Injection & extrusion molding grade. For molded products with superior rigidity, and good surface appearance. It is supplied in pellet form. Containers, stationery goods, toys, and consumer goods.

Injection molding grade. For molded products with superior balance of high-level impact strength and rigidity, maximum transparency, and good surface appearance. It is supplied in pellet form. Food containers, cosmetics caps, pencil cases and other stationery goods, toys, swim goggle and other cases, consumer goods

Film and sheet grade. Styrenic resins modifier, for high impact strength. Small-quantity addition to GPPS (general-purpose polystyrene) for sheets with good hinge characteristics and films with good elongation characteristics. Inflation and sheet extrusion capability. It is supplied in pellet form. Blended with GPPS for PSP* laminated, blister packs, and other films. Also as modifier to heighten deep-drawing performance, for frozen dessert cups and lids, and transparent cold-drink cups.

Sheet grade. Blended with SC*, for highly transparent sheets. It is supplied in pellet form. Blended with SC* for transparent blister packs and other sheets, with GPPS for frozen dessert cups and other containers, and with GPPS/Tufprene™ to obtain PS sheets for food containers and other applications. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 815 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Injection- and blow-molding grade. For transparent products with superior impact strength. Blended with GPPS (general-purpose polystyrene) or SC*, for films with good thermal stability. Capability for profile-extrusion products. It is supplied in pellet form. Cosmetics caps, stationery goods, other consumer goods. Blended with GPPS for PSP* laminate films and IC magazine rails, and with SC* for shrink films. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 825 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS.

Film and sheet extrusion grade. Blended with SC*, for films with good balance of performance characteristics. Capability for inflation and sheet extrusion. It is supplied in pellet form. In blends with GPPS, for IC carrier tapes. In blends with SC, for shrink films. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 830 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Sheet extrusion grade. Blended with SC*, for sheets with high transparency and high impact resistance. It is supplied in pellet form. In blends with GPPS, for dessert cups. In blends with SC, for blister packs and shrink films with high transparency and high impact strength. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 835 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Injection molding, inflation molding, and sheet extrusion grade. Blended with GPPS (general-purpose polystyrene) or SC*, for products with well-balanced performance characteristics and good thermal characteristics. It is supplied in pellet form. In blends with GPPS, for PSP* laminate films. In blends with SC, for shrink films and other products. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 840 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS .

Sheet extrusion grade. Highly compatible with GPPS (general-purpose polystyrene), for sheets with superior balance of transparency and impact resistance. Superior processability, enabling production of deep-draw containers and other products. It is supplied in pellet form. In blends with GPPS, sheets for drink cups and food containers, and IC magazine rails. Used alone for gardening ampoules and other products.

High molecular weight, for enhanced adhesive characteristics in pressure-sensitive and other adhesives and heightened softening point in asphalts. It is supplied in crumb or powder form.

Low solution viscosity designed for pressure-sensitive and other adhesives modification. High level of processability in asphalt modification. It is supplied in crumb or powder form.

Specifically developed for superior characteristics and performance in asphalt blends. It is supplied in crumb form.

Specifically developed for superior characteristics and performance in pressure-sensitive and other adhesives, marked by good processability through low viscosity and a high level of balanced characteristics. It is supplied in pellet form.

Specifically developed for superior characteristics and performance in pressure-sensitive and other adhesives, marked by good processability through low viscosity and a high level of balanced characteristics. It is supplied in pellet form.

Asahi Kasei S.O.E.™ L609 can improve resilience, abrasion resistance and anti-abrasion property for TPO, EVA, and EEA.

Asahi Kasei S.O.E.™ S1605 is a special SEBS with low resilience. It can be used as a modifier to improve scratch resistance and abrasion resistance of TPE compounds. It also offers good compatibility between PS and polyphenylene ether (PPE).

Asahi Kasei S.O.E.™ S1606 is a special SEBS with low resilience. It can be used as a modifier to improve scratch resistance and abrasion resistance of TPE compounds. It also offers good compatibility between PS and polyphenylene ether (PPE). It is also used as a modifier of COP and COC.

Asahi Kasei S.O.E.™ S1611 is a special SEBS with low resilience. It is particularly used as a modifier to lower resilience and enhance shock absorption of foam made from EVA or TPO for shoe mid soles, sports gears or sports wears.

S.O.E.™ is a new hydrogenated styrenic elastomer based on Asahi's advanced polymerization and hydrogenation technologies, that open the way to new concepts, developments, and solutions in plastic products. Its unique characteristics have brought fast-rising demand in rapidly expanding applications.

Styrene/butadiene block copolymer with enhanced styrenic resins compatibility for heightened impact strength. High flowability. It is supplied in pellet form. Applications: Styrenic resins modifier, imparting increased impact strength, mainly for food containers.

Styrene/butadiene block copolymer with enhanced styrenic resins compatibility for heightened impact strength. Superior antiblocking property. Flexible container delivery available. It is supplied in pellet form. Styrenic resins modifier, imparting increased impact strength, mainly for food containers.

The basic grade in the broad range of styrene-butadiene block copolymers from Asahi Kasei. A styrenic thermoplastic elastomer with superior elasticity, styrenic resins compatibility, moldability, adhesive performance, and asphalt blend characteristics. It is supplied in pellet form. Applications: Styrenic resins modifier, imparting increased impact strength, for food containers. Also used as adhesives and sealants component, and as asphalt modifier for reduced temperature sensitivity and heightened cohesive and adhesive strength.

Low molecular weight and thus low viscosity; therefore preferred especially for applications demanding high processability and high flowability. It is supplied in pellet form. Olefinic resins modifier, for high impact strength. Compatibilizer. Adhesives and sealants component.

Asahi Kasei Tuftec™ H1041 is good for easy peel film application. It can be also used as a modifier for a variety of plastics with its superior balance of mechanical property and melt flowability. Olefinic and styrenic resins modifier, for high impact strength. Compatibilizer. Adhesives and sealants component. Base polymer of SEBS molding compounds.

Asahi Kasei Tuftec™ H1043 is a high styrene content SEBS. It can be easily blended with PS and PPE. It is used as a compatibilizer of styrenic resin/olefinic resin blends. It is also suited as an impact modifier of cyclo olefin polymer (COP) and cyclo olefin copolymer (COC). Applications: PS(GPPS, HIPS)/PP alloy compatibilizer; preserves PS processability while increasing resistance to heat and oil, and thus used for food containers and trays, and in place of ABS. Effective as additive to PS for recycling. Also effective as modifier for enhancement of SAN, ABS, PPE, and other resins. E.g. microwavable food containers, inner laminate films for lunch boxes and trays, portioned food containers.

Asahi Kasei Tuftec™ H1051 offers good compatibility for styrenic resins and polyphenylene ether (PPE). It's also used as impact modifier for cyclo olefin polymer (COP) and Cyclo Olefin copolymer (COC). Olefinic and styrenic resins modifier for high impact strength, e.g. IC trays. Compatibilizer. Adhesives and sealants components.

Asahi Kasei Tuftec™ H1052 shows moderate adhesion and is good for adhesive layer of protective films by multi-layer extruding process or easy peel films. It is also used as an impact modifier of polypropylene (PP). Its excellent stretch property provides stretch films such as food wrapping film. Applications: Adhesives and sealants components. Olefinic and styrenic resins modifier for high impact strength. Compatibilizer. Flexible films. Base polymer for SEBS compounds.

Asahi Kasei Tuftec™ H1062 is designed for an impact modifier of polypropylene (PP). It provides good balance of properties and can improve impact resistance property at room and low temperature. H1062 can be used as an additive to enhance heat sealability of PP film. Applications: Primarily as modifier of PP for automotive exteriors and interiors. Also effective as modifier of PP for other various applications, particularly those requiring elongation and low-temperature performance, as base polymer of SEBS compounds, and as adhesives and sealants component. E.g. elastic ribbon films, no-coat airbag covers, bumpers.

Specially designed as a modifier and compatibilizer for polypropylene (PP). Ultrafine dispersion in PP, due to outstanding compatibility, enabling production of transparent sheets and films with excellent flexibility and resistance to hazing or whitening under bending or folding. It is supplied in pellet form. Excellent substitute for PVC, due to unique combination of transparency and flexibility of PP/H1221 blends. Transparent apparel packaging and carrying cases. Folders and toys, enabled by flexibility and absence of hazing and whitening at folds and bends. Soft, comfortable surface feel, enabling excellent elastic films for bag liners, tarpaulins, signboards, other products. Compatibilizer. Basepolymer for SEBS molding compounds. Adhesives and sealants component.

Di-/tri-block polymer structure obtained by advanced coupling technology; di-block providing good flowability, and tri-block providing a superior balance of performance characteristics. It is supplied in pellet form. Olefinic resins modifier, for high impact strength. Compatibilizer. Adhesives and sealants component.

Asahi Kasei Tuftec™ H1221 is specially designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1221 ultra-finely dispersed into PP. PP and H1221 blends provide transparent PP sheets and films with excellent flexibility and resistance to hazing or whitening on bending. The excellent adhesion is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1221 meets USP Class VI standards. It may be used for medical applications after a special agreement with Asahi Kasei. Applications: Excellent substitute for PVC due to unique combination of transparency and flexibility of PP/H1221 blends. Transparent apparel packaging and carrying cases. Folders and toys, enabled by flexibility and absence of hazing and whitening at folds and bends. Soft, comfortable surface feel, enabling excellent elastic films for bag liners, tarpaulins, signboards, and other products. Compatibilizer. Base polymer for SEBS molding compounds. Adhesives and sealants component. Substrates of fastening tapes for protective sheets, logos, lines on sportswear, sports shoes, transparent tote bags, waterproof bags linings, tarpaulins, work aprons, and diaper backing sheets.

Asahi Kasei Tuftec™ H1272 is oil-extended high-molecular-weight grade which is used as impact modifier for PPO and a base material for SEBS compounds. Applications: Engineering plastics modifier for high impact strength. Compatibilizer. Base polymer for SEBS molding compounds. E.g. IC trays, grips for ski stocks, no-coat airbag covers.

Asahi Kasei Tuftec™ H1517 offers good compatibility for styrenic resin and polyphenylene either (PPE). It is also suited as impact modifier for cyclo olefin polymer (COP) and cyclo olefin copolymer (COC). It is particularly suited as compatibilizer of PP/PPE or polystyrene (PS) blend.

Asahi Kasei Tuftec™ Trial L521 is particularly designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes L521 super-finely dispersed into PP. PP and L521 blends provides transparent and flexible extruded products such as sheets, films and tubes. The blends are also applicable to injection molding due to its high MFR. It has excellent adhesion, which is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. L521 meets USP Class VI standards. It may be used for medical applications after a special agreement with Asahi Kasei.

Asahi Kasei Tuftec™ M1911 is a maleic anhydride modified SEBS. It enables modification of engineering plastics such as polyamide (PA) or Polyester(PEs). It can be used as an adhesive to metals and thermoplastic polyurethane ITPU). It is also used as a compatibilizer of PS or olefinic resins and polar resins. Applications: Modification of polyamides (PA) and other engineering plastics for high impact strength. Compatibilization. Adhesives and sealants components.

Asahi Kasei Tuftec™ M1913 is a maleic anhydride modified SEBS. It enables modification of engineering plastics such as polyamide (PA) or polyester(PEs). It can be used as an adhesive to metals and thermoplastic polyurethane (TPU). It is also used as a compatibilizer of PS or olefinic resins and polar resins. Applications: Modifications of polyamides (PA) and other engineering plastics for high impact strength. Compatibilization. Adhesives and sealants component.

Asahi Kasei Tuftec™ M1943 is a maleic anhydride modified SEBS. It enables modification of engineering plastics such as polyamide (PA) or polyester (PEs). It can be used as an adhesive to metals and thermoplastic polyurethane (TPU). It is also used as a compatibilizer of PS or olefinic resins and polar resins. Applications: Modification of polyamides (PA), other engineering plastics, and olefinic resins for high impact strength, e.g. automotive carpet backings. Compatibilization with engineering plastics and olefinic resins. Flexible films component. Adhesives and sealants components.

Asahi Kasei Tuftec™ MP10 is amine-modified SEBS. MP10 can be used as a modifier for engineering plastics such as polyamide (PA) or polyester (PEs), polylactic acid (PLA) and thermoplastic polyurethane (TPU). It is particularly suitable for an adhesive to TPU. It is also used as a compatibilizer of PS or olefinic resin and polar resins. It shows excellent adhesion to inorganic fillers, which can achieve good dispersion of inorganic fillers into plastics.