Solef® 9009 PVDF homopolymer is a semi-crysalline fluoropolymer. Solef® film is chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents and alcohols. Solef® PVDF flim has a very high purity, abrasion resistance comparable to that of polyamides and relatively low coefficient of friction. These films can be used in a wide range of temperatures and have excellent intrinsic fire resistance. Solef® PVDF films have demonstrated excellent weathering properties and are extremely resistant to UV radiation and common industrial and environmental pollutants. Solef® PVDF films can be used in a wide range of applications, including release films, filters, chemical resistance lining, outdoor UV resistant needs as well as electric and electronic applications.

Solvadura™ 08/1001 is a low-viscosity PVDF resin mainly for film extrusion applications.

Solvadura™ 10/1001 is a medium-viscosity PVDF resin mainly for film extrusion applications.

Aquivion® D72-25BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 720 g/eq. Polymer concentration is 25 %w/w. Solvent system is >99 %w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The ionomer dispersions contain its acid form (-SO3H) and are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivion dispersions can also be used for the productions of membranes, supported or not by ePTFE or woven reinforcements. Please visit Syensqo.com for more information.

Aquivion® D79-25BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 790 g/eq. Polymer concentration is 25% w/w. Solvent system is >99% w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The perfluorosulfonic acid ionomer dispersions contain its acid form (-SO3H) and are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivon dispersions can also be used for the production of membranes, supported or not by ePTFE or woven reinforcements.

Aquivion® D87-28BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 870 g/eq. Polymer concentration is 28 %w/w. Solvent system is >99 %w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The ionomer dispersions contain its acid form (-SO3H) are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivion dispersions can also be used for the production of membranes, supported or not by ePTFE or woven reinforcements. Please visit Syensqo.com for more information.

Aquivion® D98-25BS is a perfluorosulfonic acid ionomer dispersion that exhibits an Equivalent Weight (EW) of 980 g/eq. Polymer concentration is 25 %w/w. Solvent system is >99 %w/w water and is free of ethers. Aquivion® dispersions are based on the unique Short Side Chain copolymer of Tetrafluoroethylene (TFE) and Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-CF2CF2-SO2F produced by Syensqo. The ionomer dispersions contain its acid form (-SO3H) are available in various EWs. Aquivion dispersions can be used by the customer to manufacture dispersions based on a variety of solvent blends. These dispersions are suitable for electrode binder applications of electrochemical devices including fuel cells, electrolyzers and potentially Power to X electrochemical devices. Aquivion dispersions can also be used for the production of membranes, supported or not by ePTFE or woven reinforcements. Please visit Syensqo.com for more information.

Algoflon® L203 R is a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micron sized primary particles. Algoflon® L203 R can be de-agglomerated to sub-micron particle size by the application of shear providing a better dispersion and distribution of the PTFE particles in the application. Algoflon® L203 R is designed for use as additive in critical engineering and high-end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants. Main features of Algoflon® L203 R include: - High specific surface area - Low molecular weight - Good blendability - Deaglomerated under shear - Improved lubricity - Reduced friction and wear

Algoflon® L206 R is a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micron sized primary particles. Algoflon® L206 R can be de-agglomerated to sub-micron particle size by the application of shear providing a better dispersion and distribution of the PTFE particles in the application. Algoflon® L206 R is designed for use as additive in critical engineering and high-end performance host materials such as thermoplastics, elastomers, coatings, inks and lubricants. Main features of Algoflon® L206 R include: - High specific surface area - Low molecular weight - Good blendability - Deaglomerated under shear - Improved lubricity - Reduced friction and wear

Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55°C to 270°C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing.

Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55 °C to 270 °C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing.

Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55°C to 270°C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing.

Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55°C to 270°C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing.

Galden® PFPE electronic fluids is a line of dielectric fluids with boiling points ranging from 55°C to 270°C. Their excellent dielectric properties, high chemical and thermal stability combined with their capacity to operate at very low as well as elevated temperatures make them ideal for electronic quality testing.

Galden® LS/HS is a line of fully fluorinated fluids specifically designed for the Vapor Phase Soldering process. The narrow molecular weight distribution as well as the very strong carbon-fluorine bond and the flexible ether link provide the properties which make Galden® LS/HS ideal for use in VPS.

Galden® LS/HS is a line of fully fluorinated fluids specifically designed for the Vapor Phase Soldering process. The narrow molecular weight distribution as well as the very strong carbon-fluorine bond and the flexible ether link provide the properties which make Galden® LS/HS ideal for use in VPS.

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear"

Galden® HT PFPE are inert, dielectric and high-performance heat transfer fluids with boiling points ranging from 55°C to 270°C. This range is broader than other fluorinated heat transfer fluids and enables PFPE to be used at end-use temperatures up to 290°C. Syensqo offers a reliable and non-flammable Heat Transfer (HT) media for demanding applications, including: - Semiconductor - Chemical - Pharmaceutical - Vapor phase heating - Transformer and super computer cooling - Recirculating chillers - Nuclear"

Galden® LS/HS is a line of fully fluorinated fluids specifically designed for the Vapor Phase Soldering process. The narrow molecular weight distribution as well as the very strong carbon-fluorine bond and the flexible ether link provide the properties which make Galden® LS/HS ideal for use in VPS.

Galden® LS/HS is a line of fully fluorinated fluids specifically designed for the Vapor Phase Soldering process. The narrow molecular weight distribution as well as the very strong carbon-fluorine bond and the flexible ether link provide the properties which make Galden® LS/HS ideal for use in VPS.

Galden® LS/HS is a line of fully fluorinated fluids specifically designed for the Vapor Phase Soldering process. The narrow molecular weight distribution as well as the very strong carbon-fluorine bond and the flexible ether link provide the properties which make Galden® LS/HS ideal for use in VPS.

Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.

Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.

Solef® 1010/0HP1 PVDF is a medium viscosity homopolymer resin typically processed by extrusion.

ソレフ® 1015 PVDF ホモポリマーは、メンブレンの製造に適した非常に高い粘度を有します。パウダー形式だけで提供されます。

Solef® 11008/0003 PVDF is a low viscosity flexible PVDF copolymer resin and is typically processed by extrusion or injection molding.

ソレフ® 11010 PVDF は中程度の粘度を持つ柔軟性の高い PVDF コポリマー樹脂で、一般に押出成形により加工されます。

Solef® 2042 Latex is an aqueous stabilized dispersion that contains approximately 25% by weight of a high molecular weight chemically modified PVDF copolymer (polyvinylidene fluoride) of medium crystallinity, that gives high adhesion to ceramics and separators in combination with low swelling, ideal for its usage in lithium batteries. Solef® 2042 Latex is useful for applications such as water-based impregnation of separators in Li-Ion batteries and energy storage devices. The main properties of Solef® 2042 Latex are: - Good adhesion to separator and to ceramics - Low swelling in electrolyte - Good wettability by electrolyte - Good flexibility - Good lamination to electrodes

ソレフ® 21510 PVDF コポリマーは中程度の粘度を持ち、押出成形やリチウム電池用途の溶液状態での加工に適しています。

Solef® 3108/0903 is a low viscosity PVDF resin, it is anti-static and typically processed by extrusion.

Solef® 31508/0003 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.

Solef® 31508/0009 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.

ソレフ® 31508 PVDF コポリマーは、ワイヤ・ケーブル用途向けの低粘度で非常に柔軟性の高いグレードです。