ADVANCENE™ bEE-4906-AAH is a thermally stabilized bimodal high molecular weight high density polethylene - hexene copolymer, produced using advanced gas phase PE process in a single reactor. It is intended for use in PE-100 pipe applications where the highest standards of long term hydrostatic strength and resistance to slow crack growth are esired. These high performance pipes can be used at higher pipeline operating pressures and have a potential to down-gauge. ADVANCENE™ bEE-4906-AAH has good processability with a high specific output (kg/hr/rpm), exceptional melt strength with very Low Sag, and good fusion compatibility. It is very suitable for large diameter and thick wall pipe but also for small diameter pipes. Main Characteristics: - Natural gas distribution pipes (ISO 4437). - Large diameter industrial piping. - Mining. sewage. and municipal water service lines (ISO 12201, ISO 4427). Complies with: - ISO 12162: PE-1DD. - Russia: Gost 18599 and Gost1 6388. - Australia, New Zealand: All NZS 4130.

ADVANCENE™ bEE-4909-AAH is a bimodal high molecular weight high density ethylene-hexene copolymer, produced using Advanced Gas phase PE Process in a single reactor. Its high molecular weight, bimodal molecular weight distribution and optimum density results in films with high strength, high rigidity and excellent processability. Tubular films of ADVANCENE™ bEE-4909-AAH resin are recommended for high strength grocery sacks, shopping bags and other thin film applications. The combination of strength, toughness and drawdown makes this resin ideal for downgauging in many applications. Films are readily treated and printed to give high-quality graphics. ADVANCENE™ bEE-4909-AAH resin is compatible with color concentrates, thus permitting the production of a variety of colored films that serve as protective and attractive decorative wraps. Main Charactenstlcs: - Hexene High Density Resin. - Bimodal Molecular weight distribution. - High film strength. - Excellent processability and drawdown.

ADVANCENE™ EE-4811-AAH High Density Polyethylene Resin is a high molecular weight, high-density polyethylene copolymer that has been designed specically for tubular film extrusion. Its broad molecular weight distribution and density successfully combine excellent performance at high extrusion rates with high film strength and rigidity. Tubular films of ADVANCENE™ EE-4811-AAH Resin are recommended for high strength grocery sacks. shopping bags and notion and millinery bags. The excellent drawdown characteristic of this product permits production of high-quality thin films for multiwall sack liners and replacements for thin paper products. The combination of strength and drawdown makes this resin ideal for downgauging in many applications. Films are readily treated and printed to give high-quality graphics. ADVANCENE™ EE-4011-AAH Resin is compatible with color concentrates, thus permitting the production of a variety of colored films that serve as protective and attractive decorative wraps. Main Characteristics: - Hexene High Density Resin. - High film strength. - Excellent processability and drawdown.

ADVANCENE™ EM-4810-AAH HDPE Resin is a polymer with broad molecular weight distribution and high molecular weight. This product provides an excellent combination of extrudability and parison stability, which contribute to uniform wall thickness in large parts. ADVANCENE™ EM-4810-AAH HDPE Resin is ideal for blow molding containers of > 80 liters closed head shipping containers and other similar pans. The broad distribution also provides outstanding environmental stress crack resistance (ESCR) at a good rigidity. Because of these characteristics, a wide variety of products, such as industrial chemicals, latex paints, printing inks, foodstuffs, adhesives and other chemical specialties may be packaged in containers produced from this resin. The smooth surface of molded parts is readily treated and printed for high quality applications. Main Characteristics: - Outstanding environmental stress crack resistance. - Excellent parison melt strength/low sag. - Good extrudability/processability. - Good rigidty.

Alathon 8005M-3 is a high molecular weight, high density polyethylene copolymer with broad, bimodal molecular weight distribution. Typical applications are non-pressure-rated pipes. Alathon 8005M-3 meets the following standard: - ASTM D3350 Cell Classifications: PE445540A

Alathon L4903 is a high molecular weight high density copolymer with broad bimodal molecular weight distribution. This resin exhibits excellent machine direction tear in an HMW-HD resin as well as low gel levels. Typical applications include trash can liners and products requiring incorporation of PCR.

Alathon L4907 is a high molecular weight high density copolymer with broad bimodal molecular weight distribution. This resin exhibits high density and stiffness and is selected by customers for use in grooved feed and smooth bore equipment. Typical applications include merchandise bags, grocery sacks, roll stock and produce bags.

Alathon L5005 is a high molecular weight high density copolymer that provides broad bimodal molecular weight distribution, high stiffness and good heat seal response and strength. L5005 is selected by customers for use in merchandise bags, grocery sacks, trash can liners, produce bags and roll stock.

Alathon L5008 is a bimodal, high molecular weight, high density polyethylene resin with excellent processing characteristics. L5008 is selected by customers for demanding pressure pipe applications. When combined with an approved color or black masterbatch at the correct use level, L5008 may meet the following standards or requirements (see Technical Data Sheet for limitations and more information): - ASTM D3350 Cell Classifications: PE445564C, PE445564E, PE445565C, PE445565E - NSF Standard 14 and Standard 61 for Potable Water Pipe and Fittings - NSF Standard 358-1 for PE Pipe and Fittings for "Geothermal" Heat Pump Systems - PE80 per ISO 9080 & ISO 12162 - Plastics Pipe Institute (PPI) PE 3408 and PE4608 per PPI TR-3

Alathon L5008HP is a bimodal, high molecular weight, high density polyethylene resin with excellent processing characteristics. L5008HP is selected by customers for pressure pipe applications including industrial piping, mining, oil & gas gathering, municipal water service lines and sewers. When combined with an approved color or black masterbatch at the correct use level, L5008HP may meet the following standards or requirements (see Technical Data Sheet for limitations and more information): - ASTM D3350 Cell Classifications: PE445574C, PE445574E - NSF Standard 14 and Standard 61 for Potable Water Pipe and Fittings - NSF Standard 358-1 for PE Pipe and Fittings for "Geothermal" Heat Pump Systems - Plastics Pipe Institute (PPI) PE 4710 per PPI TR-3

Alathon L5906 is a high molecular weight high density polyethylene homopolymer with a broad bimodal molecular weight distribution. This resin exhibits excellent stiffness, very high tensile strength, and low gels. L5906 is selected by customers for use in draw tapes and paper replacement applications as well as other mono- and multi-layer films requiring both stiffness and toughness.

ALATHON XL 5906WC is a high molecular weight high density homopolymer with a broad bimodal molecular weight distribution. This resin exhibits excellent stiffness and very high tensile strength. Typical applications for wire and cable include optical fiber buffer tubes.

ALCUDIA® 3802-N is a black medium density compound, designed to meet the requirements for telecommunication and power cables. The outstanding feature of this product is its very good mechanical properties, its excellent stress cracking resistance and good extrudability. It contains well dispersed carbon black and antioxidant in order to ensure UV radiation resistance and thermal ageing respectively. TYPICAL APPLICATIONS Black jacketing of telecommunication and power cables. The ALCUDIA® 3802-N extrusion conditions depend on the type of equipment used. The recommended melt temperature to obtain the optimum results is 215°C - 220°C, together with the use of a screw L/D: 20 and compression rate: 4:1. ALCUDIA® 3802-N meets the following specifications: ISO 1872 PE KHC 40T006/012; ASTM D 1248 II, C5, Grade J5; NF C 32-060 GE2. ALCUDIA® 3802N black compound is a high density polyethylene hexene copolymer of high molecular weight mainly designed for the extrusion of microirrigations tapes. The combination of the antioxidant system and minimum of 2.0 % well dispersed carbon black used in ALCUDIA® 3802N provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Because other good mechanical properties and their characteristics, and an excellent ESCR resistance the polyethylene black compound ALCUDIA® 3802N, is designed to produce: TYPICAL APPLICATIONS - Black microirrigation tapes. - Fittings and valves. Recommended melt temperature range 190 - 210 °C. Processing conditions should be optimised for each production line.

The high density polyethylene ALCUDIA® 47100 is a hexene copolymer of high molecular weight especially apt for the extrusion pipe for protecting cable conduits. Also it can be used as base polymer for identification stripes compound. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS - Pipe for protecting cable conduits. - Base polymer for identification stripes compound. Recommended melt temperature range 190 - 210 °C. Processing conditions should be optimised for each production line.

ALCUDIA® 5502-E natural compound is an hexene copolymer of medium molecular weight apt for the extrusion of corrugated pipes for protection of cables, one or multilayered pipe. This product is supplied in natural colour but it can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques ALCUDIA® 5502E is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, tanks for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good environmental stress cracking resistance can be obtained with ALCUDIA® 5502E due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5502E is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, tanks for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good environmental stress cracking resistance can be obtained with ALCUDIA® 5502E due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line. The high density polyethylene ALCUDIA® 5502E is a hexene copolymer of medium molecular weight, due to its characteristics is specially intended for extrusion of doubled corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210°C. Processing conditions should be optimised for each production line.

This resin is a high molecular weight, high density copolymer polyethylene. It exhibits superior impact strength and ESCR. This product meets US FDA 21 CFR 177.1520.

This resin is a high molecular weight, high density copolymer polyethylene resin. This resin exhibits superior impact strength and ESCR and contains a process stabilizer. This product meets US FDA 21 CFR 177.1520.

This resin is a high molecular weight, high density copolymer polyethylene resin. This resin exhibits superior impact strength and ESCR and contains a process stabilizer. This product meets US FDA 21 CFR 177.1520.

Characteristics: - Bimodal molecular weight distribution - Excellent tear strength - Exceptional impact strength - Excellent processability Applications: - T-shirt sacks - Trash can liners - Merchandise bags - Multi-wall liners - Deli wrap

Characteristics: - Excellent processability - Good melt strength - Excellent stress cracking resistance - Good rigidity - Excellent impact strength Applications: - Industrial parts - Pallets - Large foam parts - Suitable for food packaging - Toys - Sheet

Characteristics: - Good melt strength - Good stress cracking resistance - Good rigidity - Excellent impact strength Applications: - Industrial parts - Jerry cans - Pallets - Large foam parts - Suitable for food packaging - Toys - Sheet

BorPEX HE1878 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X) Applications BorPEX HE1878 is recommended for the production of crosslinked pipes used in - Plumbing - Domestic water - Domestic gas - District heating - Relining - Industrial applications - Heating Specifications BorPEX HE1878 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 16892 - DIN 16893 - EN ISO 15875 - ASTM F 876 Special features BorPEX HE1878 is a free flowing powder for the PE-Xa, peroxide crosslinking process.The material is only stabilized for transporting and storage. Crosslinking agent (e.g. peroxide) and stabilisers have to be added by the pipe manufacturer. Good crosslink response and well-balanced powder size distribution enable effective soaking and a stable pipe production. - Economical pipe production - Cleanliness - Enhanced processability - Excellent product consistency

BorPEX HE1878E is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X). BorPEX HE1878E is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 16892 - DIN 16893 - EN ISO 15875 - ASTM F 876 BorPEX HE1878E is a free flowing powder for the PE-Xa, peroxide crosslinking process.The material is only stabilized for transporting and storage. Crosslinking agent (e.g. peroxide) and stabilisers have to be added by the pipe manufacturer. Good crosslink response and well-balanced powder size distribution enable effective soaking and a stable pipe production.

HE1878E-C2 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X) Applications HE1878E-C2 is recommended for the production of crosslinked pipes used in - Plumbing - Heating - District heating - Relining - Industrial - Domestic gas - Domestic water Specifications HE1878E-C2 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - ASTM F 876 - DIN 16892 - EN ISO 15875 - DIN 16893 Special features HE1878E-C2 Is a pelletized material in minipellet form for the PE-Xa, peroxide crosslinking process. The material is fully stabilized for the heating and plumbing application. Crosslinking agent (e.g. peroxide) has to be added by the pipe manufacturer. Good crosslink response and well-balanced pellet size distribution enable effective soaking and a stable pipe production. The material furthermore is accredited with the highest chlorine resistance rating available (Class 5 listing according to ASTM F876).

BorPEX HE2590 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X) Applications BorPEX HE2590 is recommended for the production of crosslinked pipes used in - Domestic water - Heating - Relining - Plumbing - Industrial applications - Domestic gas - District heating The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer with integrated EVOH layer and aluminium multilayer pipes. Specifications BorPEX HE2590 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 16892 - DIN 16893 - EN ISO 15875 - ASTM F 876 Special features BorPEX HE2590 is a ready made compound in pellet form for the production of crosslinkable pipes by the electron beam beta-irradiation process (PE-Xc) and included is a specially selected additive package to ensure: - Enhanced processability - Economical pipe production - Excellent product consistency - Effective crosslinking behaviour - High temperature resistance - High resistance to additive washout

BorPEX HE2591 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X) Applications BorPEX HE2591 is recommended for the production of crosslinked pipes used in - Plumbing - Heating - Domestic gas - Domestic water - Industrial applications - Relining - District heating Specifications BorPEX HE2591 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 16892 - DIN 16893 - EN ISO 15875 - ASTM F 876 Special features BorPEX HE2591 is a free flowing powder for the PE-Xa, peroxide crosslinking process.The material is only stabilized for transporting and storage. Crosslinking agent (e.g. peroxide) and stabilisers have to be added by the pipe manufacturer. Good crosslink response and well-balanced powder size distribution enable effective soaking and a stable pipe production. - Enhanced processability - Economical pipe production - Cleanliness - Excellent product consistency

BorPEX HE2595 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X). The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer with integrated EVOH layer and aluminium multilayer pipes. BorPEX HE2595 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 16892 - DIN 16893 - EN ISO 15875 - ASTM F 876

HWB-1048 is a certified prime grade High Molecular Weight polyethylene copolymer developed for BLOW MOLDING and THERMOFORMING of high performance large size industrial parts. HWB-1048 features good processability, good melt strength and rigidity, excellent combination of low temperature Impact strength, and chemical resistance. HWB-1048 applications include 55-gallon shipping containers, chemical and fuel tanks, carrying cases, automotive parts, tool boxes, truck-bed liners, and playground equipment. HWB-1048 recommended processing temperature is 190 to 210°C. HWB-1048 complies with FDA regulation 21CFR 177.1520(c) 3.1a + 3.2a (conditions of use B through H) and with most international regulations concerning the use of Polyethylene in contact with food articles.

HWB-1051 is a certified prime grade Hexene copolymer High Molecular Weight developed for BLOW MOLDING of high performance medium to large size industrial containers. HWB-1051 features good processability, good melt strength, excellent combination of ESCR, high Impact strength, Stiffness, good Thermoform ability, and good chemical resistance. HWB-1051 applications include 20 to 55 gallon containers, chemical and gasoline tanks, carrying cases, automotive parts, tool boxes, truck-bed liners, and sheet, pipe and profile extrusion. HWB-1051 recommended processing temperature is 190 to 210°C.. HWB-1051 complies with FDA regulation 21CFR 177.1520 (c )3.1(a) + 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles.

HWB-554 is a certified prime grade Hexene copolymer High Molecular Weight developed for BLOW MOLDING of high performance medium to large size industrial containers. HWB-554 features High-Swell, consistent processability, outstanding combination of ESCR, Impact strength, Stiffness, Creep resistance, and excellent chemical resistance. HWB-554 applications include 55 gallon drums, shipping containers, industrial tanks, agrochemicals, automotive parts, tool boxes, carrying cases, sport articles, ski and baggage car boxes. HWB-554 recommended processing temperature is 210 to 230°C.. HWB-554 complies with FDA regulation 21CFR 177.1520 (c) 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles.

DuraSurf™ E801 is a high transparency HDPE extruded running surface with a molecular weight of 300,000 g/mole for silkscreen printing for ski and snowboard construction. Product Thickness Range: 0.5 mm up to 1.5 mm Product width range: 50 mm up to 750 mm Sanding: One side, standard. Two side, optional Surface Treatment: Two side standard. One side, optional.

Applications: - 55 gallon plastic drums, chemical tanks for agriculture, automobile gasoline tanks. Characteristics: - The Exelene resin HDPE 5100M meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

Applications: - 55 gallon plastic drums, chemical tanks for agriculture, automobile gasoline tanks. Characteristics: - The Exelene resin HDPE 54050M meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

Applications - Rectangular and T-Shirt bags with side labels for supermarkets and stores, pre-cut bag rolls for fruits and vegetables, and liners for boxes and cans. Characteristics - The Exelene resin HDPE 7000 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

Applications: - Corrugated pipe - Non pressure pipe extrusion Characteristics: - The Exelene resin HDPE PE80 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

HPA 020HD5 is a high molecular weight HDPE resin, characterized by an excellent balance of rigidity, ESCR and impact strength.