Alathon H6012 is medium molecular weight high density polyethylene homoopolymer selected by customers for use in cast film applications. Typical applications for this resin include extrusion coating, blends with LDPE and laminations.

Alathon H6018 is a medium molecular weight high density homopolymer. Typical applications include cast film, extrusion coating and dry food overwraps.

Alathon L5045 is a medium molecular weight high density copolymer for use in blown film extrusion applications. Typical applications include millinery bags, coextrusions and plastic netting.

Alathon L5485 is a medium molecular weight, high density polyethylene copolymer for use in blown film applications. Typical applications include general-purpose HDPE film applications such as overwrap, laminating base films, food packaging and oriented tapes.

Alathon L5845 is a medium molecular weight high density homopolymer for use in blown film applications. Typical applications include paper replacement, coextrusions, slit tape, and laminations.

Alathon L5885 is a medium molecular weight high density polyethylene homopolymer for use in blown film applications. Typical applications include those with low WVTR requirements.

Alathon M5410 is a medium molecular weight high density polyethylene copolymer for use in blown film applications.

Alathon M6010-2 is a medium molecular weight high density polyethylene homopolymer for use in blown film applications. Typical applications include those with low WVTR requirements.

Alathon M6010SB is a medium molecular weight high density polyethylene homopolymer for use in blown film applications. Typical applications include those with low WVTR requirements.

Alathon M6020 is a medium molecular weight high density homopolymer for use in blown or cast film applications. This resin provides extremely low gel content and high stiffness. Typical applications include dry food packaging, overwrap and WVTR.

Alathon M6020SB is a medium molecular weight high density polyethylene homopolymer for use in blown film applications. Typical applications include those with low WVTR requirements.

Alathon M6030 is a medium molecular weight high density homopolymer with extremely low gel content. Typical applications for this resin are cast film, coextrusion and dry food packaging.

Alathon M6060 is a medium molecular weight high density homopolymer with extremely low gel content. This resin provides high stiffness and narrow molecular weight distribution for use in cast film applications. Typical applications for this resin are dry food packaging, overwrap and WVTR.

Alathon M6210 is a medium molecular weight high density homopolymer. Typical applications for this resin are blown film, coextrusion and low WVTR.

The high density polyethylene ALCUDIA® 5606T is a homopolymer of medium molecular weight. Due to its good processability characteristics is specially intended for extrusion of doubled corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210 °C. Processing conditions should be optimised for each production line.

The high density polyethylene ALCUDIA® 5703A is a homopolymer of medium molecular weight specially intended for extrusion of mono and doubled wall corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. The ALCUDIA® 5703A has an excellent balance between rigidity and others properties as the impact strength. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210°C. Processing conditions should be optimised for each production line.

Characteristics: - Bimodal molecular weight distribution - Good tear strength - Good impact strength - Good processability - Excellent bubble stability Applications: - T-shirt sacks - Trach can liners - Merchandise bags - Coextruded films

Characteristics: - Medium molecular weight - Very high density - Excellent processability - Superior stiffness Applications: - Blow molding - Profile extrusion - General purpose - Food packaging

Characteristics: - Medium molecular weight - Narrow molecular weight distribution - Designed for high speed orientation Applications: - Monofilament - Slit tape - Woven and knitted fabrics - Specialty films

Characteristics: - Bimodal molecular weight distribution - High moisture barrier grade - High stiffness - Good processability - High tensile strength - Good heat resistance Applications: - Cereal liners - Cracker overwrap - Bakery mixes - Specialty films - Coextruded films - Machine direction oriented films (MDO)

Characteristics: - Bimodal molecular weight distribution - High stiffness - High tensile strength - Good heat resistance - Excellent bubble stability - Good compatibility with LDPE and LLDPE Applications: - Release liners - Stand-up bags - Coextruded films - Heavy duty shipping sacks - Multi-wall liners - Oriented film structures - Specialty packaging - Machine direction oriented films (MDO)

Characteristics: - Bimodal molecular weight distribution - Excellent processing and melt strength - Excellent stress crack resistance - Meets material requirements for ASTM F2160 Applications: - Conduit - Profile Extrusion - Corrugated pipe

Characteristics: - Excellent processability - Good tear and impact strength - Good stiffness - Excellent compatibility with LDPE and LLDPE - Excellent drawdown Applications: - Multi-wall liners - Gas flush poultry bags - Sercurity bags - Courier bags - Heavy-duty shipping sacks - Fresh cut produce packaging - Coextruded films

Characteristics: - Unique combination of high stiffness and clarity - Excellent moisture barrier properties - Good processing - Compatibility with LDPE and LLDPE Applications: - Cereal liners - Stand-up bags/ pouches - Tissue and towel overwrap films - Release liners - Envelope windows - Specialty films - Machine direction oriented (MDO) films

HMF-0856 is a certified prime grade Hexene copolymer MEDIUM MOLECULAR WEIGHT developed for production of thin gauged high stiffness paper-like Blown films. HMF-0856 features BROAD molecular weight distribution for improved processability at lower extruder pressure, excellent film drawdown, and good combination of high film stiffness with good film strength and improved barrier properties. HMF-0856 can be easily processed in HMW high stalk film equipment or in conventional film lines equipped with die gap = 0.75 to 1.25 = mm.. HMF-0856 applications include deli, meat & cheese wrap films, cereal box liners, notion and millinery bags, small shoppers, multi-wall and single liners, lamination films, coextrusion of films for stand-up-still pouches, and as substitute films for grease-proof waxed and acid free papers. Minimum recommended film gauge is 12 microns (0.5 mil), and processing temperature 195° to 205° C. HMF-0856 complies with FDR regulation 21CFR 177.1520 (c) 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles.

Formolene E922 is a medium molecular weight grade of HDPE designed for good processing characteristics and good film stiffness for thin gauge film applications. Formolene E922 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications: - Shopping Bags - Trash Can Liners - Thin Film for Laminate Applications

This data represents typical values that have been calculated from all products classified as: Generic HDPE, MMW This information is provided for comparative purposes only.

Hostalen GF 9045F is a high density Polyethylene, having medium molar mass and a narrow molecular mass distribution. This product is not intended for use in medical and pharmaceutical applications.

This resin in manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992).

MARPOL® HDB 506 is a medium molecular weight, high density polyethylene with excellent stiffness and melt uniformity. Recommended Applications Food packaging, liquid food containers, milk containers, juice containers, water containers, thermoformed parts and thin gauge sheet.

Description MARPOL® HDB 507 is a medium molecular weight distribution high density polyethylene homopolymer. This resin exhibits excellent processing uniformity and produces bottles with great appearance and rigidity. This resin has superior barrier properties and imparts minimum odor and taste to the packaged product. Recommended Applications Food packaging, liquid food containers for milk, water and juice containers. Also good thermoformed parts.

- HD5595 is a medium molecular weight high density copolymer that provides narrow molecular weight distribution. Its ideal for high speed orientation. - Applications for Osterlene HD5595 include tape, fabrics, film, monofilament. - Contact your Osterman Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

HD2845 is a medium molecular weight High Density Polyethylene copolymer blow moulding resin, suited for use in applications where ESCR is a major requirement. HD2845 may be used in household & industrial chemical (HIC) containers such as detergent and bleach bottles. HD2845 is also suitable for Dangerous Goods (DG) applications - depending on the design of the container, the goods to be stored and the DG grouping. Suitability for use in any application should be determined by appropriate performance testing. HD2845 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

Rigidex® HD4820EA is a medium molecular weight high gloss copolymer high density polyethylene. It has been formulated to give excellent bottle gloss/surface finish using conventional blow moulding equipment without the use of masterbatches. Typical applications - Blow moulded bottles with capacities of up to 1 litre Benefits and Features - Excellent gloss - Easy processing - Good rigidity - Environmental stress crack resistance - Good impact strength

Rigidex® HD5502S is a medium molecular weight copolymer grade supplied in pellet form which has an optimum balance of properties for use in a wide range of blow moulding and extrusion applications including bottles. Benefits & Features - Easy processing - Good rigidity - Good environmental stress cracking resistance - Good impact strength Applications - Blow moulded containers up to 30 liters capacity for packaging chemicals, many household products, oils and foodstuff - Sheet - Extruded net

Rigidex® HD5802BM is a new bimodal medium molecular weight copolymer grade supplied in pellet form. It has an outstanding stiffness and environmental stress crack resistance (ESCR) balance making it ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. Typical applications - Blow moulded containers up to 10 litres capacity for packaging chemicals, many household products, oils and foodstuffs - Sheet extrusion Benefits and Features - High rigidity - Outstanding environmental stress cracking resistance - High impact strength - Easy processing

Polyethylene bimodal medium molecular weight copolymer Benefits & Features RIGIDEX® HD5802BM-R is a new bimodal medium molecular weight copolymer grade supplied in pellet form. It has an outstanding stiffness and environmental stress crack resistance (ESCR) balance making it ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. - High rigidity - Outstanding environmental stress cracking resistance - High impact strength - Easy processing Applications - Blow moulded containers up to 10 liters capacity for packaging chemicals, many household products, oils and foodstuffs - Sheet extrusion

Rigidex® HD6007S is a medium molecular weight polyethylene grade supplied in pellet form for use in a wide range of blow moulding and extrusion applications. Benefits and Features - Very easy processing - High rigidity - Good surface finish Typical applications Lightweight containers produced at high speeds, e.g. bottles for packaging powders, milk and chemical products which have a low environmental stress cracking activity

SABIC® HDPE F01552 is a medium molecular weight High Density Polyethylene specifically designed for blown film extrusion and can be used in tape and thin wall pipe extrusion. It has a broad molecular weight with excellent extrudability, high film strength and draw down characteristics. The material contains anti oxidant.

SABIC® HDPE FJ01552 is a TNPP free grade. It is a medium molecular weight High Density Polyethylene designed for blown film extrusion. It has a broad molecular weight with excellent extrudability. The design of the product, molecular architecture and density, gives it a unique combination of easy extrusion and strong physical properties which makes it suitable for producing thin films with excellent strength and rigidity.