Durez "SUMIKON" PM-9640 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance. PM-9640 is widely used in automotive applications. Typical applications include motor housings, brush holders, and heat insulators.

Durez "SUMIKON" PM-9640 black Phenolic is a two stage glass fiber and mineral filled special purpose molding compound. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance. PM-9640 is widely used in automotive applications. Typical applications include motor housings, brush holders, and heat insulators.

SUMIKON® PM-9640 (Type JR Black) is Glass fiber filled novolac resin molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=1.6).

SUMIKON® PM-9820 (Type JR Black) is Organic fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good electronic property and heat resistance. This grade is official registered UL with V-0 (t=0.16).

SUMIKON® PM-9840 (Type J Black) is Glass fiber , Inorganic filler and Organic fiber filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=0.17).

SUMIKON PM-TX110 is a Heat dissipative themoset molding compounds, Electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON PM-TX115 is a Heat dissipative themoset molding compounds, Electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON PM-TX130 is a Heat dissipative themoset molding compounds, Electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON PM-TX210 is a Heat dissipative themoset molding compounds, Non-electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON PM-TX230 is a Heat dissipative themoset molding compounds, Non-electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON PM-TX250 is a Heat dissipative themoset molding compounds, Non-electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON® RX-6551S Type Green is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON® RX-6552S Type Green is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac polymer. It is supplied in the form of Granular/Molding Powder for Molding.

SUMIKON® X655 is a glass fiber and mineral filled phenolic molding compound with excellent dimensional stability and high electrical insulation properties.

SUMIKON® X6952 Type Black is a glass fiber reinforced phenolic molding compound with superior mechanical properties : highest impact and excellent retention of mechanical properties at elevated temperatures.

SUMIKON X7012 is a glass fiber and glass beads reinforced molding compound with high mechanical strength, even at high temperatures in Long Life Coolants.

SUMILITERESIN® PR-219 is a solid novolac resin based on phenolic terpene polymer. It is supplied in the form of pastilles for wax type emulsion/phenolic type paints.

SUMILITERESIN® PR-3100 I is a liquid resol phenolic resin, which contain solvent Methanol and acetone. It is generally apply for fiber impregnation as reinforcement. Characteristics - SUMILTERESIN® PR-3100 I is preferrable to use for binder, coating and impregnation that need high heat resistance. It is designed High molecule weight, short curing and flexible. - SUMILTERESIN® PR-3100 I can be adjusted in lower viscosity by acetone and methanol.

SUMILITERESIN® PR-3102 I is a liquid straight resol phenolic resin (water base). It is generally apply as wetting agent in resinoid grinding wheel. Characteristics SUMILITERESIN® PR-3102 I is preferable to use for binder or wetting agent of abrasive grain in grinding wheel application. This resin was suitable to handle with medium viscosity. So, ratio powder to liquid can be adjusted with desire wettability.

SUMILTERESIN® PR-3700 I is a liquid straight resol phenolic resin, which contained solvent methanol. It is usually apply for fiber impregnation such as scouring pad, etc Characteristics - SUMILTERESIN® PR-3700 I is preferrable to use for binder and coating that need high heat resistance. It is designed with low free monomer in order to prevent arise of gas and smell during curing process. - SUMILTERESIN® PR-3700 I can be adjusted in lower viscosity by methanol and/or acetone. It also compatible when mix with epoxy resin to improve flexibility.

SUMILITERESIN® PR-50099 I is a standard straight novolak type powder form phenolic resin. Characteristics SUMILITERESIN® PR-50099 I is has hexamine content about 9% and high molecule weight and short flow. - For Friction Material : improve wear rate, high heat resistance and improve hardness. - For Bonded Abrasive : good moldability, preferable for depressed center and cutting wheel.

SUMILITERESIN® PR-50102 is a Powder novolac resin based on Phenolic Novolac polymer. It is supplied in the form of Powder for Abrasives.

SUMILITERESIN® PR-50232 is a liquid resol resin. It is supplied in the form of liquid for adhesives.

SUMILITERESIN® PR-50252 is a Powder novolac resin based on Phenolic Novolac polymer. It is supplied in the form of Powder for Abrasives.

SUMILITERESIN® PR-50273 is a Liquid resol resin based on Phenolic Resol polymer. It is supplied in the form of Liquid for Refractories or Heat insulating material.

SUMILITERESIN® PR-50385 is a Liquid resol resin based on Phenolic Resol polymer. It is supplied in the form of Liquid for Friction Materials.

SUMILITERESIN® PR-50395 is a Powder novolac resin based on Phenolic Novolac polymer. It is supplied in the form of Powder for Organic combination.

SUMILITERESIN® PR-50731 is a no modification based on phenolic novolac polymer. It is suitable for a rubber reinforcement.

SUMILITERESIN® PR-51732 is a modified solid novolac resin. It is supplied in the form of pastilles for adhesives.

FM 1132P is a two-stage phenolic molding compound reinforced with cellulose in pellet form. FM-1132P is recommended to customers desiring approval under ASTM D-5948-96,Type CFI-10. (Replaces Military Specification MIL-M-14H.)

FM 21386 is a single stage phenolic molding compound reinforced with synthetic fiber in pellet form.

FM 3000 is a self-lubricated cellulose reinforced phenolic molding compound, modified for applications requiring reduced friction and low wear.

FM 4004 is a fiberglass and mineral reinforced phenolic novolac compound. This compound exhibits excellent dimensional stability and good strength at elevated temperatures, and conforms to the requirements of ASTM D 5948, Type MFH.

FM 4004F is a fiberglass and mineral reinforced phenolic novolac compound with improved strength properties over FM 4004. This compound exhibits excellent dimensional stability and good strength at elevated temperatures.

FM 4005 is a fiberglass reinforced phenolic novolac molding compound, with excellent dimensional stability and good strength at elevated temperatures. This material is compliant with the specifications of ASTM D 5948, Type MFH.

FM 4005X4648 a fiberglass reinforced phenolic novolac molding compound formulated to increase thermal conductivity and electrical conductance. This material also exhibits low post mold shrinkage.

FM 4005X4649 a fiberglass reinforced two-step phenolic molding compound formulated to increase thermal conductivity, to provide static dissipation and good wear resistance to abrasive media.

FM 4008 is a fiberglass and mineral reinforced phenolic resole compound, with excellent dimensional stability and good strength at elevated temperatures.

FM 4017F is a fiberglass and mineral reinforced phenolic molding compound, with excellent dimensional stability and good strength at elevated temperatures.

FM 7700P is a two-stage phenolic molding compound reinforced with cotton fabric in pellet form. FM-7700P is recommended to customers desiring approval under ASTM D-5948-96,Type CFI-20. (Replaces Military Specification MIL-M-14H.)