Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 7000 Technical compaund on SBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60° C. - For aplications with no explicite exposure to the light (UV) and higher temperatures. 7000 A - Injectionmoulded product of general use.

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 7000 Technical compaund on SBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60° C. - For aplications with no explicite exposure to the light (UV) and higher temperatures. 7000B - Transparent injection moulded product

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 7000 Technical compaund on SBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60° C. - For aplications with no explicite exposure to the light (UV) and higher temperatures. 7000C - Replace for TPU

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 7000 Technical compaund on SBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60° C. - For aplications with no explicite exposure to the light (UV) and higher temperatures. 7000 D - Extrusion of static washers for windows and doors.

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 8000 Technical compaund on SBS + SEBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60°C, very shortly up to +80°C - For aplication with higher coloral stability of the product under light exposure. - Approved stability to higher temperatures at shortime loads. 8000 A - Injection moulded products

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 8000 Technical compaund on SBS + SEBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60°C, very shortly up to +80°C - For aplication with higher coloral stability of the product under light exposure. - Approved stability to higher temperatures at shortime loads. 8000B - Injection moulded project - Washers for pipes

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 8000 Technical compaund on SBS + SEBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60°C, very shortly up to +80°C - For aplication with higher coloral stability of the product under light exposure. - Approved stability to higher temperatures at shortime loads. 8000C - Extrusion of washers for internal and partly external use.

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 8000 Technical compaund on SBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between - 50 in + 60° C. - For aplications with no explicite exposure to the light (UV) and higher temperatures. 8000D - Injection moulding of ski-boots and tech applications

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 9000 Technical compaund on SEBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between -50°C and 80°C, very shortly up to 110°C. - Due to their saturated chemical structure are very useful for wide spectrum of products, where high stability to the light and weather impact is requireing. - It can replace PVC, vulcanised rubber or TPE-V very well, in mentioned field of use. 9000A - Injection moulded product of the general usage for external and internal use.

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 9000 Technical compaund on SEBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between -50°C and 80°C, very shortly up to 110°C. - Due to their saturated chemical structure are very useful for wide spectrum of products, where high stability to the light and weather impact is requireing. - It can replace PVC, vulcanised rubber or TPE-V very well, in mentioned field of use. 9000 B - Injection moulded products - transparent.

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 9000 Technical compaund on SEBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between -50°C and 80°C, very shortly up to 110°C. - Due to their saturated chemical structure are very useful for wide spectrum of products, where high stability to the light and weather impact is requireing. - It can replace PVC, vulcanised rubber or TPE-V very well, in mentioned field of use. 9000 C - Extrusion of all kinds of washers for external and internal use.

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... - Resistance to acid, bases and all aqueous solutions is excellent. - Resistance to alcohol and glycols is medium good. - Resistance to aromatic hydrocarbons, fat and of oil is bad. - Resistace round series upwards loosely increases. - All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. - For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 9000 Technical compaund on SEBS block copolymers base; - Different phisical characteristics and optics considering purpose of use. - Work temperature between -50°C and 80°C, very shortly up to 110°C. - Due to their saturated chemical structure are very useful for wide spectrum of products, where high stability to the light and weather impact is requireing. - It can replace PVC, vulcanised rubber or TPE-V very well, in mentioned field of use. 9000 D - 2 K injection moulding to polar and unpolar layers.