AXELERON™ CC B-3485 NT 是一种可发泡的、高分子量、高密度聚乙烯绝缘材料，专门用于发泡/表皮单芯电话线线。该材料含有一种化学发泡剂，采用温控挤出加工时可以得到50%的发泡量。这个高度稳定的产品具有优异的机械性能和电性能，应用于高速挤出加工线。 规格要求： 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ CC B-3485 NT 作为绝缘材料的电话线应该满足以下规格的要求： - REA PE “带有发泡绝缘材料的填充电话电缆” - ICEA S-84-608 “电信电缆；填充的聚烯烃绝缘的铜导线 —— 技术要求”

AXELERON™ CC B-3487 NT 是一种高密度聚乙烯孔洞材料，用于电话线和其他孔洞结构的绝缘材料的发泡/表皮层。该材料含有一种化学发泡剂，采用温控挤出加工时可以得到50%的发泡量。AXELERON™ CC B-3487 NT 具有独特的抗氧剂体系，在油脂填充的电缆应用领域具有优异的长期绝缘耐老化性能。 建议将这种材料用于在炎热环境下工作的产品。在采用正确的商用挤出机挤出加工规范的条件下，该产品应该可以满足Telcordia GR 421 CORE 和 ICEA S-84-608规格中对绝缘耐老化性能的严格要求。AXELERON™ CC B-3487 NT 具有优异的挤出加工特性，使用该产品制备的绝缘产品具有优异的机械性能和电性能。

AXELERON™ CS B-6005 NT 是一种高分子量、低密度聚乙烯绝缘材料，它将机械性能和电性能很好地结合在一起，使其适合作为主要的介电材料。 AXELERON™ CS B-6005 NT 满足以下原材料规格要求： - ASTM D 1248 IA-5, Grades E4 与 E5 - 联邦 LP-390C II-L, Grade 3, Category 5 - MIL-C-17F, Amendment 1, Paragraph 3.5.2.1, Type A

AXELERON™ CS 7540 NT CPD is a linear low-density polyethylene (LLDPE) extrusion compound ("CPD") produced by the UNIPOL™ PE Process. It is a general purpose insulation that can be used as a high speed telephone singles insulation (air-core cable only; not recommended for jelly-filled cable) and high frequency coaxial inner skin. It combines excellent electrical properties with outstanding stress crack resistance. Specifications: AXELERON™ CS 7540 NT CPD meets the following raw material specifications: - ASTM D-1248 Type I Category 4, Grade E4, E5 - Federal LP-390 C, II-L, Grade 3, Category 4 - REA Specification PE-200, Appendix A - ISO 1872-PE - KHKN,18-D006 Cables insulated with AXELERON™ CS 7540 NT CPD using sound commercial extrusion practice, should meet the following industry cable specification: - ASTM: D 1351-02 - EN-50290-2-23 - IEC 60708

AXELERON™ CS K-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS K-3364 NT CPD provides excellent processability for high-speed wire insulating extrusion processes. AXELERON™ CS K-3364 NT CPD provides good performance for telephone insulation applications, primarily cable designs for aerial environments. AXELERON™ CS K-3364 NT CPD is optimized to meet major international age testing standards and specifications for both solid and foam/skin insulation use. Specifications AXELERON™ CS K-3364 NT CPD meets the following raw material specifications: - ASTM D 1248 Type III Category A-4, Grade E8 and E9 - Federal LP-390 C, II-H, Grades 1 and 2, Category 4 - ISO 1872-PE, KHKN,45-D006 Telephone wire insulated with AXELERON™ CS K-3364 NT CPD, using sound commercial extrusion practices, should meet the following cable specifications: - ICEA S-84-608 - EN-50290-2-23 - IEC 60708 - DIN VDE 0819-103 - BS 6234 type H03 - NF C 32-060

AXELERON™ CS L-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, especially in the more demanding Power over Ethernet (PoE) and grease-filled cable applications while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS L-3364 NT CPD is designed for excellent processability for high-speed wire insulating extrusion processes. AXELERON™ CS L-3364 NT CPD provides excellent performance across the full range of network data cable and telephone insulation applications. AXELERON™ CS L-3364 NT CPD is optimized to meet rigorous Telcordia requirements, as well as all major international age testing standards and specifications for use as both solid and foam/skin insulation. There is also considerable AXELERON™ CS L-3364 NT CPD use in a wide variety of other twisted pair, coaxial, hybrid data and power cable designs. Specifications AXELERON™ CS L-3364 NT CPD meets the following raw material specifications: - ASTM D 1248 Type III Category A-4, Grade E8 and E9 - Federal LP-390 C, II-H, Grades 1 and 2, Category 4 Network & industrial ethernet data cable and telephone wire insulated with AXELERON™ CS L-3364 NT CPD, using sound commercial extrusion practices, should meet the cable specifications including but not limited to: - ICEA S-116-732 Category 6 & 6A, ANSI/NEMA WC-66 Category 3-6A - ANSI/TIA-568-C.2 Category 5E, 6, & 6A - IEEE Specification: IEEE 802.3bt Type 1, Type 2, Type 3, Type 4 - REA PE 39 "Filled Telephone Cable" & REA PE 89 "Filled Telephone Cable with Expanded Insulation" - Telcordia GR-421-CORE, Issue 1; 3 "Generic Requirements for Metallic Telecommunications Cables" - ICEA S-84-608 "Telecommunications Cable; Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements"

AXELERON™ CS O-3364 NT 是一种分子量高、高密度的聚乙烯绝缘材料，具有优异的抗氧化稳定性、韧性和耐磨性能。AXELERON™ CS O-3364 NT 以可在高速绝缘材料挤出加工线上提供优异的加工性能。AXELERON™ CS O-3364 NT 绝缘材料已经经过优化，提高了绝缘材料的导体粘连。这种较高的导体粘连由提高了厚壁绝缘材料和诸如数据用LAN双绞线的加工范围和绝缘材料的回缩性能。 AXELERON™ CS O-3364 NT 可为所有种类的电信用双绞线带来良好的性能表现。AXELERON™ CS O-3364 NT 可以轻松地满足对实心和发泡/表皮电话电缆绝缘材料的Telcordia 和ICEA 要求以及绝大多数国际上的老化测试标准和规格要求。AXELERON™ CS O-3364 NT 可提供优异的长期耐老化性能，满足严格的Telcordia测试要求。 规格要求： AXELERON™ CS O-3364 NT 满足以下材料规格要求： - ASTM D 1248 Type III Category A-4, Grade E8 和 E9 - 联邦LP-390 C, II-H, Grades 1 和 2, Category 4 在使用了适当的设计和制造规范的情况下，采用 AXELERON™ CS O-3364 NT 作为绝缘材料的电话线可满足以下规格要求： - Telcordia GR-421-CORE, 第一期, 1998年12月份, “金属电信电缆的一般要求” - ICEA S-84-608, “电信电缆；充填的聚烯烃绝缘的铜导线 —— 技术要求” - REA PE 39, “充填电话电缆” - REA PE 89, “带有发泡绝缘的充填电话电缆”

AXELERON™ CX A-0078 NT 是一种成核剂，用于高性能同轴电缆所用的气注泡孔绝缘材料。其典型的终端应用包括75 ohm CATV配电电缆和干线同轴电缆，或者更粗的用于移动电话技术的50 ohm RF同轴电缆。AXELERON™ CX A-0078 NT 以HP LDPE为基础树脂，向其中加入了10%的一种损耗小的成核剂。在气注之前，必须将该母料与HDPE、LDPE材料和AXELERON™ CX 6944 NT CPD HDPE 、AXELERON™ CX 1253 NT CPD LDPE 分别进行干混。为了优化发泡和泡孔结构，成核剂含量应该在0.1-0.3%，也就是说共混物中的母料含量为1-3%。由于这种材料具有优异的电性能，使其特别适宜于制造厚壁（>7mm绝缘材料）的发泡绝缘材料。它还可赋予产品以优异的加工性能，发泡容易，发泡率可高达80%。

低密度绝缘材料 AXELERON™ CX A-1253 NT 是一种分子量中等、低密度聚乙烯绝缘树脂，应用于多种对电性能严格要求的用途。DFDA-1253 Natural 可以作为注气工艺中的一部分树脂用于同轴电缆发泡绝缘材料的制备。 规格 AXELERON™ CX A-1253 NT 满足以下原材料规格要求： - ASTM D 1248 Type 1, Class A, Category 3 - 联邦 LP-390C Type 1, Class L, Grades 1 和 2, Category 3

AXELERON™ CX 1258 NT CPD is a medium molecular weight, low density polyethylene insulation compund ("CPD") for use in gas-injected foam insulation for coaxial/RF cables. AXELERON™ CX 1258 NT CPD can be used in combination with a high density polyethylene resin such as DGDA-6944 NT. To obtain optimal cellular structure, an additional 0.1% to 0.3% of a suitable nucleating agent is recommended, such as DFNA-0012 NT and DFNA-0078 NT masterbatches Main Characteristics - Low dissipation factor performance - Excellent compatibility with HDPE The polymeric material, using industry standard commercial extrusion practice, is compliant for use in Wire and Cable components that meet cable specification(s): - ASTM D 1248 Type 1, Class A, Category 3 Consult the regulations for complete details.

AXELERON™ CX 4960 NT CPD 是一种可发、低密度聚乙烯材料，用于绝缘材料领域，该应用要求材料具有较好的多孔结构和电损耗低。该产品含有一种热敏吹塑添加剂，完全发泡时的密度在0.40 至0.48 g/cm3 之间。 AXELERON™ CX 4960 NT CPD 广泛应用于同轴电缆应用领域，比如平行双线电缆和CATV 电缆。

AXELERON™ CX 6923 NT CPD is a high density polyethylene compound designed for use in physical foaming processes where high expansion rates (60 - 80%) are required. This compound is designed to offer excellent high speed processability as given by low extrusion pressures and smooth insulation surface quality. Furthermore, since it is fully pre-compounded with all the necessary ingredients, it offers better dispersion of the nucleating agent allowing higher expansion rates to be achieved with more consistent processability (capacitance and diameter). It is stabilized for long term cable performance with minimal impact on signal attenuation. Applications: Typical applications include conventional 75 Ohm CATV cables and LAN cables. Specifications: AXELERON™ CX 6923 NT CPD meets the following material specifications: - ASTM D 1248 Class A, Type III, Category 3 - ISO 1875-PE, KGHN, 45-D-045

高密度绝缘材料 AXELERON™ CX A-6944 NT 是一种高密度聚乙烯树脂，用于制作CATV电缆用的气注发泡绝缘材料。这种高密度聚乙烯树脂具有优异的电性能和韧性，以及其应用领域所需的稳定性。AXELERON™ CX A-6944 NT 常与AXELERON™ CX 1253 NT CPD LDPE一同使用。为了达成最优的泡孔结构，建议加入0.1%至 0.3%的成核剂，比如AXELERON™ CX A-0012 NT CPD 和AXELERON™ CX 0078 NT CPD 母料所添加的成核剂。 规格 AXELERON™ CX A-6944 NT 满足以下原材料规格要求： - ASTM D 1248 Type IV, Class A, Category 3 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ CX A-6944 NT 作为绝缘材料的电线应该满足以下规格要求： - Telecordia GR-1398-CORE - Telecordia GR-1399-CORE

Dow AXELERON™ CX A-0012 NT 是一种母料，作为一种成核剂应用于气注加工。它是专为易于与 DGDA-6944 NT 或者 DGDB-6944 NT HDPE 和DFDA-1253 NT LDPE 混配而研制的。若使用得当，该产品会形成小型的、均匀分布的泡孔结构。该母料是以高压LDPE为基础树脂，添加了10%的一种发热性的化学发泡剂。该产品的使用量应该是0.1%至0.3%的成核剂含量，或者是1-3%的母料含量。典型的应用包括CATV引入电缆，型号为 59, 6, 7 和 11。

AXELERON™ FO 1311 NT CPD is a high-performance compound with an outstanding balance of processability and toughness. It is designed for use in Submarine fiber optical cable as well as other power and telecommunication jacketing. AXELERON™ FO 1311 NT CPD also has excellent electrical properties, superior environmental stress crack resistance and excellent UV resistance. Specifications AXELERON™ FO 1311 NT CPD meets the following material specification: - ASTM D-1248 Type III, Class A, Category 5, Grade E9 Cables jacketed with AXELERON™ FO 1311 NT CPD, using industry standard commercial extrusion practice, should meet the following cable specifications: - IEC 60502, ST 7 - IEC 62067, ST 7 - IEC 60840, ST 7 - ICEA S-94 649 - ICEA S-108 720 - ICEA S-97 682 - ICEA-S-87-640 - IEC 60794

高密度电缆护套材料 AXELERON™ FO A-6318 BK 是一种采用UNIPOL™ PE工艺制备的高密度聚乙烯护套材料。此材料具有非常好的工艺性能，低收缩特性，在韧性、耐应力开裂、耐磨性能，防白蚁和耐候性能上具有较好的平衡性。 AXELERON™ FO A-6318 BK 适合作为光缆电缆的护套材料。 规格 AXELERON™ FO A-6318 BK 满足以下原材料规格要求： - ASTM D 1248 Type III, Class C, Category 4, Grades E8, E9 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ FO A-6318 BK 作为护套材料的电线和电缆应该满足以下规格要求： - ICEA: S-61-402 - ANSI: C8.35 - REA PE 39 and PE 89 - IEC 60502

护套产品 AXELERON™ FO A-6548 BK 是一种高质量的、中等密度的聚乙烯材料，用于作为电缆的护套材料。它具有良好的加工特性以及韧性、耐应力开裂和抗形变性能。 规格要求： AXELERON™ FO A-6548 BK 满足以下原材料规格要求： - ASTM D 1248 Type II, Class C, Category 4, Grades E6, E7, E8, E9, J4, J5 - 联邦 LP-390C Type III, Class M, Grades 2, 3, Category 4 - REA PE 39 和 89 (原材料部分)

AXELERON™ FO 6549 NT CPD is a medium-density polyethylene compound ("CPD") designed for communications and power cable jacket use. It provides good electrical properties' processability combined with toughness, and stress crack resistance. Specifications AXELERON™ FO 6549 NT CPD meets the following raw material specifications: - ASTM D 1248 Type II, Class A, Category 4

AXELERON™ FO 6561 BK CPD is a medium density polyethylene compound for use in cable jacketing applications for both telecom and power cables. AXELERON™ FO 6561 BK CPD shows good processing capability on jacketing extrusion lines exhibiting moderate extrusion pressures while yielding good surface smoothness and dimensional stability. AXELERON™ FO 6561 BK CPD provides good abrasion resistance and excellent ESCR properties. Overview: - Excellent ESCR - Low shrinkage properties - Good abrasion resistance and toughness Cable jacketed with AXELERON™ FO 6561 BK CPD, using sound commercial extrusion practices, should meet the following specifications: - EN 50290-2-24 - IEC 60502 Type ST3, ST7, - IEC 60840 Type ST3, ST7 - HD 620 DMP2, DMP9, DMP14, DMP15, DMP17 - IEC 60708 - GB/T 15065 - YD/T 1485

陶氏AXELERON™ FO 8864 BK CPD 是一种高分子量、线性、中等密度的、黑色聚乙烯材料，是为光纤和普通金属导体电缆护套的应用而开发的。这种材料具有非常好的加工特性，可制成非常强韧的电缆护套。陶氏的AXELERON™ FO 8864 BK CPD亦具备优异的耐环境应力开裂性能、耐候性能以及抗热氧化降解性能。 陶氏 AXELERON™ FO 8864 BK CPD 在光纤电缆护套应用领域提供优异的低温光信号衰减性能。该材料结合了减小挤出回缩应力与优异的拉伸模量。因此，最大程度地减小了在温度周期变化过程中电缆护套对光纤电缆所施加的收缩力。 规格 陶氏AXELERON™ FO 8864 BK CPD 符合以下原材料规格的要求： - ASTM D 1248：第 II类型，C级，第4类，E9和J4等级 - 联邦LP-390C：第 III类型，M级，2、3等级，第4类 - REA PE 39 和89（原材料部分）

中等密度的电缆护套材料 AXELERON™ FO 8864 NT CPD 是一种分子量高的、中等密度的聚乙烯材料，用作光纤和常规金属性导体电缆护套材料。这种材料可以着色，具有非常好的挤出加工性能。AXELERON™ FO 8864 NT CPD 可使电缆护套具有韧性，具有优异的耐环境应力开裂性能。这种材料中具有抗紫外线稳定性，提高了其耐阳光直射的性能。 作为一种光纤护套材料，AXELERON™ FO 8864 NT CPD 可提供优异的低温光信号衰减性能，这是通过将减小挤出回缩应力和优化低温拉伸模量来实现的。已经有大量的应用测试数据表明， 规格 AXELERON™ FO 8864 NT CPD 满足以下原材料规格要求： - ASTM D 1248: Type II, Class A, Category 4, Grades E9 和 J4 - 联邦 LP-390C: Type II, Class M, Grade 1, Category 4

AXELERON™ GP 6059 BK CPD is a prime quality telephone cable black jacketing compound ("CPD"). It offers improved low temperature and high temperature performance plus excellent environmental stress-cracking resistance, outdoor weatherability, and toughness. Specifications AXELERON™ GP 6059 BK CPD meets the following raw material specifications: - ASTM D 1248 IC-4, Grades E5, J1, J3 - Federal LP-390C III-L, Grades 2, 3, 4 and Category 4 - REA PE-22, 38, 39, 86, 89, 90 (Raw Materials Sections) - ISO 1872-PE, KCH, 18-D006 - GB/T 15065 Cable jacketed with AXELERON™ GP 6059 BK CPD, using sound commercial extrusion practices, should meet the following specifications: - ICEA: S-83-640 - ASTM D 2308 - Telcordia GR-421-CORE - EN 50290-2-24 - IEC 60708 - YD/T 901 - IEC 60502 ST3, ST7 - IEC 60840 ST3, ST7 - HD 620 S2, Part 1, Table 4B, DMP 10, DMP 14, DMP 17 - ICEA S-94-649 - ICEA S-97-682 - ICEA S-108-720 - ICEA S-84-608 - YD/T 1092 - IEC 62067, ST3, ST7 - IEC 60794

AXELERON™ GP 6314 BK CPD is a linear low density based polyethylene jacket compound ("CPD"). This compound provides a good balance of processability, toughness, stress-cracking resistance, abrasion resistance, and weather resistance. AXELERON™ GP 6314 BK CPD is designed for use as a general purpose jacket for telecommunication cables. Main Characteristics: - Good toughness - Good Stress Cracking Resistance - Good Abrasion Resistance - Excellent Processability

AXELERON™ GP A-7590 NT 是一种双峰聚乙烯树脂，用于通讯和电力电缆护套。AXELERON™ GP A-7590 NT 具有优异的耐环境应力开裂性能和低温性能。 规格 AXELERON™ GP A-7590 NT 满足以下材料规格： - ASTM D1248 Type III, Class A, Category 5, Grade J5

AXELERON™ GP A-0037 BK CPD 是一种高质量的炭黑色母料粒料。它是专为与陶氏的聚乙烯树脂配套使用而研制的，这些材料是作为黑色护套应用于电信和电力电缆。这是一种45%的炭黑色母料，当其在特定的聚乙烯树脂中稀释时，可满足电信和电力电缆规格中对炭黑含量的要求以及分散要求。AXELERON™ GP A-0037 BK CPD 的粒径小（平均为20 milli microns），是一种吸湿性低的炭黑颜料，为最终成品带来优异的耐候性能。5.85% 是一种标准的稀释量，其最终产品中的炭黑含量为2.6%。AXELERON™ GP A-0037 BK CPD 仅用于工业用途，不建议应用于自来水管。 规格 AXELERON™ GP A-0037 BK CPD 满足严格的陶氏电线和电缆质保测试。

AXELERON™ GP C-0037 BK 是一种高质量的炭黑色母料粒料。它是专为与陶氏电线和电缆事业部的聚乙烯树脂配套使用而研制的，这些材料是作为黑色护套应用于电信和电力电缆。这是一种45%的炭黑色母料，当其在特定的聚乙烯树脂中稀释时，可满足电信和电力电缆规格中对炭黑含量的要求以及分散要求。AXELERON™ GP C-0037 BK 的粒径小（平均为20 milli microns），是一种吸湿性低的炭黑颜料，为最终成品带来优异的耐候性能。5.85% 是一种标准的稀释量，其最终产品中的炭黑含量为2.6%。AXELERON™ GP C-0037 BK 含有一种加工助剂，以清除最终的护套产品中的挤出机头滴料问题。AXELERON™ GP C-0037 BK 仅用于工业用途，不建议应用于自来水管。 规格 AXELERON™ GP C-0037 BK 满足严格的陶氏电线和电缆用于质保的分散测试。

高压低密度电缆护套材料 AXELERON™ GP C-0588 BK 是一种高质量的电讯电缆黑色护套材料，含有炉黑。该产品具有优异的耐环境应力开裂性能、室外耐候性能、低温性能和可挤出性能。AXELERON™ GP C-0588 BK 含有少量的机头防滴落添加剂. 规格 AXELERON™ GP C-0588 BK 满足以下原材料规格要求： - ASTM D 1248 IC-5, Grades E5, J1, J3 - 联邦 LP-390C, III-L, Grades 2, 3 和 4, Category 5 - REA PE-22, 38, 39, 86, 89, 90 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ GP C-0588 BK 作为护套材料的电缆应该满足以下规格要求： - ICEA: S-61-402; NEMA WC5 - ANSI: C8. 35 - ASTM: D 2308 - 英国邮政规格M-132G - Telcordia GR 421 Core - ANSI/ICEA S-84-608-1988

AXELERON™ GP D-0588 BK CPD, with a density of 0.93, and a melt index of 0.2, is a prime quality telephone telecom cable black jacketing compound ("CPD"). It offers excellent environmental stress cracking resistance, outdoor weatherability, toughness, low temperature performance, and extrudability. AXELERON™ GP D-0588 BK CPD can be used by wire and cable manufacturers for the entire range of telephone telecom cable sizes and configurations. It is suitable for both aircore and jelly-filled construction, and in both aerial and buried applications. Specifications AXELERON™ GP D-0588 BK CPD meets the following raw material specifications: - ASTM D 1248 IC-5 Grades, E5, J1 J3 - ISO 1872-1-PE, KCHL, 23-D003 - Federal LP-390 C, III-L, Grades 2,3, and 4, Category 5 - REA PE-22, 38, 39, 86, 89, 90 Cable jacketed with AXELERON™ GP D-0588 BK CPD using sound commercial extrusion practices, should meet the following specifications: - ICEA: S-61-402; NEMA WC 5 - ANSI: C8. 35 - ASTM: D 2308 - British Telecommunications plc M132 - Telcordia GR 421 Core - ANSI/ICEA S-84-608-1988 - EN 50290-2-24, grade LD - IEC 60708 - BS 6234: Type 03C, TS1

AXELERON™ GP K-3479 BK CPD is a high-molecular weight, high density polyethylene compound ("CPD") produced from resin made by the UNIPOL™ process. AXELERON™ GP K-3479 BK CPD is a prime quality telephone and power cable black jacketing that provides good toughness, stress-cracking resistance, outdoor weatherability and abrasion resistance. Specifications AXELERON™ GP K-3479 BK CPD meets the following raw material specifications: - ASTM D-1248: Type III, Class C, Category 5, Grades E10 and J4, J5 - Federal LP-390C: Type III, Class H, Grade 1, Category 5 - REA PE 39 and PE 89 (Raw Material Sections) Cable jacketed with AXELERON™ GP K-3479 BK CPD, using sound commercial extrusion practices, should meet the following specifications: - ICEA: S-61-402; NEMA WC5 - REA PE 39 and PE 89 - ANSI: C8.35 - IEC 60502