聚乙烯 (PE): MDPE
产品 | 可用性 | 产品说明 |
---|---|---|
ICORENE® 3855 | 欧洲 |
ICORENE® 3855 is a hexene medium density polyethylene with outstanding processability, specifically developed for rotational moulding.
This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.
|
ICORENE® 5704 | 欧洲 |
ICORENE® 5704 is a metallocene medium density polyethylene specifically developed for rotational moulding.
This grade is a suitable grade for use in kayaks and boats applications. It has a good balance of properties such as toughness easy flow and stiffness.
|
INEOS HDPE K38-20-160 | 北美洲 |
K38-20-160 is a yellow, UV-stabilized medium density polyethylene copolymer, containing an organic pigment system, designed specifically for natural gas pipe and fittings. Exhibiting excellent long term strength and slow crack growth resistance, K38-20-160 is listed by the Plastics Pipe Institute (in PPI TR-4) as a PE2708 and is certified to the material requirements of ASTM D2513 and CSA B137.4.
|
INEOS HDPE K38-20-188 | 北美洲 |
K38-20-188 is a natural, UV-stabilized medium density polyethylene pipe and tubing resin designed for natural gas distribution. When blended with an approved INEOS yellow masterbatch, the resulting formulation, known as K38-20-160, is recognized by the Plastics Pipe Institute as a PE2708 resin which exhibits excellent long term strength and outstanding environmental stress crack resistance and is certified to the material requirements of ASTM D2513 and CSA B137.4.
|
Kemcor LD 1333 | 北美洲 |
Cables using LD 1333 and manufactured under sound commercial fabrication conditions meet the following specifications:
AS 1049-1986 Type 03S
ASTM D1248, II A5, Grade E5
REA PE200, Appendix A
US Federal LP-390C II-L, Grade III, Category 5
US Western Electric Co. MS 58411
BS 6234-1987 Type 03
|
Kemcor MD 0898 | 北美洲 |
This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992).
This product has been designed to meet the requirements for PE 80 Type B compounds under AS 4131, and is intended to be used in pipes conforming to AS 4130.
|
Kemcor MD 600 | 北美洲 | |
Kemcor MDX 598 | 北美洲 |
This product has been designed to meet the requirements for PE 80 Type B compounds under AS 4131, and is intended to be used in pipes conforming to AS 4130.
This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992).
|
Kemcor MDX 599 | 北美洲 |
This product has been designed to meet the requirements for PE 80 Type B compounds under AS 4131, and is intended to be used in pipes conforming to AS 4130.
This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992).
|
KMI PE 293-TR | 北美洲 |
This high performance medium density polyethylene is an ethylene-hexene copolymer that is tailored for demanding pressure pipe applications that require:
- Good long-term hoop strength
- UV stabilizer for good outdoor storage life
- Outstanding resistance to slow-crack growth
Typical applications for KM 293-TR include:
- Energy piping systems
- Oil field pipe
- Industrial pipe
When blended with an approved yellow concentrate, this material meets or exceeds:
- ASTM D4976 - PE 225
- NSF 3 rd party D2513 certified
- ASTM D3350, Cell Class PE234373E and PE234375E
- PPI designations PE 2708 and PE 80
- CSA approved for natural gas
|
KMI PE KM-A632sPF | 北美洲 |
KM-A632sPF is an Octene Copolymer sMDPE resin used for applications such as cast film, co-extrusion and lamination. This grade contains an enhanced processing antioxidant. KM-A632sPF exhibits excellent tensile and elongation properties, good optical properties and low gel.
|
KMI PE KM-U0470-RT | 北美洲 |
KM-U0470-RT is a hexane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows good impact properties and excellent processability.
Applications:
Lightweight Parts, toys, complex custom parts, home and gardening items, mailboxes
|
KMI PE KM-U-143sMR | 北美洲 |
KM-U-143sMR is an octane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows exceptional low temperature impact properties, low viscosity, and easy mold release.
Applications:
Recreational and leisure equipment, containers, septic tanks, and fish boxes
|
Lotrène® MDPE Q 3802 | 非洲和中东 |
This natural high molecular weight hexene copolymer provides:
- Excellent processability
- Exceptional melt strength
- Excellent stress cracking resistance
Typical applications include:
- PE 80 pressure pipe & fitting described in ISO standards, such as ISO 4427
- PE - Al - PE composite pipe and geomembrane
This resin meets these specifications:
- FDA Regulation 21CFR 177.1520. Suitable for food packaging
- Listed in PPI’s TR - 4 as a PE 80 material
|
Lotrène® MDPE Q K307 | 非洲和中东 |
This medium density, high molecular weight, hexene copolymer is tailored for geomembrane applications that require:
- Outstanding ESCR
- Broad fusion range
- Excellent melt strength
- Good processability
Typical applications include:
- Landfill liners
- Gasoline and chemical tank containment liners
- Tunnel moisture barriers
- Mine tailing collection projects
This resin meets these specifications:
- ASTM D4976 – PE225
- GRI-GM13 except carbon black requirements
- FDA 21 CFR 177.1520(c) 3.1a, use conditions C through G per 21 CFR 176.170(c). Volume of food contacting article must be equal to or greater than 5 gallons.
|
Lotrène® MDPE Q TR-131 | 非洲和中东 |
This high molecular weight hexene copolymer provide:
- Excellent overall balance of toughness
- Good impact strength and tear properties
It is ideal for fabricating into:
- Produce bags
- Shopping bags
- Trash bags
This resin meets these specifications:
- FDA Regulation 21CFR 177.1520. Suitable for food packaging.
- Suitable for food packaging
|
Lotrène® MDPE Q TR-400 | 非洲和中东 |
This high molecular weight, hexene copolymer is tailored for geomembrane and pressure pipe application that require:
- Outstanding ESCR
- Excellent melt strength
- Good processability
- Broad fusion range
Typical applications for HHM TR400- include:
- Smooth and textured geomebrane
- Pressure Pipe
This resin meets these specifications:
- FDA Regulation 21CFR 177.1520
- ASTM D4976 - PE 225
|
LUBAN™ DNDC-7150 | 非洲和中东 |
Luban DNDC-7150 Medium Density Polyethylene (MDPE) grade is a hexene copolymer with narrow molecular weight distribution. This grade is intended for use in rotational molding applications such as outdoor storage containers. The grade is UV stabilized.
Application
Roto-molded loft tanks (water), agriculture tanks, industrials pallets, trash containers, chemical shipping drums, water park slides
|
LUBAN™ DNDC-7152 | 非洲和中东 |
Luban DNDC-7152 Medium Density Polyethylene (MDPE) grade is a hexene copolymer with narrow molecular weight distribution. This grade is intended for use in rotational molding applications such as indoor storage containers.
Application
Roto-molded loft tanks (water), agriculture tanks, industrials pallets, trash containers, chemical shipping drums, water park slides
|
Luflexen hyPE 35P FA | 欧洲 |
Luflexen hyPE 35P FA is a high performance, linear polyethylene grade with medium density and hexene as comonomer. This product combines outstanding impact resistance with an excellent stiffness and offers good processability in a broad processing window. LyondellBasell customers report that Luflexen hyPE 35P FA is used in high performance films where high strength and puncture resistance is required. It contains antioxidants and is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
|
Lupolen 3621 M RM | 非洲和中东 |
Lupolen 3621 M RM is a new generation hexene linear medium-density polyethylene for rotational molding. Typical customer applications include agricultural and chemical storage containers, technical parts and automotive parts. This product exhibits excellent ESCR and high impact strength at low temperatures. Lupolen 3621 M RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.**
It is not intended for use in medical and pharmaceutical applications.
** Resistance is based on our latest patented technology
|
Lupolen 3721C | 欧洲 |
Lupolen 3721 C is a medium density polyethylene with hexene as comonomer.
It exhibits a good processability and is used in stiff films and as blending component for LDPE.
It contains antioxidants and is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
|
Lupolen 4021 K RM | 非洲和中东 |
Lupolen 4021 K RM is a new generation hexene linear medium-density polyethylene for rotomolding. Typical customer applications include large tanks including agricultural and chemical storage containers and underground and infrastructure applications.
Lupolen 4021 K RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.**
It is not intended for use in medical and pharmaceutical applications.
** Resistance is based on our latest patented technology
|
Lupolen GX 5007 | 非洲和中东 |
Lupolen GX 5007 is a new generation hexene linear medium density polyethylene for rotational molding. Lupolen GX 5007 is a fully UV-stabilized and pelletized polymer. It is not intended for use in medical and pharmaceutical applications.
|
Marlex® HHM TR-130 | 北美洲 |
This medium density polyethylene is an ethylene-hexene copolymer and is tailored for blown film applications that require:
- Good stiffness
- Excellent toughness
- Blending with LLDPE and LDPE
- Superior bubble stability
Typical blown film applications include:
- Retail bags
- Industrial liners
- Mailer bags
- Blend component
|
Marlex® HHM TR-131 | 非洲和中东 |
This medium density polyethylene is an ethylene-hexene copolymer and is tailored for blown film applications that require:
- Soft feel
- Good toughness, impact strength and tear resistance
- Good blending characteristics with HDPE HMW resins
Typical applications for HHM TR-131 include:
- T-shirt bags
- Shopping bags
- Trash bags
This resin meets these specifications:
- FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per Table 2 of 21 CFR 176.170(c)
- ASTM D4976 – PE 225
- (EU) No. 10/2011
|
Marlex® HHM TR-392 | 北美洲 |
This high performance medium density polyethylene is an ethylene-hexene copolymer that is tailored for demanding applications that require:
- Excellent tensile elongation properties
- Outstanding resistance to slow-crack growth
- Very good thermal stability
Typical applications for HHM TR-392 include:
- Irrigation tubing and/or tape
This resin meets these specifications:
- ASTM D4976 - PE 225
- ASTM D3350, Cell Class PE234320E
|
Marlex® HHM TR-418Q | 北美洲 |
This high performance medium density polyethylene is an ethylene-hexene copolymer that is tailored for demanding pressure pipe applications that require:
- Good long-term hoop strength
- UV stabilizer for good outdoor storage life
- Outstanding resistance to slow-crack growth
Typical applications for HHM TR-418Q include:
- Energy piping systems
- Oil field pipe
- Industrial pipe
When blended with an approved yellow concentrate, this material meets or exceeds:
- ASTM D4976 - PE 225
- NSF 3 rd party D2513 certified
- ASTM D3350, Cell Class PE234373E and PE234375E
- PPI designations PE 2708 and PE 80
- CSA approved for natural gas
|
Marlex® HMN TR-935 | 北美洲 |
This medium density polyethylene resin is an ethylene-hexene copolymer tailored for rotational molding applications that require:
- Wide process windows
- Excellent impact strength
- Good flow
- Excellent ESCR
- Durability
This resin is available in two physical forms:
- Pellet form - HMN TR-935
- 35 US mesh powder - HMN TR-935G
Typical applications for HMN TR-935 and HMN TR-935G include:
- Recreational and agricultural equipment
- Toys and carts
This resin meets these specifications:
- ASTM D4976 - PE 223
- FDA 21 CFR 177.1520(c) 3.2a, - Use conditions B through H per 21 CFR 176.170(c) Table 2 for single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the finished articles are to have a volume of at least 18.9 liters (5 gallons).
- NSF / ANSI Standard 61 for potable water (CLD 23)
- NSF / ANSI Standard 51 for any food contact (MTU 100 °C)
- UL94HB yellow card per UL file E349283
- UL746C (f1) yellow card per UL file E349283
- FMVSS.302 burn test
- AS/NZS 4020:2005 (contact with drinking water)
- Long term UV stabilization - ASTM 2565 (Cycle 1): Greater than UV-16
|
Marlex® HMN TR-938 | 北美洲 |
This medium density polyethylene resin is an ethylene-hexene copolymer tailored for rotational molding applications that require:
- Wide process window
- Excellent impact strength
- Good flow
- Excellent ESCR
This resin is available in two physical forms:
- Pellet form - HMN TR-938
- 35 US mesh powder - HMN TR-938G
Typical applications for HMN TR-938 and HMN TR-938G include:
- Industrial waste containers and tanks
- Marine equipment
- Industrial tanks
This resin meets these specifications:
- ASTM D4976 - PE 223
- FDA 21 CFR 177.1520(c) 3.2a, - Use conditions B through H per 21 CFR 176.170(c) Table 2 for single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the finished articles are to have a volume of at least 18.9 liters (5 gallons).
- UL94HB yellow card per UL file E349283
- UL746C (f1) yellow card per UL file E349283
- FMVSS.302 burn test
- AS/NZS 4020:2005 (contact with drinking water)
- NSF / ANSI Standard 61 for potable water (CLD 23)
- AS/NZS 4766 (polyethylene water and chemical tanks) 4
- Long term UV stabilization - ASTM 2565 (Cycle 1): Greater than UV-16
|
Marlex® HMN TR-938G | 北美洲 |
This medium density polyethylene resin is an ethylene-hexene copolymer tailored for rotational molding applications that require:
- Wide process window
- Excellent impact strength
- Good flow
- Excellent ESCR
This resin is available in two physical forms:
- Pellet form - HMN TR-938
- 35 US mesh powder - HMN TR-938G
Typical applications for HMN TR-938 and HMN TR-938G include:
- Industrial waste containers and tanks
- Marine equipment
- Industrial tanks
This resin meets these specifications:
- ASTM D4976 - PE 223
- FDA 21 CFR 177.1520(c) 3.2a, - Use conditions B through H per 21 CFR 176.170(c) Table 2 for single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII. Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1. When contacting fatty foods of Types III, IV-A, V, VII-A, and IX described in Table 1, the finished articles are to have a volume of at least 18.9 liters (5 gallons).
- UL94HB yellow card per UL file E349283
- UL746C (f1) yellow card per UL file E349283
- FMVSS.302 burn test
- AS/NZS 4020:2005 (contact with drinking water)
- NSF / ANSI Standard 61 for potable water (CLD 23)
- AS/NZS 4766 (polyethylene water and chemical tanks) 4
- Long term UV stabilization - ASTM 2565 (Cycle 1): Greater than UV-16
|
Marlex® K306 | 北美洲 |
This medium density, high molecular weight hexene copolymer is tailored for geomembrane applications that require:
- Outstanding ESCR
- Broad fusion range
- Excellent melt strength
- Good processability
Typical geomembrane applications for K306 include:
- Landfill liners
- Gasoline and chemical tank containment liners
- Tunnel moisture barriers
- Mine tailing collection projects
This resin meets these specifications:
- ASTM D4976 - PE 225
- GRI-GM13 except carbon black requirements
- FDA 21 CFR 177.1520(c) 3.1a, use conditions C through G per 21 CFR 176.170(c). Volume of food contacting article must be equal to or greater than 5 gallons.
|
Marlex® K307 | 北美洲 |
This medium density, high molecular weight hexene copolymer is tailored for geomembrane applications that require:
- Outstanding ESCR
- Broad fusion range
- Excellent melt strength
- Good processability
Typical geomembrane applications for K307 include:
- Landfill liners
- Gasoline and chemical tank containment liners
- Tunnel moisture barriers
- Mine tailing collection projects
This resin meets these specifications:
- ASTM D4976 - PE 225
- GRI-GM13 except carbon black requirements
- FDA 21 CFR 177.1520(c) 3.1a, use conditions C through G per 21 CFR 176.170(c). Volume of food contacting article must be equal to or greater than 5 gallons.
|
Marlex® M358Y3 | 北美洲 |
This yellow masterbatch with its medium density polyethylene carrier resin has been formulated for pipe applications that require:
- High visibility as gas piping
- Good outdoor storage life when blended with natural MDPE containing UV stabilizer
- Good long-term hoop strength
Let-down Guidelines
- Add M358Y3 to the base pipe resin at a 49:1 let-down ratio.
|
Moharamplast MDPE MP3840U | 非洲和中东 |
A medium density polyethylene (MDPE) powder compound designed to provide excellent stress crack resistance, better mechanical properties with high rigidity, toughness, gloss and very low warpage. Antioxidants and UV stabilizers are added to ensure protection against degradation by heat or UV irradiation.
Safety
MDPE MP3840U is classified as no-dangerous material.
We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet.
Typical Applications
MDPE MP3840U has been designed for rotational molding applications as large industrial and agricultural tanks, trash containers, chemical shipping drums and also suitable for injection molding applications such as screw closures, caps and housewares.
|
Moharamplast MDPE MP3990U | 非洲和中东 |
A medium density polyethylene (MDPE) powder compound designed to provide excellent stress crack resistance, better mechanical properties with high rigidity, toughness, gloss and very low warpage. Antioxidants and UV stabilizers are added to ensure protection against degradation by heat or UV irradiation.
Safety
MDPE MP3990U is classified as no-dangerous material.
We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet.
Typical Applications
MDPE MP3990U has been designed for rotational molding applications as large industrial and agricultural tanks, trash containers, chemical shipping drums and also suitable for injection molding applications such as screw closures, caps and housewares.
|
Moharamplast MDPE MP-IRR 3810 | 非洲和中东 |
A medium density polyethylene (MDPE) compound designed to provide excellent corrosion resistance, chemical resistance, abrasion resistance, stiffness and environmental stress crack resistance (ESCR).
It is UV stabilized, protected from oxidation, microorganisms and fungi attack and has Low temperature resistance so remains intact and undamaged even after freezing.
Safety
MP-IRR 3810 is classified as no-dangerous material.
We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet.
Typical Applications
MP-IRR3810 is resistant to saline water, acids and alkaline solutions (excluding highly concentrated solutions) so mainly used in agricultural irrigation systems, water delivery systems, sprinkler and micro-sprinkler stands, assembly dripper sets and automation application.
|
NEFTEKHIM PE 4133Q (33403) | 欧洲 |
Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts.
Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant.
Application: rigid flat-slot film; film for diaper manufacturing
|
NEFTEKHIM PE 4435S (35405) | 欧洲 |
Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts.
Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant.
Application: standard grade for the rotational moulding of general purpose products
|
NEFTEKHIM PE 4436S (35405) | 欧洲 |
Product obtained by gas-phase copolymerization of ethylene with butene-1 in presence of complex metalorganic catalysts.
Stabilization recipe: antacid, antioxydant, heat stabilizer, UV stabilizer, dispersant.
Application: standard grade for the rotational moulding of industrial use products
|