ECCtreme™ ECA 3000
ECCtreme ™ ECA 1 3000 fluoroplastic resin is a class of perfluoroplastic specifically designed for use in extreme applications requiring an operating temperature of up to 300 °C (572 °F) 2 in combination with excellent electrical properties and/or chemical resistance. ECCtreme ™ ECA 3000 fluoroplastic resin was developed in response to industry demand for a melt-extrudable, high-temperature fluoroplastic resin for wire and cable applications. ECCtreme ™ ECA 3000 fluoroplastic resin has been recognized as a 300 °C (572 °F) rated material per UL 746B 2 by UL. Compared with ECCtreme ™ ECA 4000 fluoroplastic resin, ECCtreme ™ ECA 3000 fluoroplastic resin has a lower melt-flow rate (MFR), making it ideal for constructions needing >10 mil (0.254 mm) of insulation. ECCtreme ™ ECA 3000 fluoroplastic resin can also be extruded into rods or tubing, as well as into compression, injection, and transfer molded parts.
ECCtreme ™ ECA 3000 fluoroplastic resin can be melt-processed using standard high-temperature fluoroplastic equipment, at standard operating speeds, and possesses physical, electrical, and chemical properties characteristic of polytetrafluoroethylene (PTFE). Itsfeatures include:
In addition, ECCtreme ™ ECA 3000 fluoroplastic resin demonstrates enhanced properties (e.g., higher melting point, increased melt viscosity, improved stress crack resistance) when subjected to post-processing heat treatment as shown in the table on p. 3. This effect, known as epitaxial co-crystallization (ECC), occurs when the resin is heated between 280–300 °C (536–572 °F) for a prolonged period.
ECCtreme ™ ECA 3000 fluoroplastic resin can be melt-processed using standard high-temperature fluoroplastic equipment, at standard operating speeds, and possesses physical, electrical, and chemical properties characteristic of polytetrafluoroethylene (PTFE). Itsfeatures include:
- UL rated for 300 °C (572 °F) 2
- High melting point of 320 °C (608 °F)
- Excellent dielectric properties
- Excellent chemical and permeation resistance
- Broad wire processing window of operation
In addition, ECCtreme ™ ECA 3000 fluoroplastic resin demonstrates enhanced properties (e.g., higher melting point, increased melt viscosity, improved stress crack resistance) when subjected to post-processing heat treatment as shown in the table on p. 3. This effect, known as epitaxial co-crystallization (ECC), occurs when the resin is heated between 280–300 °C (536–572 °F) for a prolonged period.
一般属性
使用 Prospector 建立免費帳戶時，可造訪 ECCtreme™ ECA 3000 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
Commercial: Active
文档
可用性
Europe, North America
用途
Rods
加工方式
Extrusion
其他属性
Features, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Stress, Tensile Elongation at Break, Tensile Strain at Break, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Durometer Hardness, Shore Hardness, Continuous Use Temperature, Melting Temperature, Thermal Conductivity, Dielectric Constant, Dielectric Constant, Dissipation Factor, Dissipation Factor, Flame Rating, Additional Properties
加工
Find specific processing information for ECCtreme™ as well as general information for the Fluoropolymer generic family. 注册 或 登录 了解更多信息。
