ALKAMIX™ MB6009
ALKAMIX MB6009 is formulated with an antiblock additive at a concentration of 15 percent.
ALKAMIX MB6009 can be added to polythene during extrusion to reduce the blocking tendency of film, particularly where minimum blocking tendency is required. The level required may vary according to desired properties, however the recommended addition level is between 1 to 3 percent.
The maximum level of addition of ALKAMIX MB6009 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 6.5 percent, when added to a polyethylene formulation free of any antiblock additives.
ALKAMIX MB6009 can be added to polythene during extrusion to reduce the blocking tendency of film, particularly where minimum blocking tendency is required. The level required may vary according to desired properties, however the recommended addition level is between 1 to 3 percent.
The maximum level of addition of ALKAMIX MB6009 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 6.5 percent, when added to a polyethylene formulation free of any antiblock additives.
一般属性
使用 Prospector 建立免費帳戶時，可造訪 ALKAMIX™ MB6009 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
可用性
亚太地区
用途
混合
其他属性
添加剂, 特性, 形式, 密度
加工
Find specific processing information for ALKAMIX™ as well as general information for the 线性低密度聚乙烯 generic family. 注册 或 登录 了解更多信息。
