聚乙烯 (PE): Braskem PE
产品 | 可用性 | 产品说明 |
---|---|---|
Braskem PE HDF1050XP | 北美洲 |
HDF1050XP is a high molecular weight high density polyethylene copolymer with broad bimodal weight distribution developed for the blown film segment. Films made with this resin offer high stiffness, good heat sealing response and resistance to trait propagation.
Applications:
Very thin film on high-speed line, low caliber. Pipes.
Process:
Blown Film Extrusion
|
Braskem PE HDG0739 | 北美洲 |
HDG0739 is a high molecular weight high density polyethylene copolymer with broad bimodal weight distribution developed for Geomembrane segment.
Applications:
Greenhouse film.
Process:
Blown Film Extrusion
|
Braskem PE HDI0453U1 | 北美洲 |
HDI0453U1 is a high density polyethylene with a narrow molecular weight distribution, developed for injection molding segment. Parts made from this material exhibit a shiny surface and good impact strength and stiffness. This resin has UV stabilizers.
Applications:
Containers and buckets.
Process:
Injection Molding
|
Braskem PE HDI0653U1 | 北美洲 |
HDI0653U1 is a high density polyethylene with a narrow molecular weight distribution, developed for injection molding segment. Parts manufactured from this material exhibit an excellent finishing, good impact resistance, stiffness and excellent tone. This resin has UV lightstabilizing additives.
Applications:
Containers, buckets.
Process:
Injection Molding
|
Braskem PE HDI0661U1 | 北美洲 |
HDI0661U1 is a high density polyethylene with a narrow molecular weight distribution, developed for injection molding segment. Parts made from this material exhibit a shiny surface and good impact strength and stiffness. This resin has UV stabilizers.
Applications:
Trays, containers, pallets, boxes, pails and buckets
Process:
Injection Molding
|
Braskem PE HDI0861U1 | 北美洲 |
HDI0861U1 resin is a high density polyethylene with a narrow molecular weight distribution, developed for injection molding. Parts manufactured from this material exhibit an excellent surface finishing, good impact resistance and stiffness. This resin contains UV stabilizing additives.
Applications:
Trays, plastic containers, boxes.
Process:
Injection Molding.
|
Braskem PE HDI2061 | 北美洲 |
HDI2061 is a High Density Polyethylene for Injection Molding Segment. By having good fluidity provides excellent processability, which promotes high productivity combined with good stiffness and hardness. The narrow molecular weight distribution gives low tendency to deformation. This resin complies with ANSI/NSF Standard 61 and ANSI/NSF Standard 51. The benefit of having both certifications makes this resin ideal for fittings that require direct contact with food and/or potable water.
Applications:
Medium to thin wall items, toys, large caps, household containers, caps.
Process:
Injection Molding.
|
Braskem PE HDI4553 | 北美洲 |
HDI4553 is a high-flow, high density polyethylene intended for injection molding of thin wall containers. This material will allow for cycle time reduction while still imparting reasonable impact strength.
Applications:
Thin wall applications. Cultured dairy containers, margarine tubs and containers for frozen products.
Process:
Injection Molding.
|
Braskem PE HDP0353 | 北美洲 |
HDP0353 is a high density polyethylene copolymer developed for solid wall and corrugated piping applications. Industrial Standard Compliance ASTM D3350: Cell Classification PE 435620A. The resin HDP0353 meet the material requirements specifications ASTM F2160. This resin is recommended for use in applications that are required to meet AASHTO M294 specifications.
Applications:
Natural bimodal high density polyethylene copolymer , resin designed for solid wall and corrugated pipes of small and large diameter, and telecommunications conduits.
Process:
Pipes extrusion.
|
Braskem PE HDP3049LS | 北美洲 |
HDP3049LS is a natural bimodal high-density polyethylene copolymer designed for the extrusion of pipe for potable water, natural gas, industrial and mining sectors.
Resin not yet certified by the Plastic Pipe Institute (PPI) as PE100 and PE4710, NSF/ANSI Standard 14, Standard 61, Standard 372.
resin complies with the requirements of regulation NMX-E-018-CNCP-2012
Applications:
Potable water, natural gas, Industrial and Mining Pipe.
Process:
Pipe Extrusion.
|
Braskem PE HDS0255 | 北美洲 |
HDS0255 is a high density polyethylene copolymer developed for shrink film and blow molding applications. This product is recommended for use in applications that require a combination of high top load strength and good environmental stress crack resistance (ESCR).
Applications:
Shrink film. Household containers, containers for the Chemical Industry (HIC) and for Pharmaceutical and Cosmetics Industry.
Process:
Shrink film. Blow Molding.
|
Braskem PE HE150 | 拉丁美洲 |
HE150 resin is a High Density Polyethylene that has been specially designed for monofilament extrusion process and provides a good balance of processability, spinnability, knotting strength as well as a very low gels amount. It can also be blended with LLDPE to improve blown film stiffness.
Applications:
Blends with LLDPE, Film, Oriented Structures, Raschel, Ropes, Shading nets
Process:
Extrusion of Monofilaments
|
Braskem PE HF0131XP | 拉丁美洲 |
The HF0131XP is a linear low density polyethylene that shows an excellent processability and mate finish.
Additive:
Antioxidants
Lubricant
|
Braskem PE HF2007 | 拉丁美洲 |
HF2007 is a Linear Low Density Polyethylene developed for blown film extrusion. Films obtained with this product show high impact and puncture resistance. It contains processing aid and antioxidant additives.
|
Braskem PE HF2207B5 | 拉丁美洲 |
The HF2207B5 resin is a linear low density polyethylene recommended for blown film extrusion. Have high impact and puncture resistance, high coefficient of friction (COF) and high weld rupture resistance.
Additive:
Antioxidant
Processing aid
Anti-blocking
Application:
Bags with valve, Blends with HDPE, Blends with LDPE, Laminates
|
Braskem PE HF2208S3 | 拉丁美洲 |
The HF2208S3 resin is a linear low density polyethylene, developed for blown film extrusion with good mechanical properties.
Additive:
Antioxidant
Slip
Anti-blocking
Processing Aid
Applications:
Coextrusion, General use films, High performance films, Packing for liquid products, Packing for solid products, Technical films for automatic packaging
|
Braskem PE HF3712 | 拉丁美洲 |
The resin HF3712 is a polyethylene suited for geomembranes production. Due to its high molecular weight this product has an excellent balance of mechanical properties and processability.
|
Braskem PE HF3714XP | 拉丁美洲 |
The HF3714XP is a medium density polyethylene grade suited for the production of geomembranes. Due to its high molecular weight, this product has excellent balance of mechanical properties, productivity and processability. Its robust additive package improves performance and life time in applications directly exposed to weathering and UV radiation.
Additives:
Antioxidants and UV light stabilizers
Applications:
Geomembrane
Processes:
Geomembranes produced by blown film extrusion
|
Braskem PE HS4506 | 拉丁美洲 |
HS4506 is a High Density Polyethylene specially developed for the manufacturing of blow molding fuel tanks. It has high molar mass and shows excellent processability. Besides, it shows excellent tenacity, high resistance to stress cracking, and outstanding impact resistance.
Application:
Cold start tanks, Mono and multilayer fuel tanks for cars, Sheets extrusion for pick up trunk protector
Process:
Extrusion Blow Molding.
|
Braskem PE HS4506A | 拉丁美洲 |
HS4506A is a High Density Polyethylene specially developed for the manufacturing of blow molding fuel tanks. It has high molar mass and shows excellent processability. Besides, it shows excellent tenacity, high resistance to stress cracking, and outstanding impact resistance. The resin contains additives to protect it against ultraviolet radiation action.
Application:
Mono and multilayer fuel tanks for trucks; sheet extrusion for pickup protectors.
Process:
Extrusion Blow Molding.
|
Braskem PE HS5010 | 拉丁美洲 |
HS5010 is a high density polyethylene with high molecular weight, copolymer. Offers good processability, have good stress cracking resistance and low temperature impact resistance.
Applications:
Packages up to 20 liters for chemicals, domestic and industrial
Process:
Thermoforming, Extrusion Blow Molding, Sheets extrusion
|
Braskem PE HS5103 | 拉丁美洲 |
HS5103 is a high density polyethylene, copolymer, with a high molecular mass indicated for large volume blow molding. Storage drums produced with HS5103 offer excellent impact resistance.
Application:
Blow molding large volumes, 200 liters storage drums
Process:
Extrusion Blow Molding.
|
Braskem PE HS5103M | 拉丁美洲 |
HS5103M is a high molecular weight high-density polyethylene, copolymer. Suitable for large parts blow molded an L-ring drum. Exhibit a good impact resistance and excellent stress cracking resistance (ESCR).
Applications:
200 liters storage drums, Blow molding large volumes
Process:
Extrusion Blow Molding.
|
Braskem PE HS5403 | 拉丁美洲 |
HS5403 is a high density polyethylene, copolymer, exhibits high die swell, good environmental stress cracking resistance (ESCR), good surface quality and high transparency.
Applications:
Tissue and hygiene packaging, Blow molding small volumes, Lubricanting oil packaging, Cosmetic packaging
Process:
Injection blow molding, Extrusion Blow Molding
|
Braskem PE HS5407 | 拉丁美洲 |
HS5407 is a high molecular weight, high-density polyethylene, copolymer. Exhibit excellent wall thickness uniformity, an improved balance between stiffness and impact and high environmental stress cracking resistance (ESCR).
Applications:
Blow molding large volumes, Bedliner, IBC (Intermediate Bulk Container), Packages up to 60 liters for domestic, chemical and industrial products, Packages up to 60 liters for food products
Process:
Extrusion Blow Molding.
|
Braskem PE HS5407V1 | 拉丁美洲 |
HS5407V1 is a high molecular weight, high-density polyethylene, copolymer. Exhibit an elevated parison swelling, excellent wall thickness uniformity, an improved balance between stiffness and impact, good environmental stress cracking resistance (ESCR) and extended weathering resistance.
Applications:
Blow molding large volumes, IBC (Intermediate Bulk Container)
Process:
Extrusion Blow Molding.
|
Braskem PE HS5502 | 拉丁美洲 |
HS5502 is a high density polyethylene, copolymer. Offers good processability and bottles produced have excellent stiffness.
Applications:
Blow molding small volumes
Processes:
Injection blow molding, Extrusion Blow Molding
|
Braskem PE HS5502XP | 拉丁美洲 |
HS5502XP is a High Density Polyethylene, copolymer, that offers a high stress cracking resistance (ESCR) maintaining a good balance between mechanical properties and processability.
Applications:
Blow molding small volumes
Process:
Extrusion Blow Molding.
|
Braskem PE HS5608 | 拉丁美洲 |
HS5608 is a high-density polyethylene with high molecular weight, copolymer. Offers good processability, outstanding stress cracking resistance (ESCR), excellent stiffness and impact strength. Suitable for blow molding of large volumes
Applications:
Blow molding large volumes, Packages up to 60 liters for domestic, chemical and industrial products
Process:
Extrusion Blow Molding.
|
Braskem PE HT4219 | 拉丁美洲 |
HT4219 is a high density polyethylene developed especially for the production of thin-walled irrigation pipes with excellent processability and low gel content, as well as in the production of medium and high wall thickness pipes. The resin can be used neat or in blends with LLDPE and HDPE.
Applications:
Pipes for irrigation
Processes:
General extrusion.
|
Braskem PE IA58 | 拉丁美洲 |
IA58 is a High Density Polyethylene, with narrow molecular weight distribution, for injection molding applications. It offers good processability combined with good impact strength and stiffness.
Applications:
Toys, Thin wall parts, Houseware, Caps
Process:
Injection Molding.
|
Braskem PE IA59 | 拉丁美洲 |
IA59 is a High Density Polyethylene, with narrow molecular weight distribution, homopolymer, for injection molding applications. It offers high stiffness, excellent impact strength, good processability and low warpage.
Applications:
Houseware, Pallet, Boxes and Crates, Caps
Process:
Injection Molding.
|
Braskem PE IA59U3 | 拉丁美洲 |
IA59U3 is a high density polyethylene for injection molding, with a narrow molecular weight distribution. It exhibits high stiffness, good processability and low warpage, besides excellent impact strength.
Additives:
Light stabilizer.
Application:
Boxes and Crates, Caps, Houseware, Pallet
Processes:
Injection Molding
|
Braskem PE IB-58 | 拉丁美洲 |
IB58 is a high density polyethylene with narrow molecular weight distribution, for injection molding applications. It offers high melt flow rate associated with an excellent stiffness and good impact strength.
Applications:
Caps, Thin wall parts, Toys
Processes:
Injection Molding.
|
Braskem PE IC32 | 拉丁美洲 |
IC32 is a linear low density polyethylene with narrow molecular weight, for injection molding. It offers good fluidity, great flexibility, tenacity and low warpage.
Application:
Caps, Houseware, Large flat injection molded articles, Masterbatches
Processes:
Extrusion, Injection Molding
|
Braskem PE IDEALIS500 | 北美洲 |
Braskem Idealis500 is the only High Molecular Weight Polyethylene resin in powder form specially designed for the compression molding process.
Applications:
Applications range from food handling cutting boards and playground toys to technical parts.
|
Braskem PE IE-59 U3 | 拉丁美洲 |
IE59U3 is a high density polyethylene, with narrow molecular weight distribution, for injection molding applications. It offers high stiffness and impact strength, associated with good processability and low warpage.
Additives:
Light Stabilizer.
Application:
Boxes and Crates, Boxes for frozen products, Technical parts, Trash cans
Processes:
Injection Molding
|
Braskem PE IF33 | 拉丁美洲 |
IF33 is a linear low density polyethylene with narrow molecular weight, for injection molding applications. It offers high fluidity, good flexibility and low warpage.
Application:
Houseware, Large flat injection molded articles, Masterbatches, Caps
Processes:
Injection Molding, Extrusion
|
Braskem PE IG58 | 拉丁美洲 |
IG58 is a high density polyethylene with a narrow molecular weight distribution, especially developed for multi-cavity and fast cycle injection molding. It offers high melt flow rate, associating good stiffness and impact strength.
Application:
Toys, Thin wall parts, Houseware, Caps
Processes:
Injection Molding
|
Braskem PE IN34 | 拉丁美洲 |
IN34 is a linear low density polyethylene with narrow molecular, for injection molding applications. It offers high fluidity and low warpage.
Applications:
Caps, Houseware, Large flat injection molded articles, Masterbatches
Processes:
Extrusion, Injection Molding
|