ASA-PC130 is a medium viscosity injection molding grade of acrylonitrile styrene acrylate + PC (ASA+PC) alloy with good chemical resistance and mechanical properties. It is suitable for a wide range of applications.

High flow V-0 rated polycarbonate-ABS alloy, balanced flow and impact.

FRPA100XHF is a high flow injection molding grade of polycarbonate and acrylonitrile butadiene (PC+ABS) alloy with high impact and UV stability. It consists of a non halogenated FR system with UL rating of [email protected].

10% glass reinforced, flame retarded Polycarbonate alloy

FRPA200X is a high flow injection molding grade of polycarbonate + ABS (PC+ABS) alloy with excellent toughness and light stability. It consists of a non-halogenated FR system with a flame rating of V-0/1.5mm and 5VA/2.5mm.

Transparent, Flame-retarded , high impact injection molding polycarbonate

UV, Transparent, Flame-retarded , high impact injection molding polycarbonate

FRPC101UV is a high flow injection molding grade of transparent polycarbonate (PC) with high impact and UV resistance. It consists of a non-halogenated FR system and passes the FAA flammability requirements for FAR25.853a vertical Bunsen burner test.

Improved flame-retarded V0/5V,translucent injection molding polycarbonate

Polycarbonate Siloxane copolymer resin

10% Glass Fiber Reinforced Polycarbonate with superior impact performance UV stabilized, V-0 rated 1.5 mm

Polycarbonate with superior impact performance UV stabilized, V-0 rated 1.5 mm

Polycarbonate with superior impact performance, V-0 rated, 5VA

Transparent, V2-rated polycarbonate

Transparent, UV stabilized, V2-rated polycarbonate

V0-rated 10% glass-filled polycarbonate, excellent impact strength

FRPC400 is a medium viscosity injection molding grade of transparent polycarbonate with high impact resistance. It consists of a non-halogenated FR system with a flame rating of V-0/3mm.

FRPC500UV is a high flow injection molding grade of transparent polycarbonate (PC) with high impact and UV resistance. It consists of a non-halogenated FR system and passes the FAA flammability requirements for FAR25.853a vertical Bunsen burner test.

Lubricated, low friction, Flame-retarded , UV stabilized injection molding polycarbonate

FRPC60UV is a medium viscosity injection molding grade of transparent polycarbonate with high impact and UV resistance. It consists of a non-halogenated FR system and passes the FAA flammability requirements for FAR25.853a vertical Bunsen burner test.

Non-chlorinated, non-brominated flame-retarded V-0 Transparent Polycarbonate

Non-chlorinated, non-brominated flame-retarded V-0 Transparent Polycarbonate UV Stabilized

FRPCT2200 is an injection molding grade of polycarbonate and polybutylene terephthalate (PC+PBT) alloy with improved impact and chemical resistance. It consists of a Brominated FR system with a flame rating of V-0/1.5mm and 5VA/2.5mm.

Blend of Polycarbonate and polyester. UV stabilized Ignition resistant, V-0 and 5VA

FRPCT5050 is an unreinforced high flow injection molding grade of PC and copolyester alloy with good impact resistance, dimensional stability and heat resistance.

FRPCT6000 is an unreinforced high flow injection molding grade of PBT+PC alloy with improved impact and chemical resistance. It consists of a Brominated FR system with a flame rating of V-0/1.5mm.

FRPCT8000 is an unreinforced high flow injection molding grade of PC+PBT alloy with improved impact and chemical resistance. It consists of a Brominated FR system with a flame rating of V-0/1.5mm.

FRPCT8000U is an unreinforced high flow injection molding grade of PC+PBT alloy with improved impact and chemical resistance. It consists of a Brominated FR system with a flame rating of V-0/1.5mm and mold release.

Unique PC/ABS/SMA alloy with improved processing and reduced plate-out

General purpose HB-rated PC/ABS with improved chemical resistance

General purpose HB-rated PC/ABS with improved chemical resistance UV Stable

PC070UR is a high viscosity injection molding grade of PC with mold release. It is UV stabilized and has good processability and optical clarity.

10 melt standard injection molding grade Polycarbonate

10 melt standard injection molding grade Polycarbonate.

10 melt injection molding grade polycarbonate with excellent low-temperature impact

10 melt standard injection molding grade with release

10 melt standard injection molding grade Polycarbonate with UV

10 melt injection molding grade polycarbonate with excellent low-temperature impact, mold release and improved hydrolytic stability compared to regular PC

PC130UR is a medium flow injection molding grade of PC with mold release. It is UV stabilized and has higher optical purity.

15 melt high flow polycarbonate