Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, barrier properties and high purity. Kynar Flex® 2750-01 resin is a grade of granules to be used where maximum flexibility or impact strength is required. A powder form is available as Kynar Flex® 2751 resin.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, barrier properties and high purity. Kynar Flex® 2751-00 resin is a powder grade where maximum flexibility or impact strength is required.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar Flex® 2800-00 resin is a standard grade of granules, compared to the homopolymer grades, which exhibits a lower modulus, a better resistance to stress cracking in alkaline and oxidizing media, and a lower melting point. For cable coating, extrusion of tube and plaque, compression molding of bulky parts. Additional characteristics: - Easily processed using conventional equipment - Excellent thermal stability - Retains properties after aging - Pigmentable - UL RTI temperature rating 125ºC - Radiation crosslinking

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar Flex® resin is a standard grade of granules, compared to the homopolymer grades, which exhibits a lower modulus, a better resistance to stress cracking in alkaline and oxidizing media, and a lower melting point. For cable coating, extrusion of tube and plaque, injection molding. Additional characteristics: - Easily processed using conventional equipment - Excellent thermal stability - Retains properties after aging - Pigmentable - UL RTI temperature rating 125ºC

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar Flex® 2801 resin is the powder form of the Kynar Flex® 2800-00 resin. To be used an additive in LLDPE to improve the extrusion rate.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar Flex® 2821 resin is the powder form of the Kynar Flex® 2820-20 resin. To be used as an additive in polyethylene to improve the extrusion rate.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 2850 PC resin powder coating is a semi-crystalline copolymer of vinylidene fluoride and hexafluoropropylene. It has a special particle size making it ideal for spray applied powder coating on metal substrates for abrasion and corrosion protection

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 2850 WR resin is a copolymer powder designed for rotomolding and rotolining with processing properties and high chemical resistance equivalent to Kynar Flex® 2850 resin.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar Flex® 2850-00 resin is a standard grade of granules less flexible than the grade Kynar Flex® 2800-00 resin with a higher melting point. For extrusion, wire and cable constructions which require an UL wire ratings to 150 degrees C. Also for applications requiring a UL RTI temperature rating of 140 degrees C. A powder form is available as Kynar Flex® 2851-00 resin.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 2850-02 has been specifically designed for use in wire and cable constructions which require an Underwriters Laboratories temperature of 150ºC and a Limiting Oxygen Index (LOI) of at least 75. Kynar Flex® 2850-02 is easily processed and has excellent physical, mechanical, thermal and flame resistant characteristics. Kynar Flex® 2850-02 meets the smoke and flame requirements of UL 910 and ASTM E84 (the Modified Steiner Tunnel Test). This copolymer is commonly used for pipe, wire jacketing, conduits, and in injection molded parts. ADDITIONAL CHARACTERISTICS: - Excellent thermal stability - Excellent abrasion resistance - Impervious to UV degradation - Self extinguishing material - Extremely low smoke emission characteristics - 0/0 rating in ASTM E-84/UL 723

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties,high purity, good mechanical and thermomechanical properties. Kynar Flex® 2850-04 resin is a standard grade of granules less flexible than the grade Kynar Flex® 2800-20 resin with a higher melting point. It has a UL RTI temperature rating of 140 degrees C.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Kynar Flex® 2850-07 resin is a moderate viscosity version of Kynar Flex® 2850-00 resin in for ease of extrusion and co-extrusion. It has a UL RTI temperature rating of 140 degrees C.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 2900-04 resin is a pelletized, semi-crystalline VF based copolymer. It can be used in extrusion applications such as flexible wire jacketing, or injection molding applications where higher Limiting Oxygen Index is needed for flame and smoke applications. Additional characteristics: - Excellent thermal stability - Excellent abrasion resistance - Extremely flexible and tough Meets UL 910 requirements

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 2950-05 resin is a pelletized, semi-crystalline VF2 based copolymer. It has been designed for wire and cable applications requiring high flexibility and improved resistance to impact.The low molecular weight allows extrusion conditions that reduce jacket shrink back over fiber optic constructions. Additional characteristics: - Excellent thermal stability - Excellent abrasion resistance - Excellent chemical resistance - Impervious to UV degradation - High Limiting Oxygen Index - Extremely low smoke emission characteristics Meets UL910 requirements

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 3030-10 is available in powder form: Kynar Flex® 3031-10.

Kynar Flex® 3030-15 resin is a copolymer of vinylidene fluoride and hexafluoropropylene specifically designed for flexible plenum cables and tubing. Its main characteristics are: - Very high flexibility - High melting point - Excellent low temperature impact resistance - Plenum rated

Kynar Flex® 3030-50 resin is a copolymer of vinylidene fluoride and hexafluoropropylene specifically designed for cable, tubing and heat shrink tubing applications. Characteristics: - Excellent crosslink efficiency - Very high flexibility - High melting point - Excellent low temperature impact resistance A powder form is also available: Kynar Flex® 3031-50.

Kynar Flex® 3050-52 resin is a copolymer of vinylidene fluoride and hexafluoropropylene specifically designed for flexible plenum cables needing low temperature impact properties down to -40°C. Its main characteristics are: - Very high flexibility - High melting point - Excellent low temperature impact resistance of -40°C

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 3120-10 resin is a pelletized, flexible, semi-crystalline copolymer. Kynar Flex® 3120-10 resin is a fluid grade that can be extruded or injection molded to make final products with a 150°C rating. Additional characteristics: - Excellent thermal stability - Excellent abrasion resistance - UL RTI temperature rating of 150°C - Impervious to UV degradation

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 3120-15 resin has been specifically designed for use in wire and cable constructions which require a 150°C rating and improve flame and smoke resistance. Kynar Flex® 3120-15 resin is easily processed and has excellent physical, mechanical, thermal and flame resistant characteristics. Its low viscosity allows easy processing. Additional Characteristics: - Excellent thermal stability - Excellent abrasion resistance - High Limiting Oxygen Index - Extremely low smoke emission characteristics Kynar Flex® 3120-15 resin meets the smoke and flame requirements of UL 910.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 3120-50 is a pelletized flexible, semi-crystalline VF2 based copolymer. It can be molded or extruded and has a useful temperature range from -40°C - 150°C. Kynar Flex® 3120-50 has a UL RTI of 150°C. Kynar Flex® 3120-50 can be used in compounding for cross-linkable wire and cable as well as both wire applications requiring low temperature flexibility and high temperature resistance. Kynar Flex® 3120-50 also finds use as a polymer processing aid (PPA) for polyolefins. The use of Kynar Flex® 3120-50 or Kynar Flex 3121-50 at 200 -1000 ppm levels reduces extruder pressure, improves surface finish, reduces die build up, and improves gauge control.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 3121-50 is a pelletized flexible, semi-crystalline VF2 based copolymer. It can be molded or extruded and has a useful temperature range from -40°C - 150°C. Kynar Flex® 3120-50 has a UL RTI of 150°C. Kynar Flex® 3120-50 can be used in compounding for cross-linkable wire and cable as well as both wire applications requiring low temperature flexibility and high temperature resistance. Kynar Flex® 3120-50 also finds use as a polymer processing aid (PPA) for polyolefins. The use of Kynar Flex® 3120-50 or Kynar Flex 3121-50 at 200 -1000 ppm levels reduces extruder pressure, improves surface finish, reduces die build up, and improves gauge control.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® ADX 2250-05 resin is a semi-crystalline flexible functionalized copolymer designed for co-extrusion with other materials to improve interlayer adhesion. It is particularly suited to tubing, pipe and film co-extrusion applications. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. More over, this grade increases the potential of adhesion on materials as polyamides, polyolefins and can be coextruded.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® LBG resin is a semi-crystalline copolymer. Kynar Flex® LBG is considered a high molecular weight VF2 based copolymers - specifically designed for application in the lithium ion battery market.

Kynar Flex® LBG2200LX is a lithium ion battery grade latex of vinylidene fluoride and hexafluoropropylene designed for high performance. Main Characteristics: • Same backbone as the well-known Kynar Flex® LBG grade • High solid content • Very stable latex

Kynar Flex® LBG8200 is a copolymer of vinylidene fluoride and hexafluoropropylene specifically designed to bring a high level of adhesion between the separator and the battery electrodes. Main Characteristics: • High adhesion • Fast dissolution in typical solvents • High molecular weight

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® PPA 2200 resin is specially designed pellet used as a polymer process aid (PPA) for polyolefins. The use of Kynar Flex® PPA 2200 resin at 200 - 1000 ppm levels reduces extruder pressure, improves surface finish, reduces die build up, and improves gauge control.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® PPA 5300 resin is specially designed pellet used as a polymer process aid (PPA) for polyolefins. The use of Kynar Flex® PPA 5300 resin at 200 - 1000 ppm levels reduces extruder pressure, improves surface finish, reduces die build up, and improves gauge control. This product is also available on a powder form as Kynar Flex® PPA 5301 resin.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® PPA 5300 resin is specially designed pellet used as a polymer process aid (PPA) for polyolefins. The use of Kynar Flex® PPA 5300 resin at 200 - 1000 ppm levels reduces extruder pressure, improves surface finish, reduces die build up, and improves gauge control. This product is also available on a powder form as Kynar Flex® PPA 5301 resin.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® PPA 8600 resin is specially designed pellet used as a polymer process aid (PPA) for polyolefins. The use of Kynar Flex® PPA 8600 resin at 200 - 1000 ppm levels reduces extruder pressure, improves surface finish, reduces die build up, and improves gauge control. This product is also available on a powder form as Kynar Flex® PPA 8601 resin.

Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Ultraflex® resin is a semi-crystalline copolymer of vinylidene fluoride and hexafluoropropylene. This copolymer is a highly flexible material that can be melt processed using typical melt processing equipment or can be easily put in solution for solution coating process. It can be supplied in as pellets for melt processing or as crumb to facilitate dissolution. This is the most flexible Kynar Flex® resin grade available. Additional characteristics: - High flexibility - Toughness - Weatherability - Solution properties