ICORENE® N2100 is a low density polyethylene resin designed for the production of medium/high voltage power cable insulation, blown film extrusion. This grade is characterized by a good balance between processability, mechanical and optical properties.

ICORENE® N2102 is a low density polyethylene resin designed for injection moulding, compound and masterbatch applications. This grade is characterized by good toughness, stiffness and processability.

ICORENE® N2103 is a low density polyethylene resin suitable for general purposes. This grade is characterized by good toughness, stiffness and processability. It is succesfully used for domestic houseware or food containers.

ICORENE® N2104 is a low density polyethylene resin suitable for general purposes. This grade is characterized by good toughness, stiffness and processability. It is succesfully used for injection moulding, compound and masterbatch applications.

ICORENE® N2105 is a low density polyethylene resin suitable for general purposes. It is characterized by good toughness and flexibility. This grade is succesfully used for compound and masterbatch applications due to its excellent fluidity.

ICORENE® N2106 is an easy flowing low density polyethylene grade with medium stiffness and good toughness. This grade is suitable for use in masterbatch applications.

ICORENE® N2110 is a low density polyethylene grade free from additives. This grade is suitable for use in masterbatch applications.

ICORENE® N2110 is a low density polyethylene grade free from additives. This grade is suitable for use in masterbatch applications.

ICORENE® N2140 is a low density polyethylene resin with an excellent fluidity. This grade is used for compound and masterbatch applications.

ICORENE® N2170 is a low density polyethylene resin with an excellent fluidity. It can be succesfully added to low flowing LDPE grades to improve their processability. This grade is also used for compound and masterbatch applications.

ICORENE® N2215 is a low density polyethylene resin with a high flow and very good flexibility. This grade is mainly used for compound and masterbatch applications.

ICORENE® N2220 is a low density polyethylene resin with a high flow and very good flexibility. This grade is mainly used for compound and masterbatch applications.

ICORENE® N2231 is a low density polyethylene based compounded resin blend which contains additives to reduce the level of expected warpage across the carpet. This grade is used for special applications, in particular as carpet backing powder.

ICORENE® N7020 is a low density polyethylene resin designed for wire coating applications with fluidised bed processing. This grade has excellent fluidity and is available in white and a range of other colours.

Additive free LDPE homopolymer extrusion coating Benefits & Features 17L430 special polymer structure gives the following properties: - low speed grade with a very stable and low Neck In - improving the melt curtain stability in blends or coextrusion Applications Extrusion coating and laminating grade designed with an outstanding low Neck In. As blending partner with other polymers the 17L430 improves the melt curtain stability and reduces the Neck In.

Additive free LDPE homopolymer extrusion coating Benefits & Features 17L430B special polymer structure gives the following properties: - low speed grade with a very stable and low Neck In - improving the melt curtain stability in blends or coextrusion Applications Extrusion coating and laminating grade designed with an outstanding low Neck In. As blending partner with other polymers the 17L430B improves the melt curtain stability and reduces the Neck In.

Additive free LDPE homopolymer extrusion coating, injection moulding and compounding product Benefits & Features 18R430 special polymer structure gives the following properties: For extrusion coating: - Well balanced Neck In and Draw Down performance - Good adhesion performance and sealing properties - Excellent substrate wettability For injection moulding and compounding: - Excellent flexibility - Good transparency - Absence of any kind of additive allowing tailor formulation of specific compounds and master-batches Applications Extrusion coating and laminating grade designed for a medium to high coating line speed. 18R430 is also suitable for injection moulding of flexible products (caps and closures, food containers, soft tubes, technical parts) as well as for the production of compounds.

Additive free LDPE homopolymer extrusion coating, injection moulding and compounding product Benefits & Features 19N430 special polymer structure gives the following properties: For extrusion coating: - Well balanced Neck In and Draw Down performance - Good adhesion performance and sealing properties For injection moulding and compounding: - Excellent flexibility - Good transparency - Absence of any kind of additive allowing tailor formulation of specific compounds and master-batches Applications Extrusion coating and laminating grade designed for a medium to high coating line speed. 19N430 is also suitable for injection moulding of flexible products (caps and closures, food containers, soft tubes, technical parts) as well as for the production of compounds.

Additive free LDPE homopolymer extrusion coating, injection moulding and compounding product Benefits & Features 19N430B special polymer structure gives the following properties: For extrusion coating: - Well balanced Neck In and Draw Down performance - Good adhesion performance and sealing properties For injection moulding and compounding: - Excellent flexibility - Good transparency - Absence of any kind of additive allowing tailor formulation of specific compounds and master-batches Applications Extrusion coating and laminating grade designed for a medium to high coating line speed. 19N430B is also suitable for injection moulding of flexible products (caps and closures, food containers, soft tubes, technical parts) as well as for the production of compounds.

19N930 is a low-density polyethylene intended for injection molding. It is a medium MFR material, having good flow properties and allowing short cycle time. The moulded article is characterized by low degree of built-in stress, good stiffness, low warpage and high gloss. Applications: 19N930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for products like caps and closures, household goods and toys.

Additive free LDPE homopolymer extrusion coating, injection moulding and compounding product Benefits & Features 20N430 special polymer structure gives the following properties: For extrusion coating: - Well balanced Neck In and Draw Down performance - Good adhesion performance and sealing properties For injection moulding and compounding: - Excellent flexibility - Good transparency - Absence of any kind of additive allowing tailor formulation of specific compounds and master-batches Applications Extrusion coating and laminating grade designed for a medium to high coating line speed. 20N430 is also suitable for injection moulding of flexible products (caps and closures, food containers, soft tubes, technical parts) as well as for the production of compounds.

LDPE for Injection moulding and compounding. Benefits & Features 20T930 is a low-density polyethylene intended for injection moulding or for the production of compounds and master-batches. It is a high MFR material, having good flow properties and allowing short cycle time and good additives and pigments dispersion. The moulded article is characterised by low degree of built-in stress, good stiffness and high gloss. Applications 20T930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys. It is also recommended for the manufacturing of highly filled compounds.

LDPE for Blown film Applications - 21D430 is particularly suitable for heavy duty film applications such as sacks, pallet shrink wrap and agricultural film. Characteristics 21D430 is an easily extrudable LDPE homopolymer. It offers the following properties: - very high impact strength - excellent bubble stability - low slip film If corona treatment is necessary, the level should normally be in the range 38-48N/m.

LDPE for Blown film 22D730 is an autoclave, low density polyethylene grade for film application. 22D730 is developed to give an extra strong film for heavy duty film applications such as sacks and pallet shrink. Applications 22D730 is intended for applications such as - Heavy duty bags - Shrink films - Liners - Construction and agricultural films

LDPE for Blown film 22G564 is an autoclave, low density polyethylene grade developed to give strong film for medium duty applications. Applications 22G564 is intended for applications such as - Carrier-bag films - Pouches refuse sacks - General packaging film

LDPE for Blown film 22H594 is an autoclave, low density polyethylene grade for the production of thin blown films. Applications 22H594 is intended for applications such as - Thin shrink film - General packaging film

Applications 23H430 is suitable for a variety of general-purpose packaging films, liners, carrier bags and fine shrink film. It is also recommended for cross-linked foam as well as for blow-moulding applications. Benefits and Features 23H430 is an autoclave LDPE homopolymer. It offers the following properties: - Good strength and dart drop resistance - Good drawdown - Low tendency to block If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.

Additive free LDPE homopolymer extrusion coating and injection moulding product Benefits & Features 23L430 special polymer structure gives the following properties: - Excellent draw down ability with adequate neck-in and stable edges - Good process ability also at high line speeds and/or low coating weights - Low fumes during extrusion - Good adhesion on many substrates - Good heat sealing properties - Good organoleptical properties - Low permeability to moisture and gases - Good scratch resistance - High purity and very low gel level Applications 23L430 is a low density polyethylene homopolymer for general coating applications. 23L430 coated substrates such as paper, board and aluminium can be used for packaging food and liquids, powders, medical devices, agricultural materials, chemicals and many other products.

Additive free LDPE homopolymer extrusion coating and injection moulding product Benefits & Features 23L430B special polymer structure gives the following properties: - Excellent draw down ability with adequate neck-in and stable edges - Good process ability also at high line speeds and/or low coating weights - Low fumes during extrusion - Good adhesion on many substrates - Good heat sealing properties - Good organoleptical properties - Low permeability to moisture and gases - Good scratch resistance - High purity and very low gel level Applications 23L430B is a low density polyethylene homopolymer for general coating applications. 23L430B coated substrates such as paper, board and aluminium can be used for packaging food and liquids, powders, medical devices, agricultural materials, chemicals and many other products.

23T930 is a low-density polyethylene intended for injection rnoulding. It is a high MFR material, having good flow properties and allowing short cycle tirne. The rnoulded article is characterised by low degree of built-in stress, good stiffness and high gloss. Applications: 23T930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys.

24W930 is a low-density polyethylene intended for injection rnoulding and compounding. It is a high MFR material, having good flow properties and allowing short cycle tirne. The moulded article is characterised by low degree of built-in stress, good stiffness and high gloss. 24W930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys. It is also recommended for the manufacturing of highly filled compounds.

LDPE ionomer for film products Benefits & Features M21E730 is an ionomer, produced by the neutralization of an ethylene methacrylic acid (MAA) copolymer. It offers the following properties: - Very high impact strength - Exceptional drawdown - Very low resistance to tear propagation in both machine and transverse directions - Good optical properties Applications M21E730 has been developed for easy tear film applications such as collation shrink film, envelopes, overwrap and bags. It can be blended or co-extruded with other types of polyethylene to tailor performance.

M21G764 are particularly suitable for mono and co-extrusion applications such as deep freeze, form fill seal film in general and thin bags. In blends and co-extrusions, they can be used to boost the impact strength of LLDPE, LDPE and recycled polyethylene. M21G764 are ionomers, produced by neutralisation of an ethylene - methacrylic acid copolymer. M21G764 contains only antiblock. They offer the following properties: - Very high impact strength at ambient and low temperatures - Exceptional drawdown M 21 G 764 can be added if a lower slip level is required or used pure for low slip films. Addition of other polymers, masterbatches and pigments, or use of other thicknesses may alter film slip and antiblock performance. If corona treatment is necessary, the level should normally be in the range 38-48 mN/m. We recommend that you consult your INEOS technical representative for further advice on the use of M21G764.

BP28D780 is a low density polyethylene compound suitable for the thin walled insulation of telephone wires. Benefits and Features: BP28D780 combines good processability at very high extrusion speeds with excellent mechanical properties, a high resistance to copper catalysed thermal oxidation and excellent resistance to petroleum jelly absorption. The combination of these properties in BP28D780 makes it suitable for use as telephone singles insulation in air spaced and filled cables and in environments subject to high temperatures. BP28D780 contains a metal deactivator.

BPD2000 is an unstabilised and clean low density polyethylene. Applications BPD2000 is designed for use in Medium voltage (MV) power cables insulation using the Direct Peroxide Injection (DPI) process. For insulation of cables of higher voltage, it is recommended to use our grade BPD2000E, please refer to corresponding datasheet.

BPD2000E is an unstabilised and clean low density polyethylene. Applications BPD2000E is designed for use in Medium/High Voltage (MV/HV) power cables insulation using the direct peroxide injection (DPI) process and applications requesting extra cleanliness. Suitability of BPD2000E for insulation of HV cables and voltage limitation depend on experience acquired and validations undergone by the cable manufacturer.

BPD 2070 is an unstabilised low density thermoplastic polyethylene. It is designed for use in medium voltage power cable one step silane crosslink insulation. BPD 2070 shows good electrical properties and good cleanliness. Provided suitable antioxidant is added by the user and proper processing conditions are adopted, BPD 2070 can be used as the base resin for a thermoplastic high voltage insulation compound. Adequate filtering might be necessary for this high voltage application.

BPD 2142 is an unstabilised low density polyethylene. This material, when compounded with suitable additives, is designed for use in silane crosslinking processes. Its melt flow rate allows it to be processed with the two main silane technologies: Monosil (one-step process) and Sioplas (two-step process). It has been developed for insulation of power cables up to 5 kV.

BPD2167 is an unstabilised low density thermoplastic polyethylene. It is designed for use in "Câble de façade" application and one step silane crosslinking insulation. A carefully selected carbon black and additives master batch needs to be added to BPD2167 to reach the final "Cable de Façade" formulation. The best performance in terms of homogeneity, aging and anchorage tests is however obtained with the fully formulated black compound BPD8167, to which only the Silane mixture needs to be added.

BPD 8063 is a low density polyethylene compound having low dielectric loss properties meeting the needs of many coaxial and control cable applications. It contains a non staining antioxidant.