AquaGraft® 2-5150
125°C RATED, HIGHLY FLEXIBLE MOISTURE CROSS LINKABLE EPR SYSTEM CONSISTING OF GRAFTED ELASTOMERIC EPR BASE AND FLAME RETARDANT CATALYST MASTER BATCH (RoHS COMPLIANT)
DESCRIPTION
AquaGraft® 2-5150 is a highly flexible moisture crosslinkable, natural, EPR based grafted polymer system that is composed of EPMC-2 and FMB-5150 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft® 2-5150 will cure with exposure to moisture at ambient temperature with time (depending on cable construction and environmental conditions). AquaGraft® 2-5150 can also be cured at accelerated rates by exposure to sauna or hot water after extrusion.
APPLICATIONS
AquaGraft® 2-5150 is designed for use in a variety of 125°C automotive cable applications. These two components, when blended in a 70% EPMC-2/30% FMB-5150 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized requirements and be suitable for flame retardant 125oC applications.
SPECIFICATIONS
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct component ratios will comply with the requirements as specified in the following standards:
ISO 6722
SAE J1127
FT-2 Flame Rating, UL Horizontal Flame
DESCRIPTION
AquaGraft® 2-5150 is a highly flexible moisture crosslinkable, natural, EPR based grafted polymer system that is composed of EPMC-2 and FMB-5150 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft® 2-5150 will cure with exposure to moisture at ambient temperature with time (depending on cable construction and environmental conditions). AquaGraft® 2-5150 can also be cured at accelerated rates by exposure to sauna or hot water after extrusion.
APPLICATIONS
AquaGraft® 2-5150 is designed for use in a variety of 125°C automotive cable applications. These two components, when blended in a 70% EPMC-2/30% FMB-5150 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized requirements and be suitable for flame retardant 125oC applications.
SPECIFICATIONS
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct component ratios will comply with the requirements as specified in the following standards:
ISO 6722
SAE J1127
FT-2 Flame Rating, UL Horizontal Flame
一般属性
使用 Prospector 建立免費帳戶時，可造訪 AquaGraft® 2-5150 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
文档
description
Technical Datasheet (English)
下载文档可用性
北美洲
用途
电线电缆应用
加工方式
挤出
其他属性
特性, RoHS 合规性, 外观, 形式, 密度 / 比重, 抗张强度, 断裂伸长率, 补充信息, 干燥温度, 干燥时间, 料筒1区温度, 料筒2区温度, 料筒3区温度, 料筒4区温度, 口模温度
加工
Find specific processing information for AquaGraft® Low Voltage Insulation as well as general information for the 热塑性，未指定 generic family. 注册 或 登录 了解更多信息。
