Bormed™ HD850MO
Bormed HD850MO is a medium melt-flow-rate polypropylene homopolymer. This grade gives exceptional good dimensional stability to final products, especially at higher temperatures. The fast crystallisation and its high crystallization temperature give possibilities for the reduction in cycle time. Material can be sterilised with vapour (121°C for 20 min) or EtO.
Applications
Bormed HD850MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HD850MO .
- Dosing units
- Aerosol devices
- Filter housings for Haemodialysis
- Pharmaceutical & diagnostic packaging in solid dose form or for oral and/or topical admistration
- Caps
- Closures
- Bottles & Boxes as Packaging for pharmaceutical & diagnostic products
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High stiffness
- Medical compliance
- Dimensional stability also in autoclave
- Low extractables
一般属性
使用 Prospector 建立免費帳戶時,可造訪 Bormed™ HD850MO 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
Technical Datasheet (English)
下载文档加工
Find specific processing information for Bormed™ Polyolefin as well as general information for the Polypropylen Homopolymer generic family. 注册 或 登录 了解更多信息。