AquaGraft® 16 - 6010
MOISTURE CROSSLINKABLE MULTI-COMPONENT SYSTEM BASED ON GRAFTED XLPO POLYMER FOR LOW VOLTAGE WIRE APPLICATIONS (RoHS COMPLIANT)
DESCRIPTION
AquaGraft® 16-6010 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of EPMC-16 grafted base polymer and FMB 6010 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft® 16-6010 will cure with exposure to moisture at ambient temperature over time (depending on cable construction and environmental conditions). AquaGraft® 16-6010 can also be cured at improved rates if exposed to sauna or hot water after extrusion.
APPLICATIONS
AquaGraft® 16-6010 is designed for use in various low voltage applications including building wire, control cables, submersible pump cables, and other specifications requiring superior thermal, mechanical, and electrical properties. This two-component system, when blended in an 80% EPMC-16: 20% FMB 6010 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame tests and perform well for UL-44 building wire applications.
SPECIFICATIONS
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with AquaGraft® 16-6010 will comply with the requirements as specified in the following standards:
UL 44 RHH, RHW, RHW-2, and SIS
CSA 22.2 No. 38-05 for RW-75, RWU-75, R-90, RW-90
FT-2 Flame, UL Horizontal Flame
DESCRIPTION
AquaGraft® 16-6010 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of EPMC-16 grafted base polymer and FMB 6010 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft® 16-6010 will cure with exposure to moisture at ambient temperature over time (depending on cable construction and environmental conditions). AquaGraft® 16-6010 can also be cured at improved rates if exposed to sauna or hot water after extrusion.
APPLICATIONS
AquaGraft® 16-6010 is designed for use in various low voltage applications including building wire, control cables, submersible pump cables, and other specifications requiring superior thermal, mechanical, and electrical properties. This two-component system, when blended in an 80% EPMC-16: 20% FMB 6010 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame tests and perform well for UL-44 building wire applications.
SPECIFICATIONS
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with AquaGraft® 16-6010 will comply with the requirements as specified in the following standards:
UL 44 RHH, RHW, RHW-2, and SIS
CSA 22.2 No. 38-05 for RW-75, RWU-75, R-90, RW-90
FT-2 Flame, UL Horizontal Flame
一般属性
使用 Prospector 建立免費帳戶時，可造訪 AquaGraft® 16 - 6010 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
文档
description
Technical Datasheet (English)
下载文档可用性
北美洲
用途
电线电缆应用
加工方式
挤出
其他属性
RoHS 合规性, 外观, 形式, 密度 / 比重, 抗张强度, 断裂伸长率, 介电强度, 其他性能, 补充信息, 干燥温度, 干燥时间, 料筒1区温度, 料筒2区温度, 料筒3区温度, 料筒4区温度, 口模温度
加工
Find specific processing information for AquaGraft® Low Voltage Insulation as well as general information for the 热塑性，未指定 generic family. 注册 或 登录 了解更多信息。
