DINALEN® 20 is low density polyethylene containing no additives. It is primarily intended for blow film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 20 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 20 is extruded at recommended melt temperature range between 175°C and 200°C. Recommended film thickness: 0.050 mm to 0.200 mm.

DINALEN® 30 is low density polyethylene containing no additives. It is primarily intended for blow film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 30 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 30 is extruded at recommended melt temperature range between 165°C and 185°C. Recommended film thickness: 0.030 mm to 0.100 mm.

DINALEN® 35 is low density polyethylene containing additives. It is primarily intended for blow film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 35 exhibits excellent very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 35 is extruded at recommended melt temperature range between 165°C and 185°C. Recommended film thickness: 0.030 mm to 0.100 mm.

DINALEN 50 is low density polyethylene containing no additives. It is primarily intended for blow and cast film extrusion while other processing techniques can be used to a lesser extent. DINALEN 50 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN 50 is extruded at recommended melt temperature range between 160°C and 180° C. Recommended film thickness: 0.025 to 0.060 mm. Application - Thin non-slippery film of high gloss and transparency - Heat shrinkable film with excellent stiffness for industrial bundling - Extruded foams with physical blowing agent - Small diameter pipe extrusion - Wire and cable sheathing - Injection moulded thick-walled products - Blown packaging and other shallow objects - Mixing and co-extrusion with suitable polyolefin grades

DINALEN® 55 is low density polyethylene containing slip and anti-blocking additives. It is primarily intended for blow and cast film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 55 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 55 is extruded at recommended melt temperature range between 160°C and 180°C. Recommended film thickness: 0.25 to 0.05mm. Application - Thin slippery film of high gloss and transparency - Production of film for lamination - Production of film for a variety of primary flexible packaging like FFS for foodstuffs, sanitary articles, chemicals - Film production for a many kinds of carrier-bags, like airport security bags, DTK bags, cooler-bags, T-shirt-bags, shoulder-bags - Blending with DINALEN 50 to obtain a less slippery film - Mixing and co-extrusion with suitable i-polybutene-1 grades to produce film for peel systems - Mixing and co-extrusion with suitable polyolefin grades

DINALEN® 65 is low density polyethylene containing slip and anti-blocking additives. It is intended for thin blow film extrusion. Other processing techniques can be used in less extent. DINALEN® 65 exhibits excellent processability, uniform optical and other properties, depending on its application. It is extruded at temperatures ranging from 140°C to 165°C. DINALEN® 65 gives films of desired properties depending on selected processing parameters such as processing temperature and capacity; blowing ratio, and the height of the frost line. Recommended film thickness : 0.020 mm to 0.040 mm.

DOW ENDURANCE™ HFDB-4201 VC is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound designed for distribution and transmission power cable insulation applications. It has a very low level of contamination and bears the designation Very Clean (VC). DOW ENDURANCE™ HFDB-4201 VC has been designed to have a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance for long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 VC is recommended for the insulation of power distribution and transmission cables rated at less than 150 kV with stresses less than 7 kV/mm. Specifications DOW ENDURANCE™ HFDB-4201 VC is designed for use in power distribution and transmission cables. Cables insulated with DOW ENDURANCE™ HFDB-4201VC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 60502, 60840 - GB/T 12706 - ANSI/ICEA*: S-94-649, S-97-682, S-93-639/NEMA WC74 - CENELEC HD 620 S2 - BSI BS 6622, 7870-4 *Applicable to USA manufactured product only.

Ultrareine Polyethylenverbindung für Extra-Hochspannungsnetzkabelisolierungen HFDK-4201 EHV ist eine natürliche, vernetzbare Polyethylenverbindung extrem hoher Reinheit, die speziell für die Isolierung von EHV-Netzkabeln entwickelt wurde, die hohen elektrischen Beanspruchungen ausgesetzt sind. HFDK-4201 EHV ist mit einem nicht migrierenden Stabilisator ausgestattet, der für hohe Wärme- und Dauerwärmebeständigkeit sowie ein optimales Vernetzungsverhalten sorgt. Spezifikationen: Ultrareines HFDK-4201 EHV erfüllt die Anforderungen der folgenden Normen, wenn es mittels hochmoderner Herstellungsverahren verarbeitet wird: - IEC 62067: >150kV - <500kV - IEC 60840: >30kV - <150k V - AEIC CS9: >45kV - <345kV Anwendungen: HFDK-4201 EHV wird speziell für die Isolierung von Extra-Hochspannungskabeln mit über 220 kV empfohlen.

DOW ENDURANCE™ HFDK-4202 EC Polyethylene Compound is a long life water tree retardant, unfilled, crosslinkable low-density polyethylene compound. The permanent tree retardant additive provides improved performance service involving exposure to moisture while retaining the excellent physical, electrical and processing attributes of crosslinkable polyethylene. DOW ENDURANCE HFDK-4202 EC compound provides electric utilities with: - State-of-the-art "water" tree-retardant technology, consistently outperforming conventional XLPE in all accelerated cable wet aging tests at ambient and elevated temperatures - Technology which has been proven in the field for over 25 years, demonstrating excellent reliability and help achieving lowest life cycle costs - Excellent electrical performance demonstrated by very high aged electrical strength and very low aged dissipation factor and power loss. DOW ENDURANCE HFDK-4202 EC Compound represents the state-of-the-art in tree-retardant, power cable insulation compounds. Specifications DOW ENDURANCE HFDK-4202 EC tree-retardant compound is designed for use in power distribution and sub-transmission cables, especially in underground applications. DOW ENDURANCE HFDK-4202 EC provides improved performance over XLPE cables and is recommended, with or without moisture barriers, for use as cable insulation up to and including 69 kV applications. Cables insulated with DOW ENDURANCE HFDK-4202 EC, using sound commercial manufacturing practice, would be expected to meet the following specifications and regulations: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 (TR-XLPE requirements) - AEIC: CS8 - RUS 50-70 (U-1) - CEA: WCWG-01, WCWG-02 - UL 1072 - IEC: 60502, 60840 - CENELEC: HD 620 S1, Part 1, DIX 3 to 14 - DIN VDE 0276-620 - BSI BS 6622 - GB/T 12706 - DL/T 1070

DOWLEX™ GM AX01 Polyethylene Resin was developed as rheology modifier. The product is intended to be side feeded in low percentage with selected DOW LLDPE Resins portfolio for extrusion processes. It increases melt strength and provide a more shear thinning behavior to the DOW LLDPE achieving enhanced properties such as: extrusion process stability as well as improved mechanical properties for further downgauging, with optimized shrinkage behavior. This unique technology was designed to deliver differentiated properties for collation shrink, agricultural films, lamination and FFS applications. Complies with: - U.S. FDA 21 CFR 174.5 (see notes) Consult the regulations for complete details.

DOW LDPE™ 132G Low Density Polyethylene Resin kann mittels konventioneller Blasfolientechnik bei Schmelztemperaturen zwischen 170 und 230°C extrudiert werden. Dieses Harz weist bei ordnungsgemäßer Herstellung eine ausgezeichnete Kombination aus Verarbeitbarkeit, Steifigkeit und physikalischen Eigenschaften auf. Dieses Harz beinhaltet keine Gleit- und -Antiblock-Zusätze. Hinweis: Erfüllt: U.S. FDA 21 CFR 177.1520(c)2.2 EU, No 10/2011 Vollständige Einzelheiten finden Sie in den Bestimmungen. Anwendungen: - Industriefolie hoher Belastung - Schrumpffolie

- A barefoot resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used in shrink film, shipping sacks, construction film and other gauge film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Consult the regulations for complete details.

- A medium anti-block resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used for thick gauge film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2. - Canadian HPFB No Objections (With Limitations) - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE™ 150E Low Density Polyethylene Resin kann mittels konventioneller Blasfolientechnik bei Schmelztemperaturen zwischen 170 und 230°C extrudiert werden. DOW LDPE 150E Low Density Polyethylene Resin weist bei ordnungsgemäßer Herstellung eine gute Kombination aus Verarbeitbarkeit, Steifigkeit und physikalischen Eigenschaften auf. Hinweis: DOW LDPE 150E Low Density Polyethylene Resin sollte erfüllen: EU, No 10/2011 U.S. FDA 21 CFR 177.1520(c)2.2 U.S. FDA-DMF Vollständige Einzelheiten finden Sie in den Bestimmungen. Anwendungen: - Industriefolie hoher Belastung

DOW LDPE 303E Low Density Polyethylene Resin contains no slip or antiblock additives. DOW LDPE 303E Low Density Polyethylene Resin can readily be extruded using the blown film techniques utilising melt temperatures between 160 and 200 ° C. Main Characteristics: - Good draw down (30µm) - Good mechanical properties. - Good optics Applications: - Industrial and semiindustrial shrink films. - Heavy duty bags. - Construction films Complies with: - Canadian HPFB No Objection - U.S. FDA-DMF - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulation for complete details.

DOW LDPE 305E is a fractional melt index low density polyethylene resin designed for blown film extrusion where good optical properties and an excellent balance of physical properties is required. Main Characteristics: - High optical properties - Excellent tensile and tear strength - Excellent shrink properties Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 310E R is a fractional melt index low density polyethylene resin. DOW LDPE 310E R has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.