AFFINITY* PL 1850G CIR Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed to provide blown and cast film products with low temperature sealability, excellent optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging. - High performance sealant layer in flexible packaging - Excellent optics, low temperature seal initiation and abuse resistance Complies with: - U.S. FDA FCN 424 - EU, No 10/2011. - Complies with ISCC PLUS certification for circular plastics Consult the regulations for complete details.

- General purpose plastomer - Excellent impact properties in blends with polypropylene and polyethylene - Highly flexible with good elastic recovery - High clarity - Breathable (high O2 and CO2 transmission rates) - Low temperature sealability - Complies with U.S. FDA FCN 424 (See NOTES 1) - Consult the regulations for complete details. (See NOTES 2) AFFINITY* EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure. Complies with: CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

AFFINITY* EG 8200G Polyolefin Plastomer is produced via INSITE* Technology from Dow Plastics. This is an ethylene alpha-olefin copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer cast film and in blends with other polyolefins to enhance clarity, sealability and toughness of structure. - General purpose plastomer - Excellent impact properties in blends with polypropylene and polyethylene - Excellent flow characteristics - Highly flexible with good elastic recovery Complies with: - U.S. FDA FCN 424 - Canadian HPFP No Objection Consult the regulations for complete details.

Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 175.105(c)(5) - Consult the regulations for complete details.

- Ultra high clarity, low density, low viscosity polyolefin - Excellent thermal stability - Low Tg (Excellent low temperature properties) - Excellent flexibility - Non corrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - Low crystallinity (can be heavily filled) - Low density (better mileage) - Excellent adhesion to diverse substrates when formulated Complies with: - U.S. FDA FCN 424 Consult the regulations for complete details. AFFINITY* GA 1900 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives.

- Ultra high clarity, low density, low viscosity polyolefin - Excellent thermal stability - Low Tg (Excellent low temperature properties) - Excellent flexibility - Non corrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - Low crystallinity (can be heavily filled) - Low density (better mileage) - Excellent adhesion to diverse substrates when formulated AFFINITY™ GA 1900K Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), and masterbatch/additive carrier

- Ultra high clarity, low density, low viscosity polyolefin - Excellent thermal stability - Low Tg (Excellent low temperature properties) - Excellent flexibility - Non corrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - Low crystallinity (can be heavily filled) - Low density (better mileage) - Excellent adhesion to diverse substrates when formulated Complies with: - U.S. FDA FCN 424 Consult the regulations for complete details. AFFINITY* GA 1950 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives.

AFFINITY* HT1285G Polyolefin Plastomer (POP) is specifically designed as a high performance sealant for demanding packaging applications. AFFINITY HT 1285G provides high packaging integrity through improved hot tack strength, enhanced caulkability, superior seal though contamination, and low temperature seal initiation. It helps enable hermetic packaging on today's high speed packaging lines or with demanding substrates, and supports reducing sealant failure and potential related food waste. AFFINITY HT 1285G has been developed for processing on Cast, Blown, and Extrusion Coating film production lines. - High integrity sealant layer in flexible packaging - Low seal initiation temperature - Excellent hot tack strength - Excellent taste and odor profile - Superior seal through contamination Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

- Excellent inherent cling properties - Excellent optical properties - Excellent toughness properties Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objections Consult the regulations for complete details. AFFINITY* KC 8852G Polyolefin Plastomer (POP) is produced via INSITE* Technology. This resin is an ethyleneoctene copolymer that offers excellent performance as a cling resin in one-sided stretch cling film applications. This polyolefin plastomer provides excellent cling and optics, while offering outstanding toughness.

- High performance blown film resin for flexible packaging - Excellent abuse resistance - Low temperature seal initiation - Excellent optics - Outstanding high oxygen transmission rates Complies with: - U.S. FDA FCN 424 - Canadian HPFP No Objections - EU, No 10/2011 - U.S. FDA-DMF Consult the regulations for complete details. AFFINITY* PF 1140G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed to be used in a variety of demanding applications including form-fill-seal packaging and fresh produce bags. This resin has excellent compatibility with other polyolefins, allowing efficient blending and coextrusion.

AFFINITY* PF 1146 Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film, and to run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use as a sealant layer in multilayer films - For fresh-cut produce, dry foods and other high speed VFFS (Vertical Form-Fill-Seal) applications Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

AFFINITY* PF 1146Q Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film, and to run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use as a sealant layer in multilayer films - For fresh-cut produce, dry foods and other high speed VFFS (Vertical Form-Fill-Seal) applications Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 - HPFB (Canada), No Objection Consult the regulations for complete details.

- For food packaging - Excellent seal flexibility and strength properties Complies with: - U.S. FDA FCN 424 Consult the regulations for complete details.

AFFINITY™ PF 1766 Polyolefin Elastomer is an ethylene based Plastomer that offers superior impact properties for more demanding stretch hood film applications. Main Characteristics: - Pellet form - Excellent processability Applications: - Extrusion applications

AFFINITY™ PF 1788 Polyolefin Plastomer (POP) is an ethylene-based plastomer, offers excellent processing in extrusion applications with enhanced elasticity performance targeting for TPE glove application. Main Characteristics - Pellet form - Excellent processability - Excellent elasticity Applications: - TPE glove Consult the regulations for complete details.

AFFINITY* PF 7266 Polyolefin Plastomer is an ethylene based plastomer, offers excellent processing and performance in extrusion applications targeting for CPP film modification application. Main Characteristics: - Pellet form - Excellent processability Applications: - Extrusion applications

AFFINITY™ PL 1280G 聚烯烃塑性体是一种聚烯烃塑性体 (POP)，其制备采用了陶氏塑料事业部的INSITE™ 技术，专门用作肉类、奶酪、干货和消费类物品包装材料等软质结构中的密封剂层。由于其优异的低温热封性能、极限热粘强度、光学性能和强度，使其特别适宜于高速成型-灌装-热封包装生产线。 备注：在未经改性应用于食品接触领域时，该树脂符合美国联邦食品、药物和化妆品法案中对接触食品物质(FCN)的法规要求，其市场准入通知已经依据FCN 424从2004年10月7日开始生效。该食品接触认证通知允许该产品作为物品或者组分用于接触食品的物品的生产，这些食品种类参见美国食品和药物管理局法规 21 CFR § 176.170(c)表-2中使用条件A至H描述的所有种类。该产品的组分构成符合欧盟指令 EU, No 10/2011 制造商应该知晓那些含油量高的食物有可能会降低包装的完整性。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： 流延薄膜

AFFINITY* PL 1840G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed to provide blown film with low temperature sealability, good puncture resistance, optics and organoleptic properties. It also has excellent compatibility with other polyolefins, allowing efficient blending and coextrusion. - Outstanding low temperature sealability and toughness - Suitable as a sealant in liquid & dry food pouch applications Applications: - Blown Film Complies with: - Canadian HPFP No Objection - EU, No 10/2011 - U.S. FDA FCN 424 - U.S. FDA-DMF Consult the regulations for complete details.

AFFINITY™ PL 1845G 聚烯烃塑性体是一种采用陶氏塑料事业部的INSITE™ 技术制备的聚烯烃塑性体 (POP) ，专门用作流延加工中软质结构的密封层。其较低的热封起始、优异的光学性能以及其与聚丙烯聚合物可共挤出的特性使得AFFINITY PL 1845G 聚烯烃塑性体特别适宜于作为共挤出流延双向拉伸聚丙烯（BOPP）薄膜结构中的低热封起始温度密封层。 AFFINITY PL 1845G 聚烯烃塑性体不含任何滑爽剂或者防粘连剂。为了使其性能达到最优，建议加入基于聚烯烃塑性体的滑爽剂/防粘连剂母料。 备注： 在未经改性应用于食品接触领域时，该树脂符合美国联邦食品、药物和化妆品法案中对接触食品物质(FCN)的法规要求，其市场准入通知已经依据FCN 424从2004年10月7日开始生效。该食品接触认证通知允许该产品作为物品或者组分用于接触食品的物品的生产，这些食品种类参见美国食品和药物管理局法规 21 CFR § 176.170(c)表-2中使用条件A至H描述的所有种类。该产品的组分构成符合欧盟指令 EU, No 10/2011

AFFINITY* PL 1850G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed to provide blown and cast film products with low temperature sealability, excellent optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging. - High performance sealant layer in flexible packaging - Excellent optics, low temperature seal initiation and abuse resistance Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objectin - EU, No 10/2011 Consult the regulations for complete details.

AFFINITY* PL 1880G R Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package. - Low seal initiation temperature - Excellent hot tack strength - High performance sealant layer in flexible packaging Complies with: - U.S. FDA FCN 424 - U.S. FDA-DMF - U.S. USP 23 - HPFB No Objection (with limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene Plastics Association - ISCC Plus certification for renewable-based plastics Consult the regulations for complete details.

AFFINITY™ PL 1880G REN Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package. - Low seal initiation temperature - Excellent hot tack strength - High performance sealant layer in flexible packaging Complies with: - U.S. FDA FCN 424 - U.S. FDA-DMF - U.S. USP 23 - HPFB No Objection (with limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene Plastics Association - ISCC Plus certification for bio-circular plastics Consult the regulations for complete details.

AFFINITY* PL 1880G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package. - Low seal initiation temperature - Excellent hot tack strength - High performance sealant layer in flexible packaging Complies with: - U.S. FDA FCN 424 - U.S. FDA-DMF - U.S. USP 23 - HPFB No Objection (with limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene lastics Association Consult the regulations for complete details.

AFFINITY* PL 1881G R Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products. - Excellent ultimate hot tack strength - Low temperature sealability - Ability to seal through contamination - Outstanding optics Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objection (with limitations) - EU, No 10/2011 - ISCC Plus certification for renewable-based plastics Consult the regulations for complete details.

AFFINITY™ PL 1881G REN Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products. - Excellent ultimate hot tack strength - Low temperature sealability - Ability to seal through contamination - Outstanding optics Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objection (with limitations) - EU, No 10/2011 - ISCC Plus certification for bio-circular plastics Consult the regulations for complete details.

AFFINITY* PL 1881G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products. - Excellent ultimate hot tack strength - Low temperature sealability - Ability to seal through contamination - Outstanding optics Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objection (with limitations) - EU, No 10/2011 Consult the regulations for complete details.

AFFINITY* PL 1888G Polyolefin Plastomer for Packaging films is used for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film and run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use in monolayer films and as the sealant layer in multilayer films - For fresh-cut produce, meat, cheese, and other high speed packaging applications requiring good machinability - Fast processing on narrow die gaps Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

- Monolayer and coextrusion coating for packaging applications - Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant) - Coextruded with acid copolymer as a cost effective foil or PET sealant - Complies with U.S. FDA - Consult the regulations for complete details. (See NOTES) AFFINITY™ PT 1450G1 Polyolefin Plastomer is produced via INSITE™ Technology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to (OPP) and good taste and odor performance. Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

- Monolayer and coextrusion coating for packaging applications - Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant) - Coextruded with acid copolymer as a cost effective foil or PET sealant - Complies with U.S. FDA - Consult the regulations for complete details. (See notes) AFFINITY PT 1450G1P Polyolefin Plastomer is produced via INSITE™ echnology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to OPP and good taste and odor performance. Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

AFFINITY™ PT 1451G1 Polyolefin Plastomer (POP) produced using INSITE™ Technology from Dow, is specifically designed for extrusion coating and other cast extrusion processing. AFFINITY PT 1451G1 Polyolefin Plastomer is a tough and high performance and low temperature sealant. Its ease of processability in combination with other common extrusion coating polyolefins, i.e. LDPE or acid copolymers, provides optimum sensory performance. The high clarity and adhesion to PP makes coatings of AFFINITY PT 1451G1 Polyolefin Plastomer fit for use in combination with OPP or primed PET high clarity films. Coextrusions of AFFINITY PT 1451G1 Polyolefin Plastomer with acid copolymers for adhesion to foil offer cost effective high performance sealant structures with exceptional potential for source reduction. Note: AFFINITY PT 1451G1 Polyolefin Plastomer should comply with FDA regulation 21 CFR 177.1520 (c) 3.2c and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact your nearest Dow office regarding food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: Flexible packaging

AFFINITY™ SL 8110G 聚烯烃塑性体的制备采用了INSITE™ 技术。 AFFINITY SL 8110G 聚烯烃塑性体已经应用于吹塑拉伸薄膜加工，在与其他树脂共挤出时被用作表层材料。它具有优异的延伸性能和自粘性能以及良好的物理性能。 由于其熔融温度低， AFFINITY SL 8110G适宜于批次生产包装袋。 在未经改性应用于食品接触领域时，该树脂符合美国联邦食品、药物和化妆品法案中对接触食品物质(FCN)的法规要求，其市场准入通知已经依据FCN 424从2004年10月7日开始生效。该食品接触认证通知允许该产品作为物品或者组分用于接触食品的物品的生产，这些食品种类参见美国食品和药物管理局法规 21 CFR § 176.170(c)表-2中使用条件A至H描述的所有种类。该产品的组分构成符合欧盟指令2002/72/EC有关接触食品的规定。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 吹塑拉伸和预拉伸薄膜中的自粘层 - 包装袋的批次生产

AFFINITY™ SQ 1503 UE 聚烯烃塑性体是一种采用INSITE™工艺技术制备的聚烯烃塑性体 (POP)。 AFFINITY SQ 1503 UE 聚烯烃塑性体是专用于滚塑应用的。其脱模容易而且具有柔软性和弹性回复性能，这些一般是诸如EBA、EVA和塑化PVC等极性共聚物才具有的性能。 加工性能和稳定性：POP本有的稳定性使其更加耐热以及耐紫外线，从而使其加工范围很宽、保色性能良好而且使用时间长。 供货形态： 所提供的AFFINITY SQ 1503 UE 聚烯烃塑性体是一种可以自由流动的粉末材料，尺寸在500微米。 应用领域： - 浮标 - 围栏 - 道路设施 符合以下法规要求： - 欧盟EU， No 10/2011 - 美国食品和药品管理局U.S. FDA FCN 424 请查阅法规以获取详尽资料。

AFFINITY™ VP 8770G1 聚烯烃塑性体是一种采用INSITE™技术制备的聚烯烃塑性体 (POP)。 AFFINITY VP 8770G1 聚烯烃塑性体具有非常高的透明度和柔软性。它已经被用于流延薄膜加工，但是这种树脂亦可应用于更厚的薄膜挤出和异型材挤出加工。 该树脂与其他聚烯烃具有优异的相容性。 备注： 在未经改性应用于食品接触领域时，该树脂符合美国联邦食品、药物和化妆品法案中对接触食品物质(FCN)的法规要求，其市场准入通知已经依据FCN 424从2004年10月7日开始生效。该食品接触认证通知允许该产品作为物品或者组分用于接触食品的物品的生产，这些食品种类参见美国食品和药物管理局法规 21 CFR § 176.170(c)表-2中使用条件A至H描述的所有种类 - EU, No 10/2011 。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 在中等程度的填料添加水平进行流延或者压制板加工 - 流延薄膜和片材 - 异型材挤出加工

COHERE™ Metallocene Polyolefin Plastomer (POP) 8102 is an ethylene-octene copolymers produced via solution polymerization using metallocene catalyst. It performs well in high performance LLDPE blown film applications with an excellent combination of toughness, hot tack, sealing and optical properties.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8102L is an ethylene-octene copolymers produced via solution polymerization using metallocene catalyst. It performs well in high performance LLDPE blown film applications with an excellent combination of toughness, hot tack, sealing and optical properties. It contains slip and antiblock additives.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8170D is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8185 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in high performance film applications with outstanding gel control, and an excellent combination of toughness, hot tack, sealing and optical properties.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8380 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8402 grade is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well high performance LLDPE cast film and deliver outstanding toughness optics. SABIC® COHERE™ 8402 provides excellent performance as cling layer in stretch wrap film.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8570D is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.