DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available. .

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4701 and E - 4501 Easily pourable, thermally conductive, shock resistant potting compounds that are ideally suited for low and high production applications. This series of DI - PAK™ products reduce rejects by exhibiting extremely low stress on potted components. All three of the above DI - PAK™ E products are flame retard-ant and pass the 94V test with a rating of 0.

DI - PAK™ E - 4888 & E - 4889 High performance, flexible potting systems designed to be in constant water immersion while maintaining electrical and physical properties. DI - PAK™ E - 4888 & E - 4889 were designed to meet Naval underwater applications.

DI - PAK™ E - 4888 & E - 4889 High performance, flexible potting systems designed to be in constant water immersion while maintaining electrical and physical properties. DI - PAK™ E - 4888 & E - 4889 were designed to meet Naval underwater applications.

DI-PAK E-4901-2, E-4901-10, & E-4901-30 Low cost, easy to use, potting compounds with fast cycle times. Available in 3 speeds.

DI - PAK™ E - 4901 - 2, E - 4901 - 10, & E - 4901 - 30 Low cost, easy to use, potting compounds with fast cycle times. Available in 3 speeds.

DI - PAK™ E - 4901 - 2, E - 4901 - 10, & E - 4901 - 30 Low cost, easy to use, potting compounds with fast cycle times. Available in 3 speeds.

DI-PAK™ R-4200 A low viscosity, long working life compound designed for potting/encapsulating units requiring high physical strength, and excellent penetration & adhesion to components. DI-PAK™ R-4200 holds its mechanical & electrical properties while under the most severe conditions, due to its low water absorption, and retention of strength at elevated temperatures.

DI-PAK™ R-4912 & R-4260 A/B Low viscosity, fast cure, high performance, high HDT potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.

DI-PAK™ R-4307 A high performance, long working life potting compound for potting/encapsulating units requiring high physical strength and excellent electricals. DI-PAK™ R-4307 is a holds its mechanical and electrical properties while under the most severe conditions. This is due to its low water absorption, thermal shock resistance, and retention of strength at elevated temperatures.

DI-PAK™ R-4307 A high performance, long working life potting compound for potting/encapsulating units requiring high physical strength and excellent electricals. DI-PAK™ R-4307 is a holds its mechanical and electrical properties while under the most severe conditions. This is due to its low water absorption, thermal shock resistance, and retention of strength at elevated temperatures.

DI-PAK™ R-4525 Series A general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK™ R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

DI-PAK™ R-4525 Series A general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK™ R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained..

DI-PAK™ R-4525 Series A general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK™ R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained..

DI-PAK™ R-4525 Series A general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK™ R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

DI-PAK™ R-4528 Series A black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK™ R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

DI-PAK™ R-4528 Series A black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK™ R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

DI-PAK™ R-4528 Series A black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK™ R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

DI-PAK™ R-4528 Series A black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK™ R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

DI-PAK™ R-4545 Series A very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard,shiny, high gloss, plastic finish that is free from “blushing” under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

DI-PAK™ R-4545 Series A very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard,shiny, high gloss, plastic finish that is free from “blushing” under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

DI-PAK™ R-4545 Series A very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard,shiny, high gloss, plastic finish that is free from “blushing” under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

DI-PAK™ R-4545 Series A very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard,shiny, high gloss, plastic finish that is free from “blushing” under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

DI-PAK™ R-4545 Series A very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard,shiny, high gloss, plastic finish that is free from “blushing” under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

DI-PAK™ R-4806 & R-4807 A/B Low viscosity, fast cure, high performance, potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.

DI-PAK™ R-4806 & R-4807 A/B Low viscosity, fast cure, high performance, potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.

DI-PAK™ R-4912 & R-4260 A/B Low viscosity, fast cure, high performance, high HDT potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.

DOW ENDURANCE™ HFDA-0580 BK is a specially formulated semiconductive, vulcanizable compound designed for use as an extruded strand conductor shield and bonded insulation shield applications in medium voltage crosslinked polyethylene insulated cables.(1) DOW ENDURANCE™ HFDA-0580 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that assists in obtaining minimum shrink back on aluminum conductors, especially solid conductors. DOW ENDURANCE™ HFDA-0580 BK is not recommended for use with bare copper conductors. Specifications DOW ENDURANCE™ HFDA-0580 BK is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW ENDURANCE™ HFDA-0580 BK, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 - AEIC: CS8 - IEC: 60502 (1) DOW ENDURANCE™ HFDA-0580 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compounds. For other polymer insulations such as EPR and EPDM's the user is cautioned to establish the utility of DOW ENDURANCE™ HFDA-0580 BK with each formulation.

Overview DOW ENDURANCE™ HFDA-0581 BK is a specially formulated semiconductive, vulcanizable compound designed for use as an extruded conductor shield and bonded insulation shield applications in power cables.(1) DOW ENDURANCE ™ HFDA-0581 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper and aluminum conductors. DOW ENDURANCE™ HFDA-0581 BK offers outstanding extrusion properties with low melt pressures and low temperature generation that result in outstanding scorch resistance under a wide processing window. (1) DOW ENDURANCE™ HFDA-0581 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compound. For other polymer insulations as well as EPR and EPDM the user is cautioned to establish the utility of DOW ENDURANCE™ HFDA-0581 BK with each formulation. Applications DOW ENDURANCE™ HFDA-0581 BK has been designed for semiconductive applications in power distribution and transmission cables for cables rated up to 150 kV. It can be used as inner and outer semiconductive layer for bonded cable applications and as inner semiconductive layer for strippable cable constructions. Contact your Dow representative for further recommendations. Specifications DOW ENDURANCE™ HFDA-0581 BK is designed for use in power distribution and transmission cables. Power cables with conductor and insulation shielding made of DOW ENDURANCE™ HFDA-0581 BK, prepared using sound, commercial fabrication practice, would be expected to meet the following cable specification(s): - IEC: 60502-2 and 60840 - HD: 620 S2 and 632 S2 - BS: 6622 - DIN: VDE 0273 and 0263 - Edf: HN-33-S-23 and HN-33-S-52 - AEIC: CS8, CS9 - ICEA: S-94-649, S-97-682, S-113-684, S-66-524 (NEMA WC7), S-108-720 - GB/T 12706, GB/T 11017

Overview DOW ENDURANCE™ HFDA-0587 BK S is a specially formulated semiconductive, vulcanizable compound designed for use as an extruded conductor shield and bonded insulation shield applications in power cables, especially developed for use in high voltage cables.(1) DOW ENDURANCE™ HFDA-0587 BK S meets stringent requirements for product smoothness. DOW ENDURANCE ™ HFDA-0587 BK S has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper and aluminum conductors. DOW ENDURANCE™ HFDA-0587 BK S offers outstanding extrusion properties with low melt pressures and low temperature generation that result in outstanding scorch resistance and outstanding smoothness under a wide processing window. (1) DOW ENDURANCE™ HFDA-0587 BK S is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compound. For other polymer insulations, the user is cautioned to establish the utility of DOW ENDURANCE™ HFDA-0587 BK S. Applications DOW ENDURANCE™ HFDA-0587 BK S has been designed for semiconductive applications in power distribution and transmission cables for cable rated up to 230 kV. It can be used as inner and outer semiconductive layer for bonded cable applications and as inner semiconductive layer for strippable cable constructions. Contact your Dow representative for further recommendations. Specifications DOW ENDURANCE™ HFDA-0587 BK S is designed for use in power distribution and transmission cables. Power cables with conductor and/or insulation shielding made of DOW ENDURANCE™ HFDA-0587 BK S, prepared using sound, commercial fabrication practice, would be expected to meet the following cable specification(s): - IEC: 60502-2, 60840 and 62067 - HD: 620 S2 and 632 S2 - BS: 6622 - DIN: VDE 0273 and 0263 - Edf: HN-33-S-23 and HN-33-S-52 - AEIC: CS8, CS9 - ICEA: S-94-649, S-97-682, S-113-684, S-66-524 (NEMA WC7), S-108-720 - GB/T 12706, GB/T 11017, GB/T 18890

Overview DOW ENDURANCE™ HFDA-0587 BK is a specially formulated semiconductive, vulcanizable compound designed for use as an extruded conductor shield and bonded insulation shield applications in power cables.(1) DOW ENDURANCE ™ HFDA-0587 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper and aluminum conductors. DOW ENDURANCE™ HFDA-0587 BK offers outstanding extrusion properties with low melt pressures and low temperature generation that result in outstanding scorch resistance under a wide processing window. (1) DOW ENDURANCE™ HFDA-0587 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compound. For other polymer insulations as well as EPR and EPDM the user is cautioned to establish the utility of DOW ENDURANCE™ HFDA-0587 BK with each formulation. Applications DOW ENDURANCE™ HFDA-0587 BK has been designed for semiconductive applications in power distribution and transmission cables for cables rated up to 150 kV. It can be used as inner and outer semiconductive layer for bonded cable applications and as inner semiconductive layer for strippable cable constructions. Contact your Dow representative for further recommendations. Specifications DOW ENDURANCE™ HFDA-0587 BK is designed for use in power distribution and transmission cables. Power cables with conductor and insulation shielding made of DOW ENDURANCE™ HFDA-0587 BK, prepared using sound, commercial fabrication practice, would be expected to meet the following cable specification(s): - IEC: 60502-2 and 60840 - HD: 620 S2 and 632 S2 - BS: 6622 - DIN: VDE 0273 and 0263 - Edf: HN-33-S-23 and HN-33-S-52 - AEIC: CS8, CS9 - ICEA: S-94-649, S-97-682, S-113-684, S-66-524 (NEMA WC7), S-108-720 - GB/T 12706, GB/T 11017

DOW ENDURANCE™ HFDA-0693 BK is a specially formulated semiconductive, vulcanizable compound designed for use in conventional extrusion practices as a strippable insulation shield for medium voltage power cable. HFDA-0693 BK was designed to have excellent processability, while having improved resistance to blocking during storage. HFDA-0693 BK is recommended for use over Dow crosslinked polyethylene compounds. This product provides a moderate strip force over a wide temperature range when used in conjunction with these insulation materials. Specifications DOW ENDURANCE™ HFDA-0693 BK is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW ENDURANCE™ HFDA-0693 BK, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 - AEIC: CS 8 - IEC 60502

DOW ENDURANCE™ HFDA-0800 BK EC is a specially formulated semiconductive, vulcanizable compound designed for conductor shield and bonded insulation shield applications in medium and high voltage crosslinked polyethylene insulated cables.(1) DOW ENDURANCE™ HFDA-0800 BK EC has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper conductor. DOW ENDURANCE™ HFDA-0800 BK EC was specifically developed utilizing a special acetylene carbon black to provide a supersmooth surface to achieve best in class performance and yielding a more perfect interface between the extruded shield and the insulation. As a result, significantly improved cable performance can be expected. Specifications DOW ENDURANCE™ HFDA-0800 BK EC is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW ENDURANCE™ HFDA-0800 BK EC, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 - AEIC: CS8 - IEC: 60502 (1) DOW ENDURANCE™ MV A-0800 is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compounds. For other polymer insulations such as EPR and EPDM's the user is cautioned to establish the utility of DOW ENDURANCE™ MV A-0800 with each formulation.