BYNEL™ 4600 series resins are anhydride-modified, very low-density polyethylene (VLDPE) resins. All 4600 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. BYNEL™ 46E1052 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. Composition - High% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0% Characteristics / Benefits - Physical properties of BYNEL™ 4600 series resins are typical of very low-density polyethylene resins with similar density and melt index values. Applications - BYNEL™ 4600 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers. BYNEL™ 4600 series resins can be used in coextrusion processes including: - blown film - cast film/sheet - blow molding - melt and solid phase thermoforming - sheet and tubing

BYNEL™ 4600 series resins are anhydride-modified, very low-density polyethylene (VLDPE) resins. All 4600 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. BYNEL™ 46E1060 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. Composition - Ultra High% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0% Characteristics / Benefits - Physical properties of BYNEL™ 4600 series resins are typical of very low-density polyethylene resins with similar density and melt index values. Applications - BYNEL™ 4600 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers. BYNEL™ 4600 series resins can be used in coextrusion processes including: - blown film - cast film/sheet - blow molding - melt and solid phase thermoforming - sheet and tubing

Clearflex CH D0 BA is recommended for applications in which soft touch and flexibility are required, forimprovement of impact resistance when used as additive in blend with other polyolefins formulated with orwithout mineral fillers. It has a high stretchability and an optimum cling effect. Sustainability The “bio attributed” product Clearflex CH D0 BA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CH D0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CH D0 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex CH D0 BA will be bio attributed for 75%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CH D0 BCA is recommended for applications in which soft touch and flexibility are required, forimprovement of impact resistance when used as additive in blend with other polyolefins formulated with orwithout mineral fillers. It has a high stretchability and an optimum cling effect. Sustainability The “bio circular attributed” product Clearflex CH D0 BCA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CH D0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CH D0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex CH D0 BCA will be bio circular attributed for 75%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CH D0 is a linear low density polyethylene, with antioxidants, characterised by a very low density (VLDPE). The resin has a high stretchability and an optimum cling effect. Main Application Clearflex CH D0 is recommended for applications in which soft touch and flexibility are required, for improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CH D0 is also used as cling agent in stretch film.

Clearflex CH G0 BA is recommended for applications in which soft touch and flexibility are required and for improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. It has an excellent compatibility with polyolefins and fillers. Sustainability The “bio attributed” product Clearflex CH G0 BA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CH G0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CH G0 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex CH G0 BA will be bio attributed for 75%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CH G0 BCA is recommended for applications in which soft touch and flexibility are required and for improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. It has an excellent compatibility with polyolefins and fillers. Sustainability The “bio circular attributed” product Clearflex CH G0 BCA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CH G0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CH G0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex CH G0 BCA will be bio circular attributed for 75%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CH G0 is a linear low density polyethylene, with antioxidants, characterised by a very low density (VLDPE). The resin has an excellent compatibility with polyolefins and fillers. Main Applications: Clearflex CH G0 is recommended for applications in which soft touch and flexibility are required, for improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers.

Clearflex CL B0 BA is recommended for applications in which soft touch and flexibility are required andfor the improvement of impact resistance when used as additive in blend with other polyolefinsformulated with or without mineral fillers. Clearflex CL B0 BA is also used as cling agent in stretch film. Sustainability The “bio attributed” product Clearflex CL B0 BA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CL B0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CL B0 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex CL B0 BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CL B0 BCA is recommended for applications in which soft touch and flexibility are required and for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CL B0 BA is also used as cling agent in stretch film. Sustainability The “bio circular attributed” product Clearflex CL B0 BCA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CL B0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CL B0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex CL B0 BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CL B0 is a linear low density polyethylene, with antioxidants, characterised by a very low density (VLDPE). The resin has a high stretchability and a good cling effect. Main Application Clearflex CL B0 is recommended for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CL B0 is also used as cling agent in stretch film.

Clearflex CL D0 BA is recommended as cling agent in stretch film but it is also used for applications in which softtouch and flexibility are required, for the improvement of impact resistance when used as additive in blendwith other polyolefins formulated with or without mineral fillers. Sustainability The “bio attributed” product Clearflex CL D0 BA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CL D0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CL D0 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex CL D0 BA will be bio attributed for 75%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CL D0 BCA is recommended as cling agent in stretch film but it is also used for applications in which softtouch and flexibility are required, for the improvement of impact resistance when used as additive in blendwith other polyolefins formulated with or without mineral fillers. Sustainability The “bio circular attributed” product Clearflex CL D0 BCA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CL D0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for cast film technology. The production of Clearflex CL D0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex CL D0 BCA will be bio circular attributed for 75%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CL D0 is a linear low density polyethylene, with antioxidants, characterised by a very low density (VLDPE). This resin is produced with a proprietary technology. Stretch films manufactured with Clearflex CL D0 have high stretchability, outstanding clarity and very high constancy in cling effect. Main Application Clearflex CL D0 is recommended as cling agent in stretch film but it is also used for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers.

Clearflex FF D0 BA is characterised by a very low density and high molecular weight. Films made with Clearflex FF D0 BA are highly transparent, have excellent sealing properties, mainly at low temperature, and outstanding mechanical performances. Sustainability The “bio attributed” product Clearflex FF D0 BA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex FF D0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for blown film technology. The production of Clearflex FF D0 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex FF D0 BA will be bio attributed for 75%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex FF D0 BCA is characterised by a very low density and high molecular weight. Films made with Clearflex FF D0 BCA are highly transparent, have excellent sealing properties, mainly at low temperature, and outstanding mechanical performances. Sustainability The “bio circular attributed” product Clearflex FF D0 BCA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex FF D0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene with antioxidants characterised by a very low density and suitable for blown film technology. The production of Clearflex FF D0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex FF D0 BCA will be bio circular attributed for 75%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex FF D0 is a linear low density polyethylene, with antioxidants, suitable for blown film technology. The product is characterised by a very low density and high molecular weight. Films made with Clearflex FF D0 are highly transparent, have excellent sealing properties, mainly at low temperature, and outstanding mechanical performances. Main Application Clearflex FF D0 is recommended to produce stretch film and is used in blend or coextrusion because of its unique properties.

Clearflex MP D0 BA is suitable for injection moulding. Manufacts made by Clearflex MP D0 BA are characterised by a high flexibility. It is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance. The resin shows an excellent balance between flexibility and impact resistance. Sustainability The product Clearflex MP D0 BA ‘Bio attributed’ is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex MP D0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear polyethylene with antioxidants, characterised by a very low density, suitable for injection moulding applications. The production of Clearflex MP D0 BA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex MP D0 BA will be bio circular attributed for 75%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex MP D0 BCA is suitable for injection moulding. Manufacts made by Clearflex MP D0 BCA are characterised by a high flexibility. It is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance. The resin shows an excellent balance between flexibility and impact resistance. Sustainability The product Clearflex MP D0 BCA ‘Bio Circular attributed’ is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex MP D0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear polyethylene with antioxidants, characterised by a very low density, suitable for injection moulding applications. The production of Clearflex MP D0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex MP D0 BCA will be bio circular attributed for 75%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex MP D0 is a linear polyethylene with antioxidants, characterised by a very low density (VLDPE). The resin shows an excellent balance between flexibility and impact resistance. Main Application Clearflex MP D0 is suitable for injection moulding. Manufacts made by Clearflex MP D0 are characterised by a high flexibility. Clearflex MP D0 is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance.

Clearflex MQ B0 BA is suitable for injection moulding. Manufacts made by Clearflex MQ B0 BA are characterised by ahigh flexibility. Clearflex MQ B0 BA is recommended for seals and gaskets, for blend with polyolefins to modifyand improve impact resistance. Sustainability The product Clearflex MQ B0 BA ‘Bio attributed’ is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex MQ B0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear polyethylene with antioxidants, characterised by a very low density, suitable for injection moulding applications. The production of Clearflex MQ B0 BA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex MQ B0 BA will be bio circular attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex MQ B0 BCA is suitable for injection moulding. Manufacts made by Clearflex MQ B0 BCA are characterised by a high flexibility. Clearflex MQ B0 BCA is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance. Sustainability The product Clearflex MQ B0 BCA ‘Bio Circular attributed’ is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex MQ B0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear polyethylene with antioxidants, characterised by a very low density, suitable for injection moulding applications. The production of Clearflex MQ B0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex MQ B0 BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex MQ B0 is a linear polyethylene with antioxidants, characterised by a very low density (VLDPE). The resin shows an excellent balance between flexibility and impact resistance. Main Application Clearflex MQ B0 is suitable for injection moulding. Manufacts made by Clearflex MQ B0 are characterised by a high flexibility. Clearflex MQ B0 is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance.

Clearflex MQ F0 BA is suitable for injection moulding. Manufacts made by Clearflex MQ F0 BA are characterised by a high flexibility. It is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance. The resin shows an excellent balance between flexibility and impact resistance. Sustainability The product Clearflex MQ F0 BA ‘Bio attributed’ is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex MQ F0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear polyethylene with antioxidants, characterised by a very low density, suitable for injection moulding applications. The production of Clearflex MQ F0 BA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex MQ F0 BA will be bio circular attributed for 75%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex MQ F0 BCA is suitable for injection moulding. Manufacts made by Clearflex MQ F0 BCA are characterised by a high flexibility. It is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance. The resin shows an excellent balance between flexibility and impact resistance. Sustainability The product Clearflex MQ F0 BCA ‘Bio Circular attributed’ is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex MQ F0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear polyethylene with antioxidants, characterised by a very low density, suitable for injection moulding applications. The production of Clearflex MQ F0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex MQ F0 BCA will be bio circular attributed for 75%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex MQ F0 is a linear polyethylene with antioxidants, characterised by a very low density (VLDPE). The resin shows an excellent balance between flexibility and impact resistance. Main Application Clearflex MQ F0 is suitable for injection moulding. Manufacts made by Clearflex MQ F0 are characterised by a high flexibility. Clearflex MQ F0 is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance.

- Low modulus film - Excellent compatibility with polypropylene and polyethylene - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a - Complies with EU, No 10/2011 - Consult the regulations for complete details. DFDA-1010 NT 7 Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance toughness of the structure.

- High elasticity with good elastic recovery - Excellent impact strength in blends with polypropylene and polyethylene - Soft touch blend - Complies with EU, No 10/2011 - Complies with U.S. FDA 21 CFR 175.105 DFDB-1085 NT Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance toughness of the structure.

- High elasticity with good elastic recovery - Excellent impact strength in blends with polypropylene and polyethylene - High melt strength - Soft touch blend DFDB-1088 NT Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance melt strength and toughness of the structure.

- High performance sealant layer in flexible packaging - Good optics, low temperature seal initiation and abuse resistance - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) Although this product has been granted Canadian Health Products and Food Branch (HPFB) No Objection Status, it is the responsibility of the end-user to consult HPFB before using this product in a food contact or pharmaceutical packaging application. Some restrictions may apply in Canada on the use of this product. Contact the Canadian Regulatory Specialist for information on specific applications where No Objection Status was granted for this product. DFDB-9042 NT Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer designed to provide blown and cast film products with low temperature sealability, good optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging.

- Low modulus film - Excellent compatibility with polypropylene and polyethylene - Granular form of FLEXOMER DFDA-1010 NT 7 VLDPE Resin - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a - Consult the regulations for complete details. GRSN-1539 NT 7 Very Low Density Polyethylene VLDPE Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance toughness of the structure. Granular form enhances rapid melt blending into polypropylene or polyethylene.

FLEXOMER™ DFDA-1137 NT 7 Very Low Density Polyethylene (VLDPE) Resin is an ethylene copolymer intended for use in molding and extrusion applications where high flexibility is desired. It is especially useful for flexible hose and tube applications as well as for blow molding small, squeezable bottles. It has a high molecular weight and a relatively narrow molecular weight distribution and exhibits excellent low temperature toughness and outstanding flex life characteristics. It is also recommended as a blending component to modify and improve the physical properties of high pressure and linear low density polyethylene resins. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details.

FLEXOMER™ DFDC-1137 NT 7 Very Low-Density Polyethylene (VLDPE) Resin is an ethylene copolymer intended for use in molding and extrusion applications where high flexibility is desired. It is especially useful for fresh produce packaging films, flexible hose and tube applications as well as for blow molding small, squeezable bottles. The resin utilizes a TnPP (Tris(nonylphenyl) phosphite) free additive formulation. It has a high molecular weight and a relatively narrow molecular weight distribution and exhibits excellent low temperature toughness and outstanding flex life characteristics. It is also recommended as a blending component to modify and improve the physical properties of high pressure and linear low density polyethylene resins. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 Consult the regulations for complete details.