DOW™ LDPE PT 7007 R Polyethylene Resin is a low density polyethylene designed for extrusion coating applications. DOW™ LDPE PT 7007 R Polyethylene Resin has been designed to offer minimum volatile organic carbon (VOC) levels for use in extrusion coating, contributing to low factory emissions and optimal sensory performance. DOW™ LDPE PT 7007 R Polyethylene Resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Applications: - Paper. - Board and foil coatings for packaging. - Food and non-food. DOW™ LDPE PT 7007 R Polyethylene Resin should comply with: - U.S. FDA CFR 177.1520(c)2.2 - EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact your nearest office regarding food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. DOW™ LDPE PT 7007 R complies with ISCC PLUS certification for bio-based plastics

DOW™ LDPE PT 7007 REN Polyethylene Resin is a low density polyethylene designed for extrusion coating applications. DOW™ LDPE PT 7007 REN Polyethylene Resin has been designed to offer minimum volatile organic carbon (VOC) levels for use in extrusion coating, contributing to low factory emissions and optimal sensory performance. DOW™ LDPE PT 7007 REN Polyethylene Resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Applications: - Paper. - Board and foil coatings for packaging. - Food and non-food. Complies with: - U.S. FDA CFR 177.1520(c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE PT 7007 聚乙烯树脂是一种低密度聚乙烯，适用于挤出涂覆加工领域。在挤出涂覆加工工艺中，DOW LDPE PT 7007 聚乙烯树脂有机挥发物 (VOC)水平降至最低，从而降低了工厂的排放量， 使加工现场更适宜工作。 DOW LDPE PT 7007 聚乙烯树脂具有以下特性: - 优异的牵伸性能 - 边缘稳定性好 - 缩颈小 备注：当用于接触食品的应用领域时，在未经改性以及加工流程遵循良好制造规范要求时，陶氏LDPE PT 7007 聚乙烯树脂应该符合美国食品和药物管理局法规CFR 177.1520(c)2.2EU, No 10/2011。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 纸张 - 包装材料用的纸板涂层和箔材涂层 - 食品和非食品的包装材料

LDPE SC 7642 R Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 R Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

LDPE SC 7642 REN Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 REN Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

LDPE SC 7642 Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 Consult the regulations for complete details.