AquaGraft® 16 -100
MOISTURE CROSSLINKABLE MULTI-COMPONENT SYSTEM BASED ON GRAFTED XLPO POLYMER FOR LOW VOLTAGE WIRE APPLICATIONS (RoHS COMPLIANT)
DESCRIPTION
AquaGraft 16-100 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of EPMC 16 grafted base polymer, CMB 432 catalyst master batch and FMB 5008 FR/catalyst master batch. These three components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft 16-100 will cure with exposure to moisture at ambient temperature over time (depending on cable construction and environmental conditions). AquaGraft 16-100 can also be cured at improved rates if exposed to sauna or hot water after extrusion.
APPLICATIONS
AquaGraft 16-100 is designed for use in various low voltage applications including building wire, control cables, submersible pump cables, and other specifications requiring superior thermal, mechanical, and electrical properties. This three component system, when blended in a 68/2/30 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame tests and perform well for UL-44 building wire applications.
SPECIFICATIONS
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with AquaGraft 16-100 will comply with the requirements as specified in the following standards:
UL 44 XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, and SIS
CSA 22.2 No. 38-05 for RW-75, RWU-75, R-90, RW-90
FT-2 Flame, UL Horizontal Flame
DESCRIPTION
AquaGraft 16-100 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of EPMC 16 grafted base polymer, CMB 432 catalyst master batch and FMB 5008 FR/catalyst master batch. These three components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft 16-100 will cure with exposure to moisture at ambient temperature over time (depending on cable construction and environmental conditions). AquaGraft 16-100 can also be cured at improved rates if exposed to sauna or hot water after extrusion.
APPLICATIONS
AquaGraft 16-100 is designed for use in various low voltage applications including building wire, control cables, submersible pump cables, and other specifications requiring superior thermal, mechanical, and electrical properties. This three component system, when blended in a 68/2/30 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame tests and perform well for UL-44 building wire applications.
SPECIFICATIONS
When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with AquaGraft 16-100 will comply with the requirements as specified in the following standards:
UL 44 XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, and SIS
CSA 22.2 No. 38-05 for RW-75, RWU-75, R-90, RW-90
FT-2 Flame, UL Horizontal Flame
一般属性
使用 Prospector 建立免費帳戶時，可造訪 AquaGraft® 16 -100 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
Commercial : actif
文档
description
Technical Datasheet (English)
下载文档可用性
Amérique du Nord
用途
Applications fils & câbles
加工方式
Extrusion
其他属性
RoHS Compliance, Aussehen, Form, Dichte / Spezifische Dichte, Zugfestigkeit, Bruchdehnung, dielektrische Durchschlagsfestigkeit, Weitere Eigenschaften, Zusatzinformation, Trockentemperatur, Trockenzeit, Drehzylinder Zone 1 Temp., Drehzylinder Zone 2 Temp., Drehzylinder Zone 3 Temp., Drehzylinder Zone 4 Temp., Ausformwerkzeugtemperatur
加工
Find specific processing information for AquaGraft® Low Voltage Insulation as well as general information for the Thermoplast, Unspezifiziert generic family. 注册 或 登录 了解更多信息。
