Access over 120,000 technical material datasheets with Prospector!
创建您的免费帐号
Melt Mass-Flow (MFR) and Melt Volume-Flow (MVR) Rate - ISO 1133
Extrusion rate of a resin through an orifice of defined dimensions at a specified temperature and load. Flow rates can be used to differentiate grades or provide a measure of degradation of a material as a result of molding.
| Procedure | Description |
|---|---|
| A | Manual Testing |
| B | Automated Testing |
The testing conditions are most commonly reported as temperature/load (i.e. 190°C/2.16 kg). Occasionally test conditions are represented by a letter code. These letter codes are described below.
| Letter Code | Temperature (°C) | Load (kg) |
|---|---|---|
| A | 250 | 2.16 |
| B | 150 | 2.16 |
| D | 190 | 2.16 |
| E | 190 | 0.325 |
| F | 190 | 10.00 |
| G | 190 | 21.60 |
| H | 200 | 5.00 |
| M | 230 | 2.16 |
| N | 230 | 3.80 |
| S | 280 | 2.16 |
| T | 190 | 5.00 |
| U | 220 | 10.00 |
| W | 300 | 1.20 |
| Z | 125 | 0.325 |
The term Melt Index is commonly used in place of the Melt-Mass Flow Rate for polyethylene at 190°C/2.16 kg.
| Material | Condition |
|---|---|
| PS | 200/5.00 |
| PE | 190/2.16 |
| 190/0.325 | |
| 190/21.60 | |
| 190/5.00 | |
| PP | 230/2.16 |
| ABS | 220/10.00 |
| PS-I | 200/5.00 |
| E/VAC | 150/2.16 |
| 190/2.16 | |
| 125/0.325 | |
| SAN | 220/10.00 |
| ASA, ACS, AES | 220/10.00 |
| PC | 300/1.20 |
| PMMA | 230/3.80 |
| PB | 190/2.16 |
| PB | 190/10.00 |
| POM | 190/2.16 |
| MABS | 220/10.00 |