Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.

Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.

Solef® 1010/0HP1 PVDF is a medium viscosity homopolymer resin typically processed by extrusion.

solef ® 1015 PVDF均聚物具有非常高的粘度，适合膜加工。只可以提供粉状材料。

Solef® 11008/0003 PVDF is a low viscosity flexible PVDF copolymer resin and is typically processed by extrusion or injection molding.

solef ® 11010 PVDF是一种中等粘度韧性PVDF共聚物树脂，通常采用挤塑加工。

Solef® 2042 Latex is an aqueous stabilized dispersion that contains approximately 25% by weight of a high molecular weight chemically modified PVDF copolymer (polyvinylidene fluoride) of medium crystallinity, that gives high adhesion to ceramics and separators in combination with low swelling, ideal for its usage in lithium batteries. Solef® 2042 Latex is useful for applications such as water-based impregnation of separators in Li-Ion batteries and energy storage devices. The main properties of Solef® 2042 Latex are: - Good adhesion to separator and to ceramics - Low swelling in electrolyte - Good wettability by electrolyte - Good flexibility - Good lamination to electrodes

solef®21510 PVDF共聚物具有中等粘度，适用于挤塑加工及锂电池应用中的溶液加工。

Solef® 3108/0903 is a low viscosity PVDF resin, it is anti-static and typically processed by extrusion.

Solef® 31508/0003 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.

Solef® 31508/0009 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.

solef ® 31508 PVDF是一种低粘度、高韧性共聚物，用于电线和电缆产品。

Solef® 41308/0001 PVDF is specifically developed for coextrusion.

Solef® 41308/1001 PVDF is specifically developed for powder coating applications.

Solef® 42308/0001 PVDF is specifically developed for coextrusion.

Solef® 460S/461S PVDF homopolymer has high melt viscosity and is typically processed by extrusion.

Solef® 5000S is a crystalline high molecular weight powder form of polyvinylidene fluoride (PVDF) specifically designed for solvent-based non-architectural coatings. It forms mechanically strong and tough films that have a broad useful temperature range. These films are highly resistant to most environmental conditions including gamma radiation and are essentially transparent to ultraviolet radiation. The weathering characteristics of Solef® 5000S coatings lead to excellent performance for the long term. SAFETY Solef® 5000S is stable at temperatures up to 600°F (316°C). When it is subjected to temperatures above 600°F (316°C) for extended periods of time, hydrogen fluoride (HF) begins to evolve, and at temperatures above 700°F (371°C) HF evolution becomes rapid. Solef® 5000S exhibits excellent flame resistance; however, in case of fire, HF and traces of potentially toxic fluorocarbons can be formed. HF is corrosive, causes burns on contact, and has an American Conference Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV-TWA) of 3 ppm (2.5 mg/m³) (1984). Thermal decomposition of Solef® 5000S to HF can also occur in a bake oven in the event that temperatures are not controlled properly. In the event of fire, use NIOSH approved self-contained breathing apparatus and skin protection to protect against volatile decomposition products. Solef® 5000S can be disposed of in an approved landfill, but should not be incinerated unless permitted by applicable law and provision is made for absorption of HF.

Solef® 5120 PVDF is a medium viscosity grade that gives improved adhesion ideal for its usage in lithium batteries.

Solef® 5130 PVDF is an ultra high viscosity grade that gives the best adhesion ideal for its usage in lithium batteries.

Solef® 5140 PVDF is an ultra high viscosity grade that gives superior adhesion and ultra high viscosity at reduced binder content, ideal for its use as binder in Lithium Ion Batteries.

solef ® 6008 PVDF均聚物是一种低粘度聚偏氟乙烯树脂，通常采用注射成型加工。

solef ® 6010 PVDF均聚物具有中等粘度， 一般采用挤塑加工。

solef ® 6012 PVDF均聚物是一种高粘度PVDF树脂，通常采用挤塑或模压成型加工。

Solef® 6020 PVDF 均聚物具有非常高的粘度，用于膜和锂电池。只可以提供粉末材料。

Solef® 60512/0550 and Solef® 60512/0150 are PVDF grades compounded with PTFE for extrusion of anti-wear tapes.

Solef ® 60512 PVDF共聚物熔体粘度高，是离岸管道级材料。

Solef® 75040 PVDF copolymer is a ultra high molecular weight, chemically modified grade that combines excellent adhesion, good flexibility and easy solution process, which makes it ideal for usage in lithium batteries. Main features of Solef® 75040 PVDF are: - Good adhesion - Ultra high molecular weight - Good flexibility

Solef® 75130 PVDF copolymer is a ultra high molecular weight, chemically modified grade that combines excellent adhesion, good flexibility and easy solution process, which makes it ideal for usage in lithium batteries. Main features of Solef® 75130 PVDF are: - Good adhesion - Ultra high molecular weight - Soluble in acetone and ketones - Good flexibility

Carbon fibers reinforced - Injection

Solef ® 9007聚偏氟乙烯均聚物粘度低，用于膜挤出和注射成型。

Solef® 90615 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.

Solef FPCH08/0001 is a low-viscosity PVDF resin typically processed by injection molding.

Solef FPCH09/0001 is a medium-low viscosity PVDF resin typically processed by injection molding.

Solef FPCH10/0001 is a medium-viscosity PVDF resin typically processed by extrusion.

Solef® Latex 2060 is an aqueous dispersion that contains approximately 21% by weight of a high molecular weight PVDF polymer (polyvinylidene fluoride) of high crystallinity. The dispersion is stable against coagulation by conventional means. Solef® Latex 2060 is useful for applications such as water-based impregnation of separators in Li-Ion batteries and energy storage devices. The main properties of Solef® Latex 2060 are: - Good adhesion to separator and to ceramics - Low swelling in hot electrolyte - Good wettability by electrolyte - Good flexibility - Good lamination to electrodes