AquaGraft® 8020
HALOGEN FREE, HIGHLY FLAME RETARDANT, (HFFR) MOISTURE CROSSLINKABLE SYSTEM FOR LOW VOLTAGE WIRE INSULATING AND CABLE JACKETING APPLICATIONS (RoHS COMPLIANT)
DESCRIPTION
AquaGraft® 8020 is a moisture crosslinkable, natural, XLPO composition designed to be used with CMB-6001 catalyst master batch at a ratio of 93:7. All components are supplied in pellet form and when homogeneously blended in the recommended ratios, will meet numerous low voltage insulating and cable jacketing requirements. When combined with CMB 6001 in the recommended ratio, AquaGraft® 8020 will cure with controlled exposure to moisture using a sauna or hot water after extrusion.
APPLICATIONS
AquaGraft® 8020 is designed for use in various applications including building wire, control cables, tray cables, photovoltaic, power and telecom cable jacketing applications, and other specifications requiring superior flame, thermal, and mechanical properties. This two-component system, when blended in the appropriate blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame and cable tests.
SPECIFICATIONS
When extruded and cured consistent with standard safe and acceptable wire and cable industry practices, cable insulated with AquaGraft® 8020 is designed to comply with the requirements as specified in the following standards. It is important to note that overall cable construction plays an important role in flame, fluid, and electrical performance.
IEEE 1202 - FT4 Flame Exposure
IEEE 383/UL-1685
ICEA S-73-532/ NYC Transit
TUV 2Pfg1169:2007
EN 50618:2014
DESCRIPTION
AquaGraft® 8020 is a moisture crosslinkable, natural, XLPO composition designed to be used with CMB-6001 catalyst master batch at a ratio of 93:7. All components are supplied in pellet form and when homogeneously blended in the recommended ratios, will meet numerous low voltage insulating and cable jacketing requirements. When combined with CMB 6001 in the recommended ratio, AquaGraft® 8020 will cure with controlled exposure to moisture using a sauna or hot water after extrusion.
APPLICATIONS
AquaGraft® 8020 is designed for use in various applications including building wire, control cables, tray cables, photovoltaic, power and telecom cable jacketing applications, and other specifications requiring superior flame, thermal, and mechanical properties. This two-component system, when blended in the appropriate blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame and cable tests.
SPECIFICATIONS
When extruded and cured consistent with standard safe and acceptable wire and cable industry practices, cable insulated with AquaGraft® 8020 is designed to comply with the requirements as specified in the following standards. It is important to note that overall cable construction plays an important role in flame, fluid, and electrical performance.
IEEE 1202 - FT4 Flame Exposure
IEEE 383/UL-1685
ICEA S-73-532/ NYC Transit
TUV 2Pfg1169:2007
EN 50618:2014
一般属性
使用 Prospector 建立免費帳戶時，可造訪 AquaGraft® 8020 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
文档
description
Technical Datasheet (English)
下载文档可用性
北美洲
用途
电线电缆应用
加工方式
挤出
其他属性
特性, RoHS 合规性, 外观, 形式, 密度 / 比重, 抗张强度, 断裂伸长率, 撕裂强度, 肖氏硬度, 极限氧指数, 补充信息, 干燥温度, 干燥时间, 料筒1区温度, 料筒2区温度, 料筒3区温度, 料筒4区温度, 口模温度
加工
Find specific processing information for AquaGraft® Low Voltage Insulation as well as general information for the 热塑性，未指定 generic family. 注册 或 登录 了解更多信息。
