ELTEX® PF0101KE is a metallocene polyethylene plastomer resin produced in Europe. Benefits & Features ELTEX® PF0101KE is a polyethylene copolymer containing hexene-1 as comonomer and produced with a metallocene catalyst. It offers the following properties: - Extremely low sealing initiation temperature and excellent Hot Tack strength - Unrivalled impact strength and puncture resistance - Very high gloss and transparency - Good bubble stability and easy extrudability - Excellent blending compatibility with other LLDPE and LDPE grades Applications ELTEX® PF0101KE has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. ELTEX® PF0101KE can be used pure or as a blending partner with other polyolefins. In addition, ELTEX® PF0101KE offers easy extrudability. ELTEX® PF0101KE is formulated with slip and antiblocking agents that offer high slip with easy opening properties. The use of additional antiblocking agents might be required depending on the film structure and thickness. Addition of other polymers, masterbatches and pigments may alter film slip and antiblock performance. We recommend that you consult your INEOS technical representative for further advice on the use of ELTEX® PF0101KE.

ELTEX ® PF0101XA is a metallocene polyethylene plastomer resin produced in Europe. Benefits & Features ELTEX ® PF0101XA is a polyethylene copolymer containing hexene-1 as comonomer and produced with a metallocene catalyst. It offers the following properties: - Extremely low sealing initiation temperature and excellent Hot Tack strength - Unrivalled impact strength and puncture resistance - Very high gloss and transparency - Good bubble stability and extrudability - Excellent blending compatibility with other LLDPE and LDPE grades Applications ELTEX ® PF0101XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. ELTEX ® PF0101XA can be used pure or as a blending partner with other polyolefins. In addition, ELTEX ® PF0101XA offers easy extrudability. ELTEX ® PF0101XA is also recommended as a softening agent in film and non-film compositions requiring softness or flexibility. The very low density and the unique microstructure of ELTEX ® PF0101XA are also valuable as toughness enhancer in various applications. We recommend that you consult your INEOS technical representative for further advice on the use of ELTEX ® PF0101XA.

ELTEX® PF0102XA is a metallocene polyethylene plastomer resin produced in Europe Benefits & Features ELTEX® PF0102XA is a polyethylene copolymer containing hexene-1 as comonomer and produced with a metallocene catalyst. It offers the following properties: - Extremely low sealing initiation temperature and excellent Hot Tack strength - Unrivalled impact strength and puncture resistance - Very high gloss and transparency - Softness and flexibility - Excellent blending compatibility with other polyolefin grades Applications ELTEX® PF0102XA has been developed for use in highly technical blown and cast film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. ELTEX® PF0102XA can be used pure or as a blending partner with other polyolefins. In addition, ELTEX® PF0103XA offers easy extrudability. ELTEX® PF0102XA is also recommended as a softening agent in film and non-film compositions requiring softness or flexibility like compounds for wire and cable applications. The very low density and the unique microstructure of ELTEX® PF0102XA are also valuable as toughness enhancer in various applications, including polypropylene moulding. We recommend that you consult your INEOS technical representative for further advice on the use of ELTEX® PF0102XA.

ELTEX® PF0103XA is a metallocene polyethylene plastomer resin produced in Europe Benefits & Features ELTEX® PF0103XA is a polyethylene copolymer containing hexene-1 as comonomer and produced with a metallocene catalyst. It offers the following properties: - Extremely low sealing initiation temperature and excellent Hot Tack strength - Unrivalled impact strength and puncture resistance - Very high gloss and transparency - Softness and flexibility - Excellent blending compatibility with other polyolefin grades Applications ELTEX® PF0103XA has been developed for use in highly technical blown and cast film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. ELTEX® PF0103XA can be used pure or as a blending partner with other polyolefins. In addition, ELTEX® PF0103XA offers easy extrudability. ELTEX® PF0103XA is also recommended as a softening agent in film and non-film compositions requiring softness or flexibility like compounds for wire and cable applications. The very low density and the unique microstructure of ELTEX® PF0103XA are also valuable as toughness enhancer in various applications, including polypropylene moulding. We recommend that you consult your INEOS technical representative for further advice on the use of ELTEX® PF0103XA.

ELTEX ® PF0601XA is a metallocene polyethylene plastomer resin produced in Europe. Benefits & Features ELTEX ® PF0601XA is a polyethylene copolymer containing hexene-1 as comonomer and produced with a metallocene catalyst. It offers the following properties: - Extremely low sealing initiation temperature and excellent Hot Tack strength - Unrivalled impact strength and puncture resistance - Very high gloss and transparency - Good bubble stability and extrudability - Excellent blending compatibility with other LLDPE and LDPE grades Applications ELTEX ® PF0601XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. ELTEX ® PF0601XA can be used pure or as a blending partner with other polyolefins. In addition, ELTEX ® PF0601XA offers easy extrudability. ELTEX ® PF0601XA is also suitable for the extrusion of soft geomembranes.

This data represents typical values that have been calculated from all products classified as: Generic mPE This information is provided for comparative purposes only.

LUCENE™ SP 980, LG PE-RT(Type I) is a high performance MDPE for hot and cold water pipe. It is developed by using a new LG catalyst technology. It has excellent stress crack resistance properties and Long Term Hydrostatic strength. LUCENE™ SP 980 Polyethylene Resin meets requirements of the FDA regulation 177.1520 and NSF/ANSI Standard 61 (Drinking Water System Components - Health Effect). Applications - Hot & cold drinking water pipe, Floor heating, Radiator connection, Al composite pipe

TPSeal® M3670 is a new generation metallocene Medium Density Polyethylene (mMDPE) with hexene as comonomer. TPSeal® M3670 is intended for the manufacture of rotomoulded items and available in black, in pellets or in powder. It is also available under a natural colour (TPSeal® M3671). Main Characteristics Its specific molecular structure ensures: - Efficient binding with fuel barrier product such as Polyamide - Excellent foaming properties Application - Suitable for monolayer and multi-layer with foam technology. - Fuel tank production, with very low permeability. Structural parts. Water sports application.

TPSeal® M3671 is a new generation metallocene Medium Density Polyethylene (mMDPE) with hexene as comonomer. TPSeal® M3671 is intended for the manufacture of rotomoulded items and available in natural, in pellets or in powder. It is also available under a black colour (TPSeal® M3670). Main Characteristics Its specific molecular structure ensures: - Efficient binding with fuel barrier product such as Polyamide - Excellent foaming properties Application - Suitable for monolayer and multi-layer with foam technology. - Fuel tank production, with very low permeability. Structural parts. Water sports application.

TPSeal ® M2731UV is a Linear Low Density Polyethylene (mLLDPE) with hexene as comonomer. TPSeal ® M2731UV is intended for the manufacture of rotomoulded items and available in natural or in colour, in pellets or in powder. Main Characteristics Its specific molecular structure ensures: - Excellent impact properties - Good dimensional stability - Outstanding ESCR - UV protected Application - Designed for the production of technical part with a complex shape and esthetical requirements

TPSeal ® M4741UV is a new generation metallocene High Density Polyethylene (mHDPE) with hexene as comonomer. TPSeal ® M4741UV is intended for the manufacture of rotomoulded items and available in natural, in pellets or in powder. Main Characteristics Its specific molecular structure ensures: - Superior mechanical properties - Improved dimensional stability - Easy processing - Outstanding ESCR - UV protected Application - Suitable for the production of tanks, underground tanks, kayaks, technical parts.

TPSeal ® PE FOAM 155 is based on a new generation metallocene Polyethylene with hexene as comonomer. TPSeal ® PE FOAM 155 is a natural Specialty Compound, provided under a powder form which contains an additive allowing the product to expand during the rotomolding process. It is suitable for use in Rotational Moulding. Main Characteristics Its specific molecular structure ensures: - Superior mechanical properties - Improved dimensional stability - Easy processing Application - Structural parts. Water sports application.

TPSeal ® PE FOAM 235 is based on a new generation metallocene Polyethylene with hexene as comonomer. TPSeal ® PE FOAM 235 is a natural Specialty Compound, provided under a powder form which contains an additive allowing the product to expand during the rotomolding process. It is suitable for use in Rotational Moulding. Main Characteristics Its specific molecular structure ensures: - Superior mechanical properties - Improved dimensional stability - Easy processing Application - Structureal parts. Water sports application.

TPSeal® PE FR02 is an intumescent halogen-free flame-retardant Specialty Compound and is based on metallocene Polyethylene (PE). TPSeal® PE FR02 is intended for the manufacture of rotomoulded items and available in natural white, in pellets or in powder. Main Characteristics Its specific molecular structure ensures: - Suitable for multi-layer application - Flame-retardant properties thanks to halogen-free technology. Application - Stuctural parts, design (furniture), building parts, ...