Prixene® EA003S56 is a high density polyethylene copolymer developed for blow molding applications. This product is recommended for use in applications which require a combination of high top load strength and good environmental stress crack resistance (ESCR). Typical applications include chlorine, detergents and household chemicals bottles. Pipes for drainage and non-pressurized pipelines. The features presented are good strength and good ESCR. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

Prixene ® EA050I65 is a high density polyethylene copolymer having a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use properties are required. Typical applications includes cuvettes, containers, multipurpose boxes, industrial parts, household items in large containers. The features presented are good strength and easy processability. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

Prixene ® EA072S63 is a high density polyethylene homopolymer, developed specifically for blow molding food containers on reciprocating screw-type equipment. It exhibits excellent processing characteristics and extremely low odor in the finished container. Typical applications include containers for distilled water, milk, juice bottles and food containers. Containers of normal and large size. The features presented are good ESCR, good impact resistance, easy processability, high rigidity and low taste and odor. The product form is in pellets and the process is apt for molding by blown and extrusion. The material complies with FDA regulation title 21.CFR177.1520 (c) 3.1a 21.CFR177.1520 (c) 3.2a

Prixene ® EA080I65 is a high density polyethylene homopolymer. This narrow molecular weight distribution resin is a product of Polymat innovative technology. Parts fabricated from this material exhibit a glossy surface finish, and have good impact strength and rigidity. The typical applications include cuvettes, trays, deportive articles, industrial toys, containers, industrial parts and other similar articles that requires hardness and rigidity. The features presented are good dimensional stability, resistance to the impact, resistance UV, resistance to the deformation and high rigidity The product form is in pellets and the apt process is for injection molding. The material fulfills with the FDA regulation title 21.CFR177.1520 (, c) 3.1a and 3.2a

Prixene ® EA200I54 is a high density, narrow molecular weight polyethylene copolymer intended for applications requiring a glossy surface finish and reasonably good impact strength and rigidity. It is characterized by a high melt index which allows easy processing of medium to thin-walled articles. The applications are of general use, taps, buckets, toys, household goods, containers for food, corks, etc. The features presented are good dimensional stability, impact resistance, UV resistance, low deformation and high rigidity, low temperature impact and good processability. The product form is in pellets and the apt process is for injection molding. The material complies with the FDA regulation title 21.CFR177.1520 (, c) 3.1a

Prixene®EB004E22 Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures. This resin, when properly fabricated, shows an excellent combination of processability, stiffness and physical properties. This product does not contain slip nor antiblock additives. The features presented are good processability, high impact resistance, low density, good tenacity, and good complies with FDA. The product form is in pellets. The material fulfills the FDA regulation title 21.CFR177.1520 (c) 2.2.

Prixene® EB020E20 is a Low Density Polyethylene grade without slip and anti-block additives. It typically exhibits better draw down ability with high output. Films typically exhibit good optics and good heat seal properties. Typical applications are bags and pouches, general purpose film. This product is not intended for use in medical and pharmaceutical applications. The features presented are good processability, low density and may be in contact with food. The product form is in pellets and the process used is for film extrusion. The material does not contain antiblok additives and sliding. The material complies with FDA regulation title 21.CFR177.1520 (. C) 2.1 and (. C) 2.2

Prixene® EB020E20C is a Low Density Polyethylene grade formulated with slip and anti-block additives. It typically exhibits better draw down ability with high output. Films typically have good optics with low friction and low blocking. Typical applications are thin shrink film, lamination film, packaging films for food and industrial goods, bags and pouches. It also enables high speed converting without sticking. This product is not intended for us in medical and pharmaceutical applications The features presented are good processability, low density and may be in contact with food. The product form is in pellets and the process used for film extrusion. The material contains antiblok additives and sliding. The material complies with FDA regulation title 21.CFR177.1520 (. C) 2.1 and (. C) 2.2

Prixene® EB070E17 is a low density polyethylene resin that offers an excellent balance in mechanical and optical properties. The applications range from cardboard coating, Kraft paper, aluminum, cellophane and packaging coating made of cardboard for liquids drink / juices, caps and flexible lids with good gloss, dry food packaging and general use as well as any article for the home. The features presented are good flexibility and resistance, low transfer of odors and flavors, good processability, low density and is acceptable for contact with food. The product form is in pellets and transformation method that may be used is extrusion coating at high speed. The material may or may not contain additives. The material complies with FDA regulation title 21.CFR177.1520 (. C) 2.2.

Prixene® EB450I18 is a low density resin for injection molding of high flow in which the required properties are in good balance of mechanical and low deformation. Typical applications include articles for the home, sports and general use, lids and injection molded parts of large flat area. The features presented are good processability, flexibility, high flow and clarity, low deformation and may be in contact with food. The product form is in pellets. The material complies with FDA regulation title 21.CFR177.1520 (. C) 2.2.

Prixene® EL010E20 is a Linear Low Density Polyethylene natural resin designed for wire and cable applications, contains a low level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits excellent ESCR. Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required. Typical applications are Telecommunication and Power cable and halogen-free flame retardant. This product herein is in particular not tested and therefore not validated for use in pharmaceutical and medical applications. The product form is in pellets. LLDPE for blow film. The material contains additives. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.2a

Prixene® EL010E20S is a butane linear low density polyethylene resin for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength and good hottack properties. The resin contains anti block and slip erucamide. Typical applications are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, etc. The features presented are an excellent processability, good tenacity, low density, high resistance and good thermo sealing. The product form is in pellets. LLDPE for film extrusion and coextrusion. The material does not contain additives. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.2a

Prixene® EL020E20 is a Linear Low Density Polyethylene grades suitable for general purpose packaging. They are easy to process giving good tensile properties, impact strength and optical properties. Typical applications are lamination film, thin liners, shopping bags, carrier bags, garbage bags, coextruded films, consumer packaging etc. The Features presented are excellent processability, good film strength, high slipping, good thermo sealing and high- blocking. The product form is in pellets. LLDPE for blow film. The material contains additives. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.1a

Prixene® EL020E20S is a Linear Low Density Polyethylene grades suitable for general purpose packaging. They are easy to process giving good tensile properties, impact strength and optical properties. Typical applications are lamination film, thin liners, shopping bags, carrier bags, garbage bags, coextruded films, consumer packaging etc. The features presented are an excellent processability, good strength film and good thermo sealing. The product form is in pellets. LLDPE for blow film and cast film applications. The material does not contain additives. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.1a.

Prixene® EL200I25 is a linear low density polyethylene of butene-ethylene resin, designed for products to be injected and requires a good balance in low-temperature resistance, low deformation and good mechanical properties. Typical applications are for household items, health and medical, lids and frozen food packaging. It is also recommended for the manufacture of masterbatch which requires good flow. The features presented are good tenacity, tear resistance, good flexibility, processability, high impact resistance, low deformation and impact resistance at low temperatures. The product form is in pellets. LLDPE for injection molding and extrusion. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.1a

Prixene® EM050E36 is a Linear Medium Density Polyethylene resin of ethylene-hexene copolymer that offers high performance and excellent processability. The applications of this product are in bags, stretch film, co-extruded and monolayer film, coatings, packaging in general. The features presented are a good power, stretching and bending. The product form is in pellets. LLDPE for blow film. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.1 (a) and 3.2a

Prixene® EM050R36 is a resin Linear Medium Density Polyethylene Copolymer of ethylene-hexene that offers high performance and excellent processability with UV protector. Especially designed for items that will be manufactured by rotational molding. Typic applications of this product are in drums and agricultural storage containers, chemical and children's games. The features presented are a good impact resistance, good tenacity, high ESCR, good rigidity and high UV resistance. The product form is in pellets, LLDPE for rotational molding. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.1 (a) and 3.2a.

Prixene® EP005E50 is a high molecular high density polyethylene copolymer grade specifically designed for blown film applications. This resin features are balance between toughness and stiffness, good impact properties with very low gel level. Typical applications are it can be used for producing heavy duty bags, grocery sacks, shopping bags, carrier- and T-shirt bags, and refuse bags, liners for multi-wall sacks and liners for frozen food meat. The features presented are good rigidity for thin gauge applications film. The product form is in pellets. HMW for blow film. The material complies with FDA regulation title 21.CFR177.1520.