CALIBRE™ 2061-3
CALIBRE™ 2061-3 Polycarbonate resin is used in medical applications involving steam or ethylene oxide sterilization - though suitability for use in these applications is dependent upon autoclave cycle times and temperatures. CALIBRE 2061-3 provides exceptional clarity, heat resistance, impact strength, and processability, and has low contamination levels. CALIBRE 2061 has been evaluated by certain biocompatibility tests based on ISO 10993-1 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. This product contains mold release.
Main Characteristics
Applications
Main Characteristics
- Tested under ISO 10993
Applications
- Medical Applications
一般属性
使用 Prospector 建立免費帳戶時，可造訪 CALIBRE™ 2061-3 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
文档
可用性
北美洲, 欧洲, 亚太地区
用途
外科器械
加工方式
注射成型
其他属性
添加剂, 特性, 机构评级, 外观, 形式, 密度 / 比重, 密度, 熔流率（熔体流动速率）, 熔流率（熔体流动速率）, 流动方向收缩, 收缩率, 吸水率Sat/23C, 吸水率23C/50RH, 拉伸模量, 拉伸模量, 拉伸屈服强度, 拉伸屈服应力, 拉伸断裂强度, 拉伸断裂应力, 屈服伸长率, 断裂伸长率, 拉伸断裂应变, 弯曲模量, 弯曲模量, 弯曲强度, 弯曲应力, 简支梁缺口冲击强度, 悬壁梁缺口冲击强度, 悬壁梁缺口冲击强度, 装有测量仪表的落镖冲击, 拉伸冲击强度, 洛氏硬度, DTUL (66 psi) - 已退火, DTUL (0.45 MPa) 已退火, DTUL (264 psi) - 未退火, DTUL (1.80 MPa) 未退火, DTUL (264 psi) - 已退火, DTUL (1.80 MPa) 已退火, 维卡软化温度, CLTE，流动, 线性热膨胀系数，流动, 体积电阻率, 介电强度, 相对电容率, 耗散因数, UL 阻燃等级, 折射率, 折射率, 透射率, 雾度, 干燥温度, 干燥时间, 加工（熔体）温度, 模具温度
加工
Find specific processing information for CALIBRE™ Polycarbonate Resins as well as general information for the 聚碳酸酯 generic family. 注册 或 登录 了解更多信息。
