热塑性聚氨酯 (TPU): TPU-Capro
产品 | 可用性 | 产品说明 |
---|---|---|
ESTANE® D91T80 NAT 01 | 非洲和中东 |
Type: Aliphatic polycaprolactone based Thermoplastic Polyurethane (TPU) with a 81 Shore A Hardness.
Features: Translucent resin with excellent colour stability upon UV exposure
Uses: Injection moulding outdoor applications.
|
ESTANE® D91T86 NAT 01 | 非洲和中东 |
Type: Aliphatic polycaprolactone based Thermoplastic Polyurethane (TPU) with a 88 Shore A Hardness.
Features: Translucent resin with excellent colour stability upon UV exposure
Uses: Injection moulding outdoor applications.
|
Generic TPU-Capro | 北美洲 |
This data represents typical values that have been calculated from all products classified as: Generic TPU-Capro
This information is provided for comparative purposes only.
|
IROGRAN® A 92 K 4107 | 北美洲 |
IROGRAN® A 92 K 4107 is a polycaprolactone-based Thermoplastic Polyurethane (TPU) for injection molding applications. Key features are good oil & solvent resistance, low compression set, excellent wear performance, resistance to dynamic stress and short cycle times.
APPLICATIONS
Thick wall technical parts and seals and gaskets.
|
IROGRAN® A 92 K 5031 | 北美洲 |
IROGRAN® A 92 K 5031 is a polyether-based Thermoplastic Polyurethane (TPU) for injection molding applications. Key features are excellent hydrolysis and microbial resistance, good oil & solvent resistance, low compression set, excellent wear performance, durability, short cycle times and robust processing.
APPLICATIONS
Thick wall technical parts, thin wall technical parts and seals and gaskets.
|
IROSTIC® S 6148 | 北美洲 |
IROSTIC® S 6148 is a caprolactone-based, linear, aromatic Thermoplastic Polyurethane (TPU) for solvent-based adhesives. Key features are low crystallization rate, low activation temperature, excellent hydrolysis resistance, good green strength, long open time, good solubility in many solvents including Methyl Ethyl Ketone (MEK), Acetone, MEK/Toluene (8:2) and MEK/Ethyl Acetate (1:1).
APPLICATIONS
Do-it-yourself adhesive, foam bonding, footwear, packaging industry, automotive industry and textile industry.
|
ISOTHANE® 2050D-MH | 北美洲 |
ISOTHANE® 2000 series products are poly(caprolactone) ester based thermoplastic polyurethane. They exhibit excellent mechanical properties, hydrolysis resistant, oil resistance and outstanding low compression set. These products can be injection molded and extruded.
|
ISOTHANE® 2090A-M | 北美洲 |
ISOTHANE® 2000 series products are poly(caprolactone) ester based thermoplastic polyurethane. They exhibit excellent mechanical properties, hydrolysis resistant, oil resistance and outstanding low compression set. These products can be injection molded and extruded.
|
ISOTHANE® 2090A-MH | 北美洲 |
ISOTHANE® 2000 series products are poly(caprolactone) ester based thermoplastic polyurethane. They exhibit excellent mechanical properties, hydrolysis resistant, oil resistance and outstanding low compression set. These products can be injection molded and extruded.
|
ISOTHANE® 2095A-M1 | 北美洲 |
ISOTHANE® 2000 series products are poly(caprolactone) ester based thermoplastic polyurethane. They exhibit excellent mechanical properties, hydrolysis resistant, oil resistance and outstanding low compression set. These products can be injection molded and extruded.
|
ISOTHANE® 2095A-MH | 北美洲 |
ISOTHANE® 2000 series products are poly(caprolactone) ester based thermoplastic polyurethane. They exhibit excellent mechanical properties, hydrolysis resistant, oil resistance and outstanding low compression set. These products can be injection molded and extruded.
|
KRYSTALGRAN™ PN03-221 | 北美洲 |
KRYSTALGRAN® PN03-221 is a polycaprolactone-based Thermoplastic Polyurethane (TPU) for extrusion applications. Key features are UV resistance, abrasion resistance, self-healing, cut and scratch resistance and good low temperature performance.
APPLICATIONS
Film and sheet and surface protective films.
|
LARIPUR® LPR10793A | 北美洲 |
PRODUCTS FOR GASKETS
These are specially developed TPUs for manufacturing hydraulic gaskets or any other application where at high compression set, resistance to oils and/or high temperatures, is required. Two products based on polycaprolactone (2202-95A and 107- 93A) plus one based on Ether (2203-93A) belong to this group depending on the application.
|
LARIPUR® LPR210285E | 北美洲 |
SERIES 2102 POLYCAPROLACTONE ESTER
Products based on polycaprolactones. They behave roughly in the same way as TPU in the Special Ester Series but exhibit a higher resistance to hydrolysis failure.
|
LARIPUR® LPR220295A | 北美洲 |
PRODUCTS FOR GASKETS
These are specially developed TPUs for manufacturing hydraulic gaskets or any other application where at high compression set, resistance to oils and/or high temperatures, is required. Two products based on polycaprolactone (2202-95A and 107- 93A) plus one based on Ether (2203-93A) belong to this group depending on the application.
|
Mirathane™ L90 | 欧洲 | |
Mirathane™ L95 | 欧洲 | |
Mirathane™ S95 | 欧洲 | |
Pearlbond™ 100 | 非洲和中东 |
Pearlbond™ 100 is a linear, polycaprolactone-based polyurethane, supplied in form of small white granules, which combines a very high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives.
APPLICATION
Pearlbond™ 100 is mainly used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.
|
Pearlbond™ 103 | 非洲和中东 |
Pearlbond™ 103 is a linear, polycaprolactone-based polyurethane, supplied in form of small white granules, which combines a very high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives.
APPLICATIONS
Pearlbond™ 103 is mainly used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.
Pearlbond™ 103 is used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process.
|
Pearlbond™ 120 | 北美洲 |
Pearlbond® 120 is a linear, polycaprolactone-based polyurethane, supplied in form of small white granules, which combines an extremely high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives.
APPLICATIONS
Pearlbond® 120 is mainly used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process.
Pearlbond® 120 can be used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.
|
Pearlbond™ 121 | 非洲和中东 |
Pearlbond™ 121 is a linear, polycaprolactone-based polyurethane, supplied in form of small white granules, which combines an extremely high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives.
APPLICATIONS
Pearlbond™ 121 is mainly used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process.
Pearlbond™ 121 can be used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.
|
Pearlbond™ 122 | 非洲和中东 |
Pearlbond™ 122 is a linear, polycaprolactone-based polyurethane, supplied in form of small white granules, which combines an extremely high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives.
APPLICATIONS
Pearlbond™ 122 is mainly used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process.
Pearlbond™ 122 can be used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.
|
Pearlbond™ 123 | 非洲和中东 |
Pearlbond™ 123 is a linear, polycaprolactone-based polyurethane, supplied in form of small white granules, which combines an extremely high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives.
APPLICATIONS
Pearlbond™ 123 is mainly used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process.
Pearlbond™ 123 can be used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.
|
Pearlbond™ 500 | 北美洲 |
Pearlbond™ 500 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 500 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 501 | 北美洲 |
Pearlbond™ 501 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 501 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 503 | 北美洲 |
Pearlbond™ 503 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 503 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 508 | 非洲和中东 |
Pearlbond™ 508 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules, with a high crystallization rate and a medium thermoplasticity level.
APPLICATIONS
Pearlbond™ 508 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 520 | 非洲和中东 |
Pearlbond™ 520 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 520 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 521 | 北美洲 |
Pearlbond™ 521 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 521 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 522 | 非洲和中东 |
Pearlbond™ 522 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 522 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 523 | 非洲和中东 |
Pearlbond™ 523 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 523 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 539 | 非洲和中东 |
Pearlbond® 539 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond® 539 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 550 | 非洲和中东 |
Pearlbond™ 550 is a linear, polycaprolactone-copolyester polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level.
APPLICATIONS
Pearlbond™ 550 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.
|
Pearlbond™ 920 | 非洲和中东 |
Type: Polycaprolactone copolyester-based Aliphatic Thermoplastic Polyurethane with 82 Shore A Hardness.
Features: Translucent resin with excellent color stability upon UV exposure.
Uses: Hotmelt adhesives
APPLICATIONS
Pearlbond™ 920 is suitable for use in blown extrusion, slot-die extrusion, roll coating and powder applications where the following features are of high value to the customer:
- Fast crystallization rate
- Low activation temperature
- Excellent bonding strength
- High resistance to UV
|
Pearlbond™ DIPP-119 | 非洲和中东 |
Pearlbond™ DIPP-119 is polycaprolactone copolyester based thermoplastic polyurethane, supplied in form of translucent pellets. Featuring low melting point and excellent transparency, this product offers excellent flexibility, elasticity and easy processing. Ideally used for extrusion or compounding with PVC.
APPLICATIONS
Pearlbond™ DIPP-119 is used mostly in extrusion applications where low melting point as well as improved adhesion over polar substrates is highly appreciated. It is ideal for PVC compounding. It is also used in solvent coatings on textile substrates.
|
Pearlcoat™ DIPP 119 | 北美洲 |
Type: Pearlcoat™ DIPP 119 is an aromatic polycaprolactone copolyester-based thermoplastic polyurethane.
Main application: Extrusion
Special features: Low melting point, excellent transparency, excellent flexibility, elasticity and easy processing.
|
Pearlstick™ 45-40/08 | 非洲和中东 |
45-40/08 is an elastic, linear, aromatic polyurethane with a very high crystallization rate and a medium thermoplasticity level.
APPLICATIONS: 45-40/08 is used for the production of adhesives for bonding plasticized PVC to plasticized PVC or other materials such as leather, textiles, etc. 45-40/08 enables the production of adhesives for spray application for the automotive and other industrial uses. The addition of a polyfunctional isocyanate improves the heat-resistance and the strength of the joints.
|
Pearlstick™ 45-40/15 | 非洲和中东 |
45-40/15 is an elastic, linear, aromatic polyurethane with a very high crystallization rate and a medium thermoplasticity level.
APPLICATIONS: 45-40/15 is used for the production of adhesives for bonding plasticized PVC to plasticized PVC or other materials such as leather, textiles, etc. 45-40/15 has good resistance to temperature, although the addition of a polyfunctional isocyanate improves the heat-resistance still further.
|
Pearlstick™ 45-40/19 | 非洲和中东 |
Pearlstick® 45-40/19 is an elastic, linear, aromatic polyurethane, supplied in form of white spherical granules with a very high crystallization rate and a medium thermoplasticity level.
APPLICATIONS: 45-40/19 is used for the production of adhesives for bonding plasticized PVC to plasticized PVC or other materials such as leather, textiles, ect. 45-40/19 has a good temperature resistance, although the addition of a polyfunctional isocyanate improves the heat-resistance still further.
|