热塑性弹性体(TPE) by HEXPOL TPE
产品 | 可用性 | 产品说明 |
---|---|---|
Dryflex® SE 45A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 45A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 50A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 50A001N U | 北美洲 |
Dryflex SE 50A001N U: Thermoplastic Elastomer
Base Material: TPS-SEBS
Hardness: 50 Shore A
Service Temperature Range: -50 to +125°C (Unstressed Material)
Colour: Translucent, but can easily be coloured in any shade
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Excellent
Ozone / UV Resistance: Excellent
Chemical Resistance: Good (Excluding organic solvents, aromatic and vegetable oils)
Recycling: 100% Recyclable
Mould Shrinkage: Approximately 0.75 - 2% depending on shape of the detail and placement of the gate
Bonds to: PP, PE
|
Dryflex® SE 50A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 50A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 52113 N | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: 100% recyclable
|
Dryflex® SE 52114 N | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: 100% recyclable
|
Dryflex® SE 52341 W | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: White
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: 100% recyclable
|
Dryflex® SE 52411 N | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: Recyclable in closed-loop systems
|
Dryflex® SE 52412 N | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: Recyclable in closed-loop systems
|
Dryflex® SE 52477 N | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: Recyclable in closed-loop systems
|
Dryflex® SE 52503 N | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: Recyclable in closed-loop systems
|
Dryflex® SE 52504 N | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Translucent, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: Recyclable in closed-loop systems
|
Dryflex® SE 55A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 55A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 55A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 60A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 60A001B | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Black
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: 100% recyclable
|
Dryflex® SE 60A001N U | 北美洲 |
Description: Thermoplastic Elastomer, TPS-SEBS
Colour: Translucent, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: 100% recyclable
|
Dryflex® SE 60A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 60A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 60A301N U | 北美洲 |
Dryflex SE 60A301N U: Thermoplastic Elastomer
Base Material: TPS-SEBS
Hardness: 60 Shore A
Service Temperature: -50°C to +125°C (Unstresses Material).
Colour: Natural, but available in any colour shade
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Excellent
Ozone-/UV- Resistance: Excellent
Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils)
Recycling: 100% recyclable
Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate
Bonds to: PP, PE
|
Dryflex® SE 65A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 65A001N U | 北美洲 |
Dryflex SE 65A001N U: Thermoplastic Elastomer
Base Material: TPS-SEBS
Hardness: 60 Shore A
Service Temperature Range: -50 to +125°C (Unstressed Material).
Colour: Translucent, but can easily be coloured in any shade
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Excellent
Ozone / UV Resistance: Excellent
Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils)
Recycling: 100% recyclable
Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate
Bonds to: PP, PE
|
Dryflex® SE 65A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 65A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 70A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 70A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 70A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 75A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 75A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 75A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 80A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 80A001N U | 北美洲 |
Dryflex SE 80A001N U: Thermoplastic Elastomer
Base Material: TPS-SEBS
Hardness: 80 Shore A
Service Temperature Range: -50 to +125°C (Unstressed Material)
Colour: Translucent, but can easily be coloured in any shade
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Excellent
Ozone / UV Resistance: Excellent
Chemical Resistance: Good (Excluding organic solvents, aromatic and vegetable oils)
Recycling: 100% Recyclable
Mould Shrinkage: Approximately 0.75 - 2% depending on shape of the detail and placement of the gate
Bonds to: PP, PE
|
Dryflex® SE 80A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 80A301 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times.
Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 80A301N U | 北美洲 |
Dryflex SE 80A301N U: Thermoplastic Elastomer
Base Material: TPS-SEBS
Hardness: 80 Shore A
Service Temperature: -50 to +125°C (Unstressed Material).
Colour: Natural, but available in any colour shade
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Excellent
Ozone-/UV- Resistance: Excellent
Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils)
Recycling: 100% recyclable
Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate
Bonds to: PP, PE
|
Dryflex® SE 85A001 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series.
Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|
Dryflex® SE 85A201 | 北美洲 |
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding.
We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum.
The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance.
Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.
|