Europrene® N 1945 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 1945 GRN is the grade with the best low temperature properties in Europrene N family. As all GRN grades it shows higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be further improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Injected or extruded technical goods requiring oil resistance and very good low temperature flexibility. Food contact applications.

Europrene® N 2830 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 2830 GRN is characterised by a low Mooney Viscosity that allows an excellent processability mostly in injection moulding applications. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Automotive and industrial seals, textile industry articles, oil industry holds, stoppers, stamps, dampers.

Europrene ® N 2845 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Key Features Europrene® N 2845 GRN is characterised by excellent processability and tear resistance at high temperature. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Main Applications Grade with faster cure rate compared to equivalent standard type. Suitable for injection applications (low mould fouling)

Europrene® N 2845 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 2845 is characterised by good processability, medium mineral oil resistance and good flexibility at low temperature. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Automotive and industrial seals, textile industry articles, oil industry holds, stoppers, stamps, dampers.

Europrene® N 2860 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 2860 GRN is characterised by excellent processability and tear resistance at high temperature, good dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Grade with faster cure rate compared to equivalent standard type. Suitable for injection applications (low mould fouling)

Europrene® N 2860 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 2860 is characterised by good processability, medium mineral oil resistance, and good flexibility at low temperature.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Applications requiring elasticity at low temperature, oil resistance and high mechanical performances.

Europrene® N 2875 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 2875 GRN is characterised by excellent tear resistance at high temperature, excellent dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Foamed insulation tubes. Grade with faster cure rate compared to equivalent standard type. Suitable for injection applications (low mould fouling).

Europrene® N 3330 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3330 GRN is characterised by a low Mooney Viscosity that allow and excellent processability mostly in injection moulding applications. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. All injection moulding applications (low mould fouling).

Europrene® N 3330 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3330 is characterised by good processability, good mineral oil resistance, and medium flexibility at low temperature. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Wide range of oil resistant technical articles obtained by injection moulding.

Europrene® N 3345 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3345 GRN is characterised by excellent processability and tear resistance at high temperature. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. All injection moulding applications (low mould fouling).

Europrene® N 3345 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3345 is characterised by good processability, good mineral oil resistance, and medium flexibility at low temperature. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Wide range of oil resistance technical articles: seals, industrial shoes soles,seals, technical goods, etc.

Europrene® N 3360 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3360 is characterised by good processability, good mineral oil resistance, and medium flexibility at low temperature. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Technical goods with high mechanical properties requiring good mineral oil resistance and medium low temperature flexibility.

Europrene® N 3380 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3380 GRN is characterised by excellent tear resistance at high temperature, excellent dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Technical goods with outstanding mechanical properties, very low compression set and oil resistance.

Europrene® N 3380 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3380 is characterised by good mineral oil resistance, and medium flexibility at low temperature. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Technical goods with outstanding mechanical properties, very good compression set and oil resistance.

Europrene® N 3945 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3945 GRN is characterised by excellent processability and tear resistance at high temperature, good dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls. The medium ACN content gives a very good compromise to get both low temperature flexibility and oil resistance. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Wide range of technical articles requiring good processability and a very high oil and fuel resistance. Suitable for injection applications (low mould fouling).

Europrene® N 3945 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. The high ACN content confers to compounds based on Europrene® N 3945 good hardness properties and good oil and aliphatic hydrocarbon swelling resistance. The vulcanization can be performed using a sulphur based systems or with peroxides.The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Wide range of technical articles requiring good processability and a very high oil and fuel resistance.

Europrene® N 3960 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. The high ACN content confers to compounds based on Europrene® N 3960 good hardness properties and good oil and aliphatic hydrocarbon swelling resistance. The vulcanization can be performed using sulphur based systems or with peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Applications requiring very high oil and fuel resistance and excellent mechanical properties.

Europrene® N 3980 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. The high ACN content confers to compounds based on Europrene® N 3980 good hardness properties and good oil and aliphatic hydrocarbon swelling resistance. The vulcanization can be performed by sulphur based systems or with peroxides.The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Applications requiring very high oil and fuel resistance and excellent mechanical properties.

Europrene® N 4560 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 4560 is characterised by the highest oil and aliphatic hydrocarbon swelling resistance among the Europrene N grades. Mechanical properties decay of articles based on this elastomer is very limited also after long contact time with fuels whereas permeability of vulcanised articles is very low. The vulcanization can be performed using sulphur based systems or with peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. If the finished rubber article requires particular resistance to heat, light and ozone resistance, then suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Gaskets for oil bath, transformers, fuel hoses, oil sealing rings, gaskets for hydrocarbon ducts, flat gaskets for carburettors, etc.

Europrene® SOL T 161B BA is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 161B BA is a block copolymer with radial molecular structure, providing excellent mechanical properties, high strength and elasticity in a wide range of formulated products. Main Applications Used in bitumen modification in waterproofing membranes and road paving applications. The polymer could be also used as a high strength base in formulated compounds for footwear and technical applications. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 161B BCA is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 161B BCA is a block copolymer with radial molecular structure, providing excellent mechanical properties, high strength and elasticity in a wide range of formulated products. Main Applications Used in bitumen modification in waterproofing membranes and road paving applications. The polymer could be also used as a high strength base in formulated compounds for footwear and technical applications. Sustainability Bio-Circular raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BCA products are provided with a sustainability declaration indicating the amount of Bio-Circular Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 161B is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 30 % wt. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 161B is a block copolymer with radial molecular structure, providing excellent mechanical properties, high strength and elasticity in a wide range of formulated products. Main Applications Bitumen modification for waterproofing membranes used in roofing and bridge insulation, road paving and pipe coating applications.

Europrene® SOL T 161C is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 30 % wt. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 161C is a block copolymer with radial molecular structure, providing excellent mechanical properties, high strength and elasticity in a wide range of formulated products. Main Applications Used in bitumen modification in waterproofing membranes and road pavement. The grade is also used in solvent based adhesives and in formulated compounds for footwear and technical applications.

Europrene® SOL T 166 BA is a linear block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 166 BA is a linear block copolymer, providing excellent dispersibility and processability, combined with high strength and elasticity. Main Applications Characterized by the excellent dispersibility and processability, the grade is widely used in adhesive formulated products, in compounding for both footwear and technical applications and as a toughening agent in polymer modification and plastic recycling. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 166 BCA is a linear block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 166 BCA is a linear block copolymer, providing excellent dispersibility and processability, combined with high strength and elasticity. Main Applications Characterized by the excellent dispersibility and processability, the grade is widely used in adhesive formulated products, in compounding for both footwear and technical applications and as a toughening agent in polymer modification and plastic recycling. Sustainability Bio-Circular raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BCA products are provided with a sustainability declaration indicating the amount of Bio-Circular Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 166 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 30 % wt. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 166 is a linear block copolymer, providing excellent dispersability and processability, combined with high strength and elasticity. Main Applications Characterized by the excellent dispersability and processability, the grade is widely used in adhesive formulated products, in compounding for both footwear and technical applications and as a toughening agent in polymer modification and plastic recycling. The grade is also suitable for bitumen modification in both waterproofing membranes and road pavement applications.

Europrene® SOL T 172 C BA is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt. The polymer is extended with a clear paraffinic oil (45 phr). A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 172 C BA is a block copolymer with radial molecular structure, where the oil addition allows extremely good flow characteristics and an easy processability. The grade provides excellent mechanical properties and outstanding abrasion resistance, in a wide range of formulated products. The clear paraffinic oil allows to get finished items with excellent color stability. Main Applications Used as a high strength base in formulated compounds for footwear and technical applications, the grade is also used in the modification of polymers and in plastic recycling. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 172 C BCA is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt. The polymer is extended with a clear paraffinic oil (45 phr). A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 172 C BCA is a block copolymer with radial molecular structure, where the oil addition allows extremely good flow characteristics and an easy processability. The grade provides excellent mechanical properties and outstanding abrasion resistance, in a wide range of formulated products. The clear paraffinic oil allows to get finished items with excellent color stability. Main Applications Used as a high strength base in formulated compounds for footwear and technical applications, the grade is also used in the modification of polymers and in plastic recycling. Sustainability Bio-Circular raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BCA products are provided with a sustainability declaration indicating the amount of Bio-Circular Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 172 C is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt. The polymer is extended with a clear paraffinic oil (45 phr). A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 172 C is a block copolymer with radial molecular structure, where the oil addition allows extremely good flow characteristics and an easy processability. The grade provides excellent mechanical properties and outstanding abrasion resistance, in a wide range of formulated products. The clear paraffinic oil allows to get finished items with excellent color stability. Main Applications Used as a high strength base in formulated compounds for footwear and technical applications, the grade is also used in the modification of polymers and in plastic recycling.

Europrene® SOL T 177 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 50 % wt. The polymer is extended with a clear paraffinic oil (40 phr). A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 177 C is a block copolymer with radial molecular structure, providing excellent mechanical properties, high strength and elasticity in a wide range of formulated products. The clear paraffinic oil allows an outstanding color stability in the finished items. Main Applications Used as a high strength base in formulated compounds for footwear, the grade is specifically designed for high hardness compounds.

Europrene® SOL T 190 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 25 %. A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 190 is an easy processable, general purpose grade, characterised by an optimum balance of adhesive and cohesive properties. Main Applications The polymer is designed for hot melt pressure-sensitive adhesive applications. Europrene® SOL T 190 is also used in bitumen modification when enhanced adhesive properties are required.

Europrene® SOL T 6205 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 25 % wt and diblock content is 15%. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6205 is a block copolymer with radial molecular structure and low styrene content. The grade provides easy processability and excellent mechanical properties and elasticity. Main Applications Europrene® SOL T 6205 is designed for the modification of bitumen in road paving applications. The easy processability and the excellent compatibility with bitumen, greatly improve the binders performance, particularly at low service temperatures.

Europrene® SOL T 6302 BA is a linear block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6302 BA is a linear block copolymer, providing excellent mechanical properties, high strength and elasticity, combined with good dispersibility and processability. Main Applications Used in bitumen modification, particularly in road paving applications, in compounding for both footwear and technical goods. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 6302 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 30 % wt. A non-staining antioxidant system is added during the production process. . Key Features Europrene® SOL T 6302 is a linear block copolymer, providing excellent mechanical properties, high strength and elasticity, combined with good dispersability and processability. Main Applications Used in bitumen modification application, particularly in road paving, in compounding application for both footwear and technical goods.

Europrene® SOL T 6306 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 37 % wt. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6306 is a block copolymer designed for bitumen modification in waterproofing membranes applications. The grade imparts excellent mechanical properties and elasticity to the modified bitumen. The radial structure and the high styrene block content assure outstanding performance under service conditions, particularly in the high temperature range. Main Applications Bitumen modification in waterproofing systems, formulated compounds for shoe soles and technical goods

Europrene® SOL T 6320 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt and diblock content is 75 %. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6320 is a linear block copolymer, characterised by excellent dispersability and extremely easy processability. Main Applications Designed for bitumen modification, where high compatibility and easy dispersability are requested, Europrene® SOL T 6320 provides very low viscosity to bituminous binders. The high diblock content also assures excellent performance in adhesive applications, including bituminous self adhesive membranes. Characterized by the excellent processability, SOL T 6320 can be used in polymer modification and plastic recycling.

Europrene® SOL T 6414 BA is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6414 BA is a radial block copolymer, characterized by excellent dispersibility, processability and thermooxidative resistance, combined with high strength, elongation and hardness. Main Applications Europrene® SOL T 6414 BA is designed for hot melt adhesive applications: the grade shows high compatibility with tackifiers and imparts low melt viscosities and an excellent balance of adhesive and cohesive properties to the hot melt products. The grade is also used in footwear compounds. Characterized by the excellent processability, SOL T 6414 BA is widely used in the modification of styrenic polymers and in plastic recycling. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 6414 BCA is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6414 BCA is a radial block copolymer, characterized by excellent dispersibility, processability and thermooxidative resistance, combined with high strength, elongation and hardness. Main Applications Europrene® SOL T 6414 BCA is designed for hot melt adhesive applications: the grade shows high compatibility with tackifiers and imparts low melt viscosities and an excellent balance of adhesive and cohesive properties to the hot melt products. The grade is also used in footwear compounds. Characterized by the excellent processability, SOL T 6414 BCA is widely used in the modification of styrenic polymers and in plastic recycling. Sustainability Bio-Circular raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BCA products are provided with a sustainability declaration indicating the amount of Bio-Circular Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products.

Europrene® SOL T 6414 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 40 % wt and diblock content is 22%. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6414 is a radial block copolymer, characterised by excellent dispersability, processability and thermo-oxidative resistance, combined with high strength, elongation and hardness. Main Applications Europrene® SOL T 6414 is designed for hot melt adhesive applications: the grade shows high compatibility with tackifiers and imparts low melt viscosities and an excellent balance of adhesive and cohesive properties to the hot melt products. The grade is also used in footwear compounds, particularly where smooth and glossy surface finishing is required. Characterized by the excellent processability, SOL T 6414 is widely used in the modification of polymers and in plastic recycling.

Europrene® SOL T 9113 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 18 % wt and diblock content is 8 %. A non-staining, TNPP free antioxidant system is added during the production process. Key Features Europrene® SOL T 9113 is a block copolymer with linear molecular structure and low diblock content, designed for adhesive applications where very high cohesion and excellent thermal stability are required. Main Applications Hot-melt pressure sensitive adhesive applications