Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo mechanical properties. Kynar® 1000 HD resin is a standard grade of granules for compression and transfer molding, for extrusion of thick walled parts: blocks, rods, plaques, tubes.

Kynar® resins are fluorinated thermoplastic homopolymers. Kynar® 340 resin is a thermoplastic fluorinated polymer resin. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. More over, this grade is electrically conductive. This grade is available as pellet form for injection, extrusion, compression.

Kynar® resins are fluorinated thermoplastic homopolymers. Kynar® 370 resin is a thermoplastic fluorinated polymer resin. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior with a higher HDT. This grade is especially modified in order to have a reduced mold shrinkage, low thermal expansion factor. Moreover, this grade has an increased thermal and electrical conductivity. This grade is available as pellet form for injection, extrusion, compression.

Kynar® resins are fluorinated thermoplastic homopolymers. Kynar® 400 HDC M800 resin is a thermoplastic fluorinated polymer. This product has been designed for Oil & Gas applications.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 460 resin is a standard grade of granules for extrusion of tubes, cables and plaques, compression and transfer molding.

Kynar® resins are fluorinated homopolymers. Kynar® 50 HDCP 900 is a thermoplastic fluorinated polymer resin. This product has been designed for Oil & Gas applications.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 6000 HD resin is a standard grade of granules for injection molding.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 705 resin is a grade of granules for injection molding, rotomolding applications and multifilament extrusion.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 710 resin is a grade of granules for injection molding, rotomolding applications and multifilament extrusion. This product is ANSI/NSF Standard 61 certified. A powder form is available as Kynar® 711 resin.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties, resistant to gamma, steam and ETO sterilization. Kynar® 720 MED resin is a standard grade of granules for extrusion and injection molding. This product is compliant with the EU positive list. Upon request, letters regarding USP Class VI and ISO10993 part 4 and 5 compliance can be provided.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 720 resin is a standard grade of granules for injection molding. This product is ANSI/NSF Standard 61 certified.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 720 resin is a standard grade of granules for injection molding. This product is ANSI/NSF Standard 61 certified. A powder form is available as Kynar® 721 resin.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 720 E resin is a standard grade of granules for injection molding. This product is ANSI/NSF Standard 61 certified. This product is compliant with the EU positive list.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 740 resin is a standard grade of granules for extrusion of tubes and plaques, compression and transfer molding. This product is ANSI/NSF Standard 61 certified.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 740 resin is a standard grade of granules for extrusion of tubes and plaques, compression and transfer molding. This product is ANSI/NSF Standard 61 certified. A powder form is available as Kynar® 741 resin.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 740 E resin is a standard grade of granules for extrusion of tubes and plaques, compression and transfer molding. This product is ANSI/NSF Standard 61 certified. This product is compliant with the EU positive list.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® 9000 HD resin is a standard grade of granules for injection molding of thin walled parts and multifilament extrusion.

Kynar® resins are fluorinated thermoplastic homopolymers. This product is used for the co-extrusion of Rilsan® polyamides and Kynar® PVDF resins for the preparation of multilayer tubing or film.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® ADX 111 resin allows primer less powder coating (direct adhesion to metals after standard surface preparation. Can be used easily in standard application processes: - Dip coating in fluidized bed - Electrostatic spraying - Hot flocking

Kynar® resins are fluorinated thermoplastic homopolymers. Kynar® ADX 1285-03 resin is a flexible thermoplastic fluorinated functionalized polymer. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. More over, these grades increase the potential of adhesion on materials as polyamides, polyolefins and can be coextruded.

Kynar® resins are fluorinated thermoplastic homopolymers. Kynar® ADX 1720-03 resin is a thermoplastic fluorinated functionalized polymer. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. More over, this grade increases the potential of adhesion on materials as polyamides, polyolefins and can be coextruded.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar® ADX 281 resin allows primer less powder coating (direct adhesion to metals after standard surface preparation. Can be used easily in standard application processes: - Dip coating in fluidized bed - Electrostatic spraying - Hot flocking

KYNAR® ADX FLEX 281 G Is a grafted PVDF powder designed for coating metal parts under extremely severe chemical environments. They provide superior protection against corrosion caused by chemical compounds. Please consult Arkema literature for application method and recommendations.

KYNAR® ADX FLEX 281 G Is a grafted PVDF powder designed for coating metal parts under extremely severe chemical environments. They provide superior protection against corrosion caused by chemical compounds. Please consult Arkema literature for application method and recommendations.

is a flexible thermoplastic fluorinated film. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. These films are specially designed for photovoltaic applications.

Kynar® film 302 PGM TR is a flexible thermoplastic fluorinated film. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. These films are specially designed for photovoltaic applications.

Kynar® Film 502 CUH HC is flexible thermoplastic fluorinated film. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. These films are specially designed for architectural applications.

Kynar® HSV1800 is a commercial functional homopolymer of vinylidene fluoride, specifically designed to be used as a cathode binder in Lithium Ion Batteries. Main Characteristics: - High adhesion - Excellent cathodeslurry stability with Nickel Manganese Cobalt Active Materials - High molecular weight - Functional

Kynar® HSV1810 is a functional homopolymer of vinylidene fluoride, specifically designed to be used as a cathode binder in Lithium Ion Batteries. Main Characteristics: - High adhesion - Excellent cathode slurry stability with Nickel Rich Active Materials - High molecular weight - Functional

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties.

Kynar® resins are fluorinated thermoplastic homopolymers. Kynar® MG15 resin is a crystalline high viscosity polymer of polyvinylidene difluoride. It is an engineering polymer with an outstanding balance of physical strength and high chemical resistance which make it ideal for micro and ultra-filtration membranes for durable water purification and other applications. Kynar® MG15 resin is soluble in selected solvents and can be used in solution processing applications. It is especially recommended for hollow fiber and flat sheet membranes. Kynar® MG15 resin has NSF, FDA, and USP Class VI certifications for use in potable water, food processing, and bio-pharma applications.

Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, excellent mechanical and thermo-mechanical properties. Kynar® UHM 6020-20 resin is a specific grade of granules for injection, extrusion, compression and transfer molding. This grade has specific improved mechanical properties where extreme conditions in temperature and pressure are needed.