44 horizontal burn test on larger cables.
SI-LINK™ DFDB-5445 BK, a highly filled black flame retardant master-batch, is intended to be used at a 35% concentration along with 60% SI-LINK Polyethylene DFDA-5451 NT and 5% SI-LINK DFDB-5480 NT Catalyst Master-batch on size #2 AWG conductors and larger. At this concentration the requirements for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 cables as defined by UL-44, UL-854 are satisfied.
.
SI-LINK™ DFDB-5445 BK offers flexibility in tailoring the formulation to meet the horizontal burn requirement on a range of cable sizes. At increased concentrations, SI-LINK™ DFDB-5445 BK has been shown to provide horizontal burn test compliance in smaller sizes. The economics of the formulation may be optimized for a particular application depending on the cable sizes produced and the UL submittal sizes selected. Such factors as processing conditions, degree of cure and type of conductor can affect the results, so cable manufacturers must determine the optimal formulations for their applications. Recommendations are available upon request.
SPECIFICATIONS
The SI-LINK™ DFDB-5445 BK system is bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 on sizes 2 AWG and larger. It is suitable for CSA RW-90, and RWU-90 applications.
SI-LINK™ DFDB-5445 BK, a highly filled black flame retardant master-batch, is intended to be used at a 35% concentration along with 60% SI-LINK Polyethylene DFDA-5451 NT and 5% SI-LINK DFDB-5480 NT Catalyst Master-batch on size #2 AWG conductors and larger. At this concentration the requirements for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 cables as defined by UL-44, UL-854 are satisfied.
.
SI-LINK™ DFDB-5445 BK offers flexibility in tailoring the formulation to meet the horizontal burn requirement on a range of cable sizes. At increased concentrations, SI-LINK™ DFDB-5445 BK has been shown to provide horizontal burn test compliance in smaller sizes. The economics of the formulation may be optimized for a particular application depending on the cable sizes produced and the UL submittal sizes selected. Such factors as processing conditions, degree of cure and type of conductor can affect the results, so cable manufacturers must determine the optimal formulations for their applications. Recommendations are available upon request.
SPECIFICATIONS
The SI-LINK™ DFDB-5445 BK system is bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 on sizes 2 AWG and larger. It is suitable for CSA RW-90, and RWU-90 applications.
一般属性
使用 Prospector 建立免費帳戶時，可造訪 SI-LINK™ DFDB-5445 BK 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
可用性
北美洲, 非洲和中东, 拉丁美洲, 欧洲, 亚太地区
其他属性
电缆类型, 密度 / 比重, 抗张强度, 断裂伸长率, 相对电容率, 极限氧指数, 其他性能, 挤压说明
加工
Find specific processing information for SI-LINK™ Moisture-curable Compounds as well as general information for the 聚乙烯，未指定 generic family. 注册 或 登录 了解更多信息。
